MOLTEN 2024 | Program

MOLTEN 2024 Program

The conference program is subject to change at any time, at the discretion of the organising committee.

All times are listed below in AEDT (Brisbane, Australia).

Sunday, June 16, 2024

	Pre-Conference Workshops	Pre Conference Workshops
9:30 AM - 4:30 PM	The FactSage Workshop	The Fundamentals of Slag Chemistry workshop
6:00 PM - 8:00 PM	Welcome Reception I Sunday 16 June 2024

	Pre-Conference Workshops	Pre Conference Workshops
9:30 AM - 4:30 PM	The FactSage Workshop	The Fundamentals of Slag Chemistry workshop
6:00 PM - 8:00 PM	Welcome Reception I Sunday 16 June 2024

	Pre-Conference Workshops
9:30 AM - 4:30 PM	The FactSage Workshop
6:00 PM - 8:00 PM	Welcome Reception I Sunday 16 June 2024

	Pre Conference Workshops
9:30 AM - 4:30 PM	The Fundamentals of Slag Chemistry workshop
6:00 PM - 8:00 PM	Welcome Reception I Sunday 16 June 2024

Monday, June 17, 2024

	Boulevard Auditorium	Boulevard B1	Boulevard B2	Boulevard B3
8:30 AM - 9:50 AM	Day 1 Opening Session Welcome to Country ., Welcome from Chairs Evgueni Jak, PYROSEARCH, University of Queensland Welcome from AusIMM Stephen Durkin, AusIMM Ministerial Welcome Mark Jacobs, Queensland Department of Environment, Science and Innovation PLENARY \| Physicochemical properties of steelmaking slags for the mitigation of CO2 emissions in steel sector Joohyun Park, Hanyang University
9:50 AM - 10:20 AM	Day 1 Morning Tea
10:20 AM - 12:10 PM	Session 1 \| Slag Fundamentals KEYNOTE \| Slag-steel reactions in the refining of advanced high-strength steel Chris Pistorius, Carnegie Mellon University Perspectives of chemical metallurgy fundamentals in slag innovation Sanghoon Lee, Yonsei University Theoretical and experimental approaches to determine the mass transfer coefficient in the steel/slag/refractory system Manuel Schickbichler, Christian Doppler Laboratory for Inclusion Metallurgy in Advanced Steelmaking Characterizing bubble size distribution and generation position in iron oxide-containing slag smelting reduction Ko-ichiro Ohno, Kyushu University	Session 4 \| T/D and Process Modelling KEYNOTE \| Pyrometallurgical process simulations using CALPHAD thermodynamic databases In-Ho Jung, Seoul National University Continuous method of thermodynamic optimization using first-derivative matrices for large multicomponent systems Evgenii Nekhoroshev, PYROSEARCH, University of Queensland Pushing the boundaries of slag operability: Processing of High-MgO nickel concentrates with the Ausmelt® TSL process Jacob Wood, Metso Australia Pty Ltd Integrated process modelling for the Kalgoorlie nickel smelter Georgia Sartor, Hatch Pty Ltd	Session 7 \| Ferrosilicon and Ferrochromium KEYNOTE \| Reducing CO2 emissions from the ferro-alloy and silicon production Merete Tangstad, Norwegian University of Science and Technology (NTNU) Effect of slag composition on titanium distribution ratio between ferrosilicon melt and CaO-SiO2-Al2O3 slag at 1773K Minjoo Lee, Hanyang University An attempt towards ferrochromium production using molten oxide electrolysis Lassi Klemettinen, Aalto University Ferroalloy extraction from a Zimbabwean ore using a closed DC furnace Edson Kugara Chiwandika, Harare Institute of Technology	Session 10 \| Phase Diagram Studies KEYNOTE \| Advancement in experimental methodologies to produce phase equilibria and thermodynamic data in multicomponent systems Maksym Shevchenko, PYROSEARCH, University of Queensland Phase diagram study and thermodynamic modeling of the CaO-TiO2-CaF2 system Jiho Bang, Seoul National University Thermodynamic behavior of TiO2 in CaO-Al2O3–based slags at high temperatures Dongyul Jung, Hanyang University Thermal analysis of molten salts and their mixtures with metals Dmitry Sergeev, NETZSCH-Gerätebau GmbH
12:10 PM - 1:10 PM	Day 1 Lunch
1:10 PM - 2:50 PM	Session 2 \| Recycling of Slags Dissolution behaviors of recycled cement paste and lime in simulated EAF slag under static condition Mingrui Yang, University of Warwick The effect of FeO/SiO2 ratio on the feasibility of utilizing iron silicate slags as supplementary cementitious materials Anton Andersson, Luleå University of Technology Conversion of Hard-to-use Wastes to New Raw Materials for Low-Energy Glass/Mineral-Wool Manufacturing Mingrui Yang, University of Warwick Selective reduction of iron and effective enrichment of vanadium from vanadium slag by carbothermic reduction Shiyuan Liu, University of Science and Technology Beijing	Session 5 \| Non-Ferrous Experimental and thermodynamic study of the phase equilibria in the NiO-CaO-FeO-Fe2O3 system in air and in equilibrium with metal (Fe-Ni) alloy Svetlana Sineva, University of Queensland Slag-metal interfacial reactions in pyrometallurgical processing of industrial wastes for recovery of valuable metals Hyunju Kim, Hanyang University Overview of the experimental phase equilibria studies of the Ni-Sn-S, Cu-Sb-S, Cu-Sn-S, Fe-Sb-As, and Fe-Sn-As systems Modassir Akhtar, University of Queensland Direct observation of the fayalite slag formation behavior from large SiO2 grains Yuko Goto, Sumitomo Metal Mining Co., Ltd	Session 8 \| Hydrogen Reduction Hydrogen plasma in extractive metallurgy application Bima Satritama, Swinburne University of Technology Flux smelting behavior of pre-reduced Mn ore by hydrogen at elevated temperatures Pankaj Kumar, Norwegian University of Science And Technology (NTNU) A Short Review: Hydrogen Reduction of Copper-Containing Resources Dian Mughni Fellicia, Swinburne University of Technology Transient slag behaviour in the DRI and scrap based EAF process: Case study for high and low grade DRI input Saikat Chatterjee, Tata Steel, R&D, IJmuiden	Session 11 \| Molten Salts The extraction of white phosphorus from molten salt Xiao Yang, Westlake University Electrolytic reduction of metal sulfides/oxides in molten salts for sustainable metal production Xianfeng Hu, Swerim AB Electrodeposition and electrochemical behavior of molybdenum ions in ZnCl2-NaCl-KCl molten salt Jianxun Song, Zhengzhou University Deoxidation of Ti-Ni alloy by the calcium and binary halide fluxes Yao Su, Hanyang University
2:50 PM - 3:20 PM	Day 1 Afternoon Tea
3:20 PM - 5:25 PM	Session 3 \| Slag/Steel Study on change in mould slag characteristics during casting Ti containing steel grades Preeti Prakash Sahoo, Tata Steel Ltd Carbon distribution behavior between molten iron and CaO-Al2O3-FeO-SiO2-MgO slag at 1873 K Yeong Jin Jun, Hanyang University Prognostic models for electroslag remelting process and slag engineering Ganna Stovpchenko, China First Heavy Industries Characterization and assessment of B2O3 added LF Slag Shaik Mahaboob Basha, Tata Steel Ltd Sulfur loss from the slag during desulfurization of liquid steel Deepoo Kumar, Indian Institute of Technology, Bombay	Session 6 \| Non-Ferrous Phase equilibria study in the sodium metasilicate primary phase field in PbO-Na2O-SiO2 system between 800 and 1000 °C Xi Ling, University of Toronto Experimental study and thermodynamic modeling of phase equilibria in the FeO-FeO1.5-SbO1.5-SiO2 system in equilibrium with metal Hamed Abdeyazdan, University of Queensland Monitoring Sb in lead refining using advanced techniques in Industry 4.0 Amy Van den Bulck, Umicore NV CFD modeling of slag fuming, with a focus on freeze-lining formation Christian Rodrigues, Montanuniversität Leoben Studying the smelting behavior of bauxite residue pellets reduced by hydrogen using high temperature thermal analysis Dali Hariswijaya, Norges Teknisk-Naturvitenskapelige Universitet	Session 9 \| Physicochem. Props. Modelling of Liquid/Liquid Interface Movement during Spindle Rotation of Refractory - Slag Corrosion Test Hana Lee, Tech University of Korea Viscosity of CaO-aluminosilicate Slags Ramana Reddy, The University of Alabama Viscosity of foaming fluid measured by falling ball method Shigeru Ueda, Tohoku University A combined molecular dynamics - Experimental investigation of oxidic slag properties Inge Bellemans, Ghent University On the development of a viscosity model for molten multicomponent slag systems with several glass-forming, amphoteric and modifier oxides Alex Kondratiev, Lomonosov Moscow State University	Session 12 \| Molten Salts Synthesis of actinide chlorides for molten salt preparation Pierrick Chevreux, CEA Melting behaviour investigation of municipal solid waste incineration fly ash samples from different incineration technologies for metal recovery: An integrated experimental and thermodynamic modelling approach Ece Soylu, Norwegian University of Science and Technology (NTNU) Calcium based ternary nitrate salts for concentrating solar power applications Pranjal Gandhre, Somaiya Vidyavihar University
5:30 PM - 7:30 PM	Poster Meet & Greet I Monday 17 June 2024

	Boulevard Auditorium	Boulevard B1
8:30 AM - 9:50 AM	Day 1 Opening Session Welcome to Country ., Welcome from Chairs Evgueni Jak, PYROSEARCH, University of Queensland Welcome from AusIMM Stephen Durkin, AusIMM Ministerial Welcome Mark Jacobs, Queensland Department of Environment, Science and Innovation PLENARY \| Physicochemical properties of steelmaking slags for the mitigation of CO2 emissions in steel sector Joohyun Park, Hanyang University
9:50 AM - 10:20 AM	Day 1 Morning Tea
10:20 AM - 12:10 PM	Session 1 \| Slag Fundamentals KEYNOTE \| Slag-steel reactions in the refining of advanced high-strength steel Chris Pistorius, Carnegie Mellon University Perspectives of chemical metallurgy fundamentals in slag innovation Sanghoon Lee, Yonsei University Theoretical and experimental approaches to determine the mass transfer coefficient in the steel/slag/refractory system Manuel Schickbichler, Christian Doppler Laboratory for Inclusion Metallurgy in Advanced Steelmaking Characterizing bubble size distribution and generation position in iron oxide-containing slag smelting reduction Ko-ichiro Ohno, Kyushu University	Session 4 \| T/D and Process Modelling KEYNOTE \| Pyrometallurgical process simulations using CALPHAD thermodynamic databases In-Ho Jung, Seoul National University Continuous method of thermodynamic optimization using first-derivative matrices for large multicomponent systems Evgenii Nekhoroshev, PYROSEARCH, University of Queensland Pushing the boundaries of slag operability: Processing of High-MgO nickel concentrates with the Ausmelt® TSL process Jacob Wood, Metso Australia Pty Ltd Integrated process modelling for the Kalgoorlie nickel smelter Georgia Sartor, Hatch Pty Ltd
12:10 PM - 1:10 PM	Day 1 Lunch
1:10 PM - 2:50 PM	Session 2 \| Recycling of Slags Dissolution behaviors of recycled cement paste and lime in simulated EAF slag under static condition Mingrui Yang, University of Warwick The effect of FeO/SiO2 ratio on the feasibility of utilizing iron silicate slags as supplementary cementitious materials Anton Andersson, Luleå University of Technology Conversion of Hard-to-use Wastes to New Raw Materials for Low-Energy Glass/Mineral-Wool Manufacturing Mingrui Yang, University of Warwick Selective reduction of iron and effective enrichment of vanadium from vanadium slag by carbothermic reduction Shiyuan Liu, University of Science and Technology Beijing	Session 5 \| Non-Ferrous Experimental and thermodynamic study of the phase equilibria in the NiO-CaO-FeO-Fe2O3 system in air and in equilibrium with metal (Fe-Ni) alloy Svetlana Sineva, University of Queensland Slag-metal interfacial reactions in pyrometallurgical processing of industrial wastes for recovery of valuable metals Hyunju Kim, Hanyang University Overview of the experimental phase equilibria studies of the Ni-Sn-S, Cu-Sb-S, Cu-Sn-S, Fe-Sb-As, and Fe-Sn-As systems Modassir Akhtar, University of Queensland Direct observation of the fayalite slag formation behavior from large SiO2 grains Yuko Goto, Sumitomo Metal Mining Co., Ltd
2:50 PM - 3:20 PM	Day 1 Afternoon Tea
3:20 PM - 5:25 PM	Session 3 \| Slag/Steel Study on change in mould slag characteristics during casting Ti containing steel grades Preeti Prakash Sahoo, Tata Steel Ltd Carbon distribution behavior between molten iron and CaO-Al2O3-FeO-SiO2-MgO slag at 1873 K Yeong Jin Jun, Hanyang University Prognostic models for electroslag remelting process and slag engineering Ganna Stovpchenko, China First Heavy Industries Characterization and assessment of B2O3 added LF Slag Shaik Mahaboob Basha, Tata Steel Ltd Sulfur loss from the slag during desulfurization of liquid steel Deepoo Kumar, Indian Institute of Technology, Bombay	Session 6 \| Non-Ferrous Phase equilibria study in the sodium metasilicate primary phase field in PbO-Na2O-SiO2 system between 800 and 1000 °C Xi Ling, University of Toronto Experimental study and thermodynamic modeling of phase equilibria in the FeO-FeO1.5-SbO1.5-SiO2 system in equilibrium with metal Hamed Abdeyazdan, University of Queensland Monitoring Sb in lead refining using advanced techniques in Industry 4.0 Amy Van den Bulck, Umicore NV CFD modeling of slag fuming, with a focus on freeze-lining formation Christian Rodrigues, Montanuniversität Leoben Studying the smelting behavior of bauxite residue pellets reduced by hydrogen using high temperature thermal analysis Dali Hariswijaya, Norges Teknisk-Naturvitenskapelige Universitet
5:30 PM - 7:30 PM	Poster Meet & Greet I Monday 17 June 2024

	Boulevard B2	Boulevard B3
8:30 AM - 9:50 AM
9:50 AM - 10:20 AM	Day 1 Morning Tea
10:20 AM - 12:10 PM	Session 7 \| Ferrosilicon and Ferrochromium KEYNOTE \| Reducing CO2 emissions from the ferro-alloy and silicon production Merete Tangstad, Norwegian University of Science and Technology (NTNU) Effect of slag composition on titanium distribution ratio between ferrosilicon melt and CaO-SiO2-Al2O3 slag at 1773K Minjoo Lee, Hanyang University An attempt towards ferrochromium production using molten oxide electrolysis Lassi Klemettinen, Aalto University Ferroalloy extraction from a Zimbabwean ore using a closed DC furnace Edson Kugara Chiwandika, Harare Institute of Technology	Session 10 \| Phase Diagram Studies KEYNOTE \| Advancement in experimental methodologies to produce phase equilibria and thermodynamic data in multicomponent systems Maksym Shevchenko, PYROSEARCH, University of Queensland Phase diagram study and thermodynamic modeling of the CaO-TiO2-CaF2 system Jiho Bang, Seoul National University Thermodynamic behavior of TiO2 in CaO-Al2O3–based slags at high temperatures Dongyul Jung, Hanyang University Thermal analysis of molten salts and their mixtures with metals Dmitry Sergeev, NETZSCH-Gerätebau GmbH
12:10 PM - 1:10 PM	Day 1 Lunch
1:10 PM - 2:50 PM	Session 8 \| Hydrogen Reduction Hydrogen plasma in extractive metallurgy application Bima Satritama, Swinburne University of Technology Flux smelting behavior of pre-reduced Mn ore by hydrogen at elevated temperatures Pankaj Kumar, Norwegian University of Science And Technology (NTNU) A Short Review: Hydrogen Reduction of Copper-Containing Resources Dian Mughni Fellicia, Swinburne University of Technology Transient slag behaviour in the DRI and scrap based EAF process: Case study for high and low grade DRI input Saikat Chatterjee, Tata Steel, R&D, IJmuiden	Session 11 \| Molten Salts The extraction of white phosphorus from molten salt Xiao Yang, Westlake University Electrolytic reduction of metal sulfides/oxides in molten salts for sustainable metal production Xianfeng Hu, Swerim AB Electrodeposition and electrochemical behavior of molybdenum ions in ZnCl2-NaCl-KCl molten salt Jianxun Song, Zhengzhou University Deoxidation of Ti-Ni alloy by the calcium and binary halide fluxes Yao Su, Hanyang University
2:50 PM - 3:20 PM	Day 1 Afternoon Tea
3:20 PM - 5:25 PM	Session 9 \| Physicochem. Props. Modelling of Liquid/Liquid Interface Movement during Spindle Rotation of Refractory - Slag Corrosion Test Hana Lee, Tech University of Korea Viscosity of CaO-aluminosilicate Slags Ramana Reddy, The University of Alabama Viscosity of foaming fluid measured by falling ball method Shigeru Ueda, Tohoku University A combined molecular dynamics - Experimental investigation of oxidic slag properties Inge Bellemans, Ghent University On the development of a viscosity model for molten multicomponent slag systems with several glass-forming, amphoteric and modifier oxides Alex Kondratiev, Lomonosov Moscow State University	Session 12 \| Molten Salts Synthesis of actinide chlorides for molten salt preparation Pierrick Chevreux, CEA Melting behaviour investigation of municipal solid waste incineration fly ash samples from different incineration technologies for metal recovery: An integrated experimental and thermodynamic modelling approach Ece Soylu, Norwegian University of Science and Technology (NTNU) Calcium based ternary nitrate salts for concentrating solar power applications Pranjal Gandhre, Somaiya Vidyavihar University
5:30 PM - 7:30 PM	Poster Meet & Greet I Monday 17 June 2024

	Boulevard Auditorium
8:30 AM - 9:50 AM	Day 1 Opening Session Welcome to Country ., Welcome from Chairs Evgueni Jak, PYROSEARCH, University of Queensland Welcome from AusIMM Stephen Durkin, AusIMM Ministerial Welcome Mark Jacobs, Queensland Department of Environment, Science and Innovation PLENARY \| Physicochemical properties of steelmaking slags for the mitigation of CO2 emissions in steel sector Joohyun Park, Hanyang University
9:50 AM - 10:20 AM	Day 1 Morning Tea
10:20 AM - 12:10 PM	Session 1 \| Slag Fundamentals KEYNOTE \| Slag-steel reactions in the refining of advanced high-strength steel Chris Pistorius, Carnegie Mellon University Perspectives of chemical metallurgy fundamentals in slag innovation Sanghoon Lee, Yonsei University Theoretical and experimental approaches to determine the mass transfer coefficient in the steel/slag/refractory system Manuel Schickbichler, Christian Doppler Laboratory for Inclusion Metallurgy in Advanced Steelmaking Characterizing bubble size distribution and generation position in iron oxide-containing slag smelting reduction Ko-ichiro Ohno, Kyushu University
12:10 PM - 1:10 PM	Day 1 Lunch
1:10 PM - 2:50 PM	Session 2 \| Recycling of Slags Dissolution behaviors of recycled cement paste and lime in simulated EAF slag under static condition Mingrui Yang, University of Warwick The effect of FeO/SiO2 ratio on the feasibility of utilizing iron silicate slags as supplementary cementitious materials Anton Andersson, Luleå University of Technology Conversion of Hard-to-use Wastes to New Raw Materials for Low-Energy Glass/Mineral-Wool Manufacturing Mingrui Yang, University of Warwick Selective reduction of iron and effective enrichment of vanadium from vanadium slag by carbothermic reduction Shiyuan Liu, University of Science and Technology Beijing
2:50 PM - 3:20 PM	Day 1 Afternoon Tea
3:20 PM - 5:25 PM	Session 3 \| Slag/Steel Study on change in mould slag characteristics during casting Ti containing steel grades Preeti Prakash Sahoo, Tata Steel Ltd Carbon distribution behavior between molten iron and CaO-Al2O3-FeO-SiO2-MgO slag at 1873 K Yeong Jin Jun, Hanyang University Prognostic models for electroslag remelting process and slag engineering Ganna Stovpchenko, China First Heavy Industries Characterization and assessment of B2O3 added LF Slag Shaik Mahaboob Basha, Tata Steel Ltd Sulfur loss from the slag during desulfurization of liquid steel Deepoo Kumar, Indian Institute of Technology, Bombay
5:30 PM - 7:30 PM	Poster Meet & Greet I Monday 17 June 2024

	Boulevard B1
8:30 AM - 9:50 AM
9:50 AM - 10:20 AM	Day 1 Morning Tea
10:20 AM - 12:10 PM	Session 4 \| T/D and Process Modelling KEYNOTE \| Pyrometallurgical process simulations using CALPHAD thermodynamic databases In-Ho Jung, Seoul National University Continuous method of thermodynamic optimization using first-derivative matrices for large multicomponent systems Evgenii Nekhoroshev, PYROSEARCH, University of Queensland Pushing the boundaries of slag operability: Processing of High-MgO nickel concentrates with the Ausmelt® TSL process Jacob Wood, Metso Australia Pty Ltd Integrated process modelling for the Kalgoorlie nickel smelter Georgia Sartor, Hatch Pty Ltd
12:10 PM - 1:10 PM	Day 1 Lunch
1:10 PM - 2:50 PM	Session 5 \| Non-Ferrous Experimental and thermodynamic study of the phase equilibria in the NiO-CaO-FeO-Fe2O3 system in air and in equilibrium with metal (Fe-Ni) alloy Svetlana Sineva, University of Queensland Slag-metal interfacial reactions in pyrometallurgical processing of industrial wastes for recovery of valuable metals Hyunju Kim, Hanyang University Overview of the experimental phase equilibria studies of the Ni-Sn-S, Cu-Sb-S, Cu-Sn-S, Fe-Sb-As, and Fe-Sn-As systems Modassir Akhtar, University of Queensland Direct observation of the fayalite slag formation behavior from large SiO2 grains Yuko Goto, Sumitomo Metal Mining Co., Ltd
2:50 PM - 3:20 PM	Day 1 Afternoon Tea
3:20 PM - 5:25 PM	Session 6 \| Non-Ferrous Phase equilibria study in the sodium metasilicate primary phase field in PbO-Na2O-SiO2 system between 800 and 1000 °C Xi Ling, University of Toronto Experimental study and thermodynamic modeling of phase equilibria in the FeO-FeO1.5-SbO1.5-SiO2 system in equilibrium with metal Hamed Abdeyazdan, University of Queensland Monitoring Sb in lead refining using advanced techniques in Industry 4.0 Amy Van den Bulck, Umicore NV CFD modeling of slag fuming, with a focus on freeze-lining formation Christian Rodrigues, Montanuniversität Leoben Studying the smelting behavior of bauxite residue pellets reduced by hydrogen using high temperature thermal analysis Dali Hariswijaya, Norges Teknisk-Naturvitenskapelige Universitet
5:30 PM - 7:30 PM	Poster Meet & Greet I Monday 17 June 2024

	Boulevard B2
8:30 AM - 9:50 AM
9:50 AM - 10:20 AM	Day 1 Morning Tea
10:20 AM - 12:10 PM	Session 7 \| Ferrosilicon and Ferrochromium KEYNOTE \| Reducing CO2 emissions from the ferro-alloy and silicon production Merete Tangstad, Norwegian University of Science and Technology (NTNU) Effect of slag composition on titanium distribution ratio between ferrosilicon melt and CaO-SiO2-Al2O3 slag at 1773K Minjoo Lee, Hanyang University An attempt towards ferrochromium production using molten oxide electrolysis Lassi Klemettinen, Aalto University Ferroalloy extraction from a Zimbabwean ore using a closed DC furnace Edson Kugara Chiwandika, Harare Institute of Technology
12:10 PM - 1:10 PM	Day 1 Lunch
1:10 PM - 2:50 PM	Session 8 \| Hydrogen Reduction Hydrogen plasma in extractive metallurgy application Bima Satritama, Swinburne University of Technology Flux smelting behavior of pre-reduced Mn ore by hydrogen at elevated temperatures Pankaj Kumar, Norwegian University of Science And Technology (NTNU) A Short Review: Hydrogen Reduction of Copper-Containing Resources Dian Mughni Fellicia, Swinburne University of Technology Transient slag behaviour in the DRI and scrap based EAF process: Case study for high and low grade DRI input Saikat Chatterjee, Tata Steel, R&D, IJmuiden
2:50 PM - 3:20 PM	Day 1 Afternoon Tea
3:20 PM - 5:25 PM	Session 9 \| Physicochem. Props. Modelling of Liquid/Liquid Interface Movement during Spindle Rotation of Refractory - Slag Corrosion Test Hana Lee, Tech University of Korea Viscosity of CaO-aluminosilicate Slags Ramana Reddy, The University of Alabama Viscosity of foaming fluid measured by falling ball method Shigeru Ueda, Tohoku University A combined molecular dynamics - Experimental investigation of oxidic slag properties Inge Bellemans, Ghent University On the development of a viscosity model for molten multicomponent slag systems with several glass-forming, amphoteric and modifier oxides Alex Kondratiev, Lomonosov Moscow State University
5:30 PM - 7:30 PM	Poster Meet & Greet I Monday 17 June 2024

	Boulevard B3
8:30 AM - 9:50 AM
9:50 AM - 10:20 AM	Day 1 Morning Tea
10:20 AM - 12:10 PM	Session 10 \| Phase Diagram Studies KEYNOTE \| Advancement in experimental methodologies to produce phase equilibria and thermodynamic data in multicomponent systems Maksym Shevchenko, PYROSEARCH, University of Queensland Phase diagram study and thermodynamic modeling of the CaO-TiO2-CaF2 system Jiho Bang, Seoul National University Thermodynamic behavior of TiO2 in CaO-Al2O3–based slags at high temperatures Dongyul Jung, Hanyang University Thermal analysis of molten salts and their mixtures with metals Dmitry Sergeev, NETZSCH-Gerätebau GmbH
12:10 PM - 1:10 PM	Day 1 Lunch
1:10 PM - 2:50 PM	Session 11 \| Molten Salts The extraction of white phosphorus from molten salt Xiao Yang, Westlake University Electrolytic reduction of metal sulfides/oxides in molten salts for sustainable metal production Xianfeng Hu, Swerim AB Electrodeposition and electrochemical behavior of molybdenum ions in ZnCl2-NaCl-KCl molten salt Jianxun Song, Zhengzhou University Deoxidation of Ti-Ni alloy by the calcium and binary halide fluxes Yao Su, Hanyang University
2:50 PM - 3:20 PM	Day 1 Afternoon Tea
3:20 PM - 5:25 PM	Session 12 \| Molten Salts Synthesis of actinide chlorides for molten salt preparation Pierrick Chevreux, CEA Melting behaviour investigation of municipal solid waste incineration fly ash samples from different incineration technologies for metal recovery: An integrated experimental and thermodynamic modelling approach Ece Soylu, Norwegian University of Science and Technology (NTNU) Calcium based ternary nitrate salts for concentrating solar power applications Pranjal Gandhre, Somaiya Vidyavihar University
5:30 PM - 7:30 PM	Poster Meet & Greet I Monday 17 June 2024

Tuesday, June 18, 2024

	Boulevard Auditorium	Boulevard B1	Boulevard B2	Boulevard B3
8:25 AM - 9:50 AM	Day 2 Opening Session Wrap Up from Day 1 Peter Hayes, PYROSEARCH, University of Queensland PLENARY \| Challenges facing non-ferrous metal production Daniel Lindberg, Aalto University PLENARY \| Fusion of molten phase R&D into the metallurgical industry to drive circularity Stanko Nikolic, Glencore Technology
9:50 AM - 10:20 AM	Day 2 Morning Tea
10:20 AM - 12:10 PM	Session 13 \| Steelmaking KEYNOTE \| Recent advances in understanding phosphorus in oxygen steelmaking Geoffrey Brooks, Swinburne Univesity of Technology Reoxidation of Al-killed ultra-low C steel by FetO in CaO-Al2O3-MgOsat.-FetO slag representing RH slag by experiment and kinetic modeling Youn-Bae Kang, Pohang University of Science and Technology (POSTECH) Effect of MgO content on phase evolution during steelmaking slag cooling process Wenfeng Gu, Tohoku University On stability of CaS in liquid steel containing alumina or spinel inclusions Sandeep Kumar, Indian Institute of Technology, Bombay	Session 16 \| Non-Ferrous KEYNOTE \| Challenges and limitations in development of large thermodynamic database for multiple molten phases using Modified Quasichemical Formalism Denis Shishin, University of Queensland Impurity capacities of non-ferrous slags Ramana Reddy, The University of Alabama Improving industrial copper processing operations through the application of thermodynamic fundamentals and advanced predictive tools Gerardo Alvear, University of Queensland Towards integration of pyro- and hydrometallurgical unit operations for efficient recovery of battery metals from waste lithium-ion batteries Anna Klemettinen, Aalto University	Session 19 \| Physicochem. Props. KEYNOTE \| Ionic Structure Analysis of Relaxed Surface of Molten Oxide Slags for Surface Tension Modeling Masanori Suzuki, Osaka University Electrical conductivity measurement of CaO-Al2O3-CaF2 slags by van der Pauw-Ohta method Noritaka Saito, Kyushu University Quantitative studies on the microstructures of ternary CaO-Al2O3-SiO2 glasses, melts and correlation with their high-temperature viscosities Jinglin You, SKLASS, Shanghai University Effect of solid particles on the viscosity of a secondary copper smelting slag Olivier Vergote, Ghent University	Session 22 \| Vanadium and Aluminum KEYNOTE \| Phase diagram of V2O3-FetO-SiO2-CaO(15 mass%) system at 1623 K Baijun Yan, University of Scicence and Technology Beijing Phase relationship of quaternary system FeO-Al2O3-SiO2-“V2O3“ at 1873 K and its impact during melting of H-DRI for possible vanadium extraction Johan Martinsson, Swerim AB Viscosity evaluation of hot metal containing vanadium and titanium via a novel measurement technology and the thermodynamic analysis method Wenzhou Yu, Chongqing University Smelting of different hydrogen reduced bauxite residue - Calcite pellets for iron and alumina recovery Manish Kumar Kar, Norwegian University of Science and Technology (NTNU)
12:10 PM - 1:10 PM	Day 2 Lunch
1:10 PM - 2:50 PM	Session 14 \| Steelmaking Comparative study of oxide dissolution modelling in secondary steelmaking slags Nikolaus Preisser, CD-Lab for Inclusion Metallurgy in Advanced Steelmaking In-situ analysis of steelmaking slags and fluxes at elevated temperatures using a remote fiber optic Raman probe Ronald O'Malley, Missouri University of Science and Technology Crystallization control of CaO-SiO2-Al2O3-MgO system inclusion Yong Wang, Wuhan University of Science and Technology Understanding zinc-containing species in BOS dust Raymond Longbottom, University of Wollongong	Session 17 \| Non-Ferrous A critical thermodynamic & sustainability assessment of PCB recycling through secondary Cu smelting process Ashok Kamaraj, Indian Institute of Technology, Hyderabad Pyrometallurgical treatment of nickel smelting slag with biochar Desmond Attah-Kyei, Aalto University Practicalities of the use of fayalite slags for recovery of metals from urban wastes Stuart Nicol, Glencore Technology Improvement of the Copper Flash Smelting Furnace (FSF) and the Slag Cleaning Furnace (SCF) process by advice-based control of silica and coke addition Victor Montenegro, Aurubis AG	Session 20 \| Physicochem. Props Methodology development of electrical conductivity measurements for non-ferrous slags Pieter-jan Boeykens, Ghent University Machine learning - Enhanced modeling of thermal conductivity of SiO2-Al2O3-CaO slags Mengyi Zhu, Norwegian University of Science and Technology (NTNU) Effects of FeO/SiO2 ratio and optical basicity on viscosity and melt structure of FeO–SiO2–Al2O3–CaO–MgO–Cr2O3 melts Jenny Isaksson, Luleå University of Technology Determining the properties of CaO-Al2O3-SiO2 slags from molecular dynamics simulation Mengyi Zhu, Norwegian University of Science and Technology (NTNU)	Session 23 \| Impurity Distributions Distribution behaviour of B and P in Si-slag system at 1500 °C M. Akbar Rhamdhani, Swinburne University of Technology Refining of Si-Ca-Al alloys using slag treatments Elif Emil Kaya, Norwegian University of Science And Technology (NTNU) Aluminothermic production of silicon using different raw materials Katarina Jakovljevic, Norwegian University of Science And Technology (NTNU)
2:50 PM - 3:20 PM	Day 2 Afternoon Tea
3:20 PM - 5:25 PM	Session 15 \| Steelmaking Solubility of Nitrogen and Inclusion Characteristics in High Aluminium Steels Mir Ishfaq, Indian Institute of Technology, Bombay Effect of Al2O3/SiO2 ratio on structure and properties of mould flux for high-Al steel continuous casting Oleg Ostrovski, The University of New South Wales Sydney Using novel methods to characterise slag films for continuously casting challenging and innovative steel grades Zushu Li, University of Warwick Effect of liquefaction controlling components in carbon free mould powders for the continuous casting of ultra-low carbon steels Nathalie Gruber, Montanuniversität Leoben The effect of iron oxide on sulfide capacities of CaO-based molten slags Masakatsu Hasegawa, Kyoto University	Session 18 \| Non-Ferrous Coupled phase diagram experiments and thermodynamic modeling of CaO-SiO2-Ga2O3 system for the recycling of Ga Woon-oh Choe, Seoul National University Increasing cobalt recovery during oxidative blast of copper-nickel matte Roman Pakhomov, Gipronikel Institute LLC Distribution of Pb, Zn, Fe, Sn, Sb, Bi and Ni between oxide liquid and metal in the “CuO0.5”-CaO-AlO1.5 system in equilibrium with Cu Georgii Khartcyzov, PYROSEARCH, University of Queensland Equilibrium distribution of Pb between copper metal and slags Tao Kan, CSIRO	Session 21 \| CaO-Al2O3-SiO2 Slags Molecular dynamics simulation of viscosity of selected pure oxide melts Alex Kondratiev, Lomonosov Moscow State University Assessment of phase evolution in CaO–MgO–Al2O3–SiO2 system with varied Al2O3/SiO2 ratio using in-situ high-temperature Raman spectroscopy and X-ray scattering Francis Gyakwaa, University of Oulu Mixed alkali effect on structure of Al2O3-based slags Sung-Hee Hyun, POSCO Steelmaking Research Group Boron removal through multistage refining treatment using CaO-SiO₂-Al₂O₃ slag Andreas Diga Pratama Putera, Swinburne University of Technology Slag chemistry on the Moon Surya Pratap Singh, Swinburne University of Technology	Session 24 \| Ironmaking Carburization and Melting of Hot Compacted Iron in a Coke Bed Joonho Lee, Korea University Molten slag flow in an ironmaking blast furnace: A mesoscopic level investigation Xue Feng Dong, University of Wollongong Modelling of gas-slag flow behavior in the ironmaking blast furnace: A review Xue Feng Dong, University of Wollongong Reduction and meliting behaviors of carbon-iron oxide composite using iron carbides and free carbon obtained by vapor deposition Ryota Higashi, Tohoku University
6:00 PM - 10:00 PM	Aussie Conference Dinner I Tuesday 18 June 2024

	Boulevard Auditorium	Boulevard B1
8:25 AM - 9:50 AM	Day 2 Opening Session Wrap Up from Day 1 Peter Hayes, PYROSEARCH, University of Queensland PLENARY \| Challenges facing non-ferrous metal production Daniel Lindberg, Aalto University PLENARY \| Fusion of molten phase R&D into the metallurgical industry to drive circularity Stanko Nikolic, Glencore Technology
9:50 AM - 10:20 AM	Day 2 Morning Tea
10:20 AM - 12:10 PM	Session 13 \| Steelmaking KEYNOTE \| Recent advances in understanding phosphorus in oxygen steelmaking Geoffrey Brooks, Swinburne Univesity of Technology Reoxidation of Al-killed ultra-low C steel by FetO in CaO-Al2O3-MgOsat.-FetO slag representing RH slag by experiment and kinetic modeling Youn-Bae Kang, Pohang University of Science and Technology (POSTECH) Effect of MgO content on phase evolution during steelmaking slag cooling process Wenfeng Gu, Tohoku University On stability of CaS in liquid steel containing alumina or spinel inclusions Sandeep Kumar, Indian Institute of Technology, Bombay	Session 16 \| Non-Ferrous KEYNOTE \| Challenges and limitations in development of large thermodynamic database for multiple molten phases using Modified Quasichemical Formalism Denis Shishin, University of Queensland Impurity capacities of non-ferrous slags Ramana Reddy, The University of Alabama Improving industrial copper processing operations through the application of thermodynamic fundamentals and advanced predictive tools Gerardo Alvear, University of Queensland Towards integration of pyro- and hydrometallurgical unit operations for efficient recovery of battery metals from waste lithium-ion batteries Anna Klemettinen, Aalto University
12:10 PM - 1:10 PM	Day 2 Lunch
1:10 PM - 2:50 PM	Session 14 \| Steelmaking Comparative study of oxide dissolution modelling in secondary steelmaking slags Nikolaus Preisser, CD-Lab for Inclusion Metallurgy in Advanced Steelmaking In-situ analysis of steelmaking slags and fluxes at elevated temperatures using a remote fiber optic Raman probe Ronald O'Malley, Missouri University of Science and Technology Crystallization control of CaO-SiO2-Al2O3-MgO system inclusion Yong Wang, Wuhan University of Science and Technology Understanding zinc-containing species in BOS dust Raymond Longbottom, University of Wollongong	Session 17 \| Non-Ferrous A critical thermodynamic & sustainability assessment of PCB recycling through secondary Cu smelting process Ashok Kamaraj, Indian Institute of Technology, Hyderabad Pyrometallurgical treatment of nickel smelting slag with biochar Desmond Attah-Kyei, Aalto University Practicalities of the use of fayalite slags for recovery of metals from urban wastes Stuart Nicol, Glencore Technology Improvement of the Copper Flash Smelting Furnace (FSF) and the Slag Cleaning Furnace (SCF) process by advice-based control of silica and coke addition Victor Montenegro, Aurubis AG
2:50 PM - 3:20 PM	Day 2 Afternoon Tea
3:20 PM - 5:25 PM	Session 15 \| Steelmaking Solubility of Nitrogen and Inclusion Characteristics in High Aluminium Steels Mir Ishfaq, Indian Institute of Technology, Bombay Effect of Al2O3/SiO2 ratio on structure and properties of mould flux for high-Al steel continuous casting Oleg Ostrovski, The University of New South Wales Sydney Using novel methods to characterise slag films for continuously casting challenging and innovative steel grades Zushu Li, University of Warwick Effect of liquefaction controlling components in carbon free mould powders for the continuous casting of ultra-low carbon steels Nathalie Gruber, Montanuniversität Leoben The effect of iron oxide on sulfide capacities of CaO-based molten slags Masakatsu Hasegawa, Kyoto University	Session 18 \| Non-Ferrous Coupled phase diagram experiments and thermodynamic modeling of CaO-SiO2-Ga2O3 system for the recycling of Ga Woon-oh Choe, Seoul National University Increasing cobalt recovery during oxidative blast of copper-nickel matte Roman Pakhomov, Gipronikel Institute LLC Distribution of Pb, Zn, Fe, Sn, Sb, Bi and Ni between oxide liquid and metal in the “CuO0.5”-CaO-AlO1.5 system in equilibrium with Cu Georgii Khartcyzov, PYROSEARCH, University of Queensland Equilibrium distribution of Pb between copper metal and slags Tao Kan, CSIRO
6:00 PM - 10:00 PM	Aussie Conference Dinner I Tuesday 18 June 2024

	Boulevard B2	Boulevard B3
8:25 AM - 9:50 AM
9:50 AM - 10:20 AM	Day 2 Morning Tea
10:20 AM - 12:10 PM	Session 19 \| Physicochem. Props. KEYNOTE \| Ionic Structure Analysis of Relaxed Surface of Molten Oxide Slags for Surface Tension Modeling Masanori Suzuki, Osaka University Electrical conductivity measurement of CaO-Al2O3-CaF2 slags by van der Pauw-Ohta method Noritaka Saito, Kyushu University Quantitative studies on the microstructures of ternary CaO-Al2O3-SiO2 glasses, melts and correlation with their high-temperature viscosities Jinglin You, SKLASS, Shanghai University Effect of solid particles on the viscosity of a secondary copper smelting slag Olivier Vergote, Ghent University	Session 22 \| Vanadium and Aluminum KEYNOTE \| Phase diagram of V2O3-FetO-SiO2-CaO(15 mass%) system at 1623 K Baijun Yan, University of Scicence and Technology Beijing Phase relationship of quaternary system FeO-Al2O3-SiO2-“V2O3“ at 1873 K and its impact during melting of H-DRI for possible vanadium extraction Johan Martinsson, Swerim AB Viscosity evaluation of hot metal containing vanadium and titanium via a novel measurement technology and the thermodynamic analysis method Wenzhou Yu, Chongqing University Smelting of different hydrogen reduced bauxite residue - Calcite pellets for iron and alumina recovery Manish Kumar Kar, Norwegian University of Science and Technology (NTNU)
12:10 PM - 1:10 PM	Day 2 Lunch
1:10 PM - 2:50 PM	Session 20 \| Physicochem. Props Methodology development of electrical conductivity measurements for non-ferrous slags Pieter-jan Boeykens, Ghent University Machine learning - Enhanced modeling of thermal conductivity of SiO2-Al2O3-CaO slags Mengyi Zhu, Norwegian University of Science and Technology (NTNU) Effects of FeO/SiO2 ratio and optical basicity on viscosity and melt structure of FeO–SiO2–Al2O3–CaO–MgO–Cr2O3 melts Jenny Isaksson, Luleå University of Technology Determining the properties of CaO-Al2O3-SiO2 slags from molecular dynamics simulation Mengyi Zhu, Norwegian University of Science and Technology (NTNU)	Session 23 \| Impurity Distributions Distribution behaviour of B and P in Si-slag system at 1500 °C M. Akbar Rhamdhani, Swinburne University of Technology Refining of Si-Ca-Al alloys using slag treatments Elif Emil Kaya, Norwegian University of Science And Technology (NTNU) Aluminothermic production of silicon using different raw materials Katarina Jakovljevic, Norwegian University of Science And Technology (NTNU)
2:50 PM - 3:20 PM	Day 2 Afternoon Tea
3:20 PM - 5:25 PM	Session 21 \| CaO-Al2O3-SiO2 Slags Molecular dynamics simulation of viscosity of selected pure oxide melts Alex Kondratiev, Lomonosov Moscow State University Assessment of phase evolution in CaO–MgO–Al2O3–SiO2 system with varied Al2O3/SiO2 ratio using in-situ high-temperature Raman spectroscopy and X-ray scattering Francis Gyakwaa, University of Oulu Mixed alkali effect on structure of Al2O3-based slags Sung-Hee Hyun, POSCO Steelmaking Research Group Boron removal through multistage refining treatment using CaO-SiO₂-Al₂O₃ slag Andreas Diga Pratama Putera, Swinburne University of Technology Slag chemistry on the Moon Surya Pratap Singh, Swinburne University of Technology	Session 24 \| Ironmaking Carburization and Melting of Hot Compacted Iron in a Coke Bed Joonho Lee, Korea University Molten slag flow in an ironmaking blast furnace: A mesoscopic level investigation Xue Feng Dong, University of Wollongong Modelling of gas-slag flow behavior in the ironmaking blast furnace: A review Xue Feng Dong, University of Wollongong Reduction and meliting behaviors of carbon-iron oxide composite using iron carbides and free carbon obtained by vapor deposition Ryota Higashi, Tohoku University
6:00 PM - 10:00 PM	Aussie Conference Dinner I Tuesday 18 June 2024

	Boulevard Auditorium
8:25 AM - 9:50 AM	Day 2 Opening Session Wrap Up from Day 1 Peter Hayes, PYROSEARCH, University of Queensland PLENARY \| Challenges facing non-ferrous metal production Daniel Lindberg, Aalto University PLENARY \| Fusion of molten phase R&D into the metallurgical industry to drive circularity Stanko Nikolic, Glencore Technology
9:50 AM - 10:20 AM	Day 2 Morning Tea
10:20 AM - 12:10 PM	Session 13 \| Steelmaking KEYNOTE \| Recent advances in understanding phosphorus in oxygen steelmaking Geoffrey Brooks, Swinburne Univesity of Technology Reoxidation of Al-killed ultra-low C steel by FetO in CaO-Al2O3-MgOsat.-FetO slag representing RH slag by experiment and kinetic modeling Youn-Bae Kang, Pohang University of Science and Technology (POSTECH) Effect of MgO content on phase evolution during steelmaking slag cooling process Wenfeng Gu, Tohoku University On stability of CaS in liquid steel containing alumina or spinel inclusions Sandeep Kumar, Indian Institute of Technology, Bombay
12:10 PM - 1:10 PM	Day 2 Lunch
1:10 PM - 2:50 PM	Session 14 \| Steelmaking Comparative study of oxide dissolution modelling in secondary steelmaking slags Nikolaus Preisser, CD-Lab for Inclusion Metallurgy in Advanced Steelmaking In-situ analysis of steelmaking slags and fluxes at elevated temperatures using a remote fiber optic Raman probe Ronald O'Malley, Missouri University of Science and Technology Crystallization control of CaO-SiO2-Al2O3-MgO system inclusion Yong Wang, Wuhan University of Science and Technology Understanding zinc-containing species in BOS dust Raymond Longbottom, University of Wollongong
2:50 PM - 3:20 PM	Day 2 Afternoon Tea
3:20 PM - 5:25 PM	Session 15 \| Steelmaking Solubility of Nitrogen and Inclusion Characteristics in High Aluminium Steels Mir Ishfaq, Indian Institute of Technology, Bombay Effect of Al2O3/SiO2 ratio on structure and properties of mould flux for high-Al steel continuous casting Oleg Ostrovski, The University of New South Wales Sydney Using novel methods to characterise slag films for continuously casting challenging and innovative steel grades Zushu Li, University of Warwick Effect of liquefaction controlling components in carbon free mould powders for the continuous casting of ultra-low carbon steels Nathalie Gruber, Montanuniversität Leoben The effect of iron oxide on sulfide capacities of CaO-based molten slags Masakatsu Hasegawa, Kyoto University
6:00 PM - 10:00 PM	Aussie Conference Dinner I Tuesday 18 June 2024

	Boulevard B1
8:25 AM - 9:50 AM
9:50 AM - 10:20 AM	Day 2 Morning Tea
10:20 AM - 12:10 PM	Session 16 \| Non-Ferrous KEYNOTE \| Challenges and limitations in development of large thermodynamic database for multiple molten phases using Modified Quasichemical Formalism Denis Shishin, University of Queensland Impurity capacities of non-ferrous slags Ramana Reddy, The University of Alabama Improving industrial copper processing operations through the application of thermodynamic fundamentals and advanced predictive tools Gerardo Alvear, University of Queensland Towards integration of pyro- and hydrometallurgical unit operations for efficient recovery of battery metals from waste lithium-ion batteries Anna Klemettinen, Aalto University
12:10 PM - 1:10 PM	Day 2 Lunch
1:10 PM - 2:50 PM	Session 17 \| Non-Ferrous A critical thermodynamic & sustainability assessment of PCB recycling through secondary Cu smelting process Ashok Kamaraj, Indian Institute of Technology, Hyderabad Pyrometallurgical treatment of nickel smelting slag with biochar Desmond Attah-Kyei, Aalto University Practicalities of the use of fayalite slags for recovery of metals from urban wastes Stuart Nicol, Glencore Technology Improvement of the Copper Flash Smelting Furnace (FSF) and the Slag Cleaning Furnace (SCF) process by advice-based control of silica and coke addition Victor Montenegro, Aurubis AG
2:50 PM - 3:20 PM	Day 2 Afternoon Tea
3:20 PM - 5:25 PM	Session 18 \| Non-Ferrous Coupled phase diagram experiments and thermodynamic modeling of CaO-SiO2-Ga2O3 system for the recycling of Ga Woon-oh Choe, Seoul National University Increasing cobalt recovery during oxidative blast of copper-nickel matte Roman Pakhomov, Gipronikel Institute LLC Distribution of Pb, Zn, Fe, Sn, Sb, Bi and Ni between oxide liquid and metal in the “CuO0.5”-CaO-AlO1.5 system in equilibrium with Cu Georgii Khartcyzov, PYROSEARCH, University of Queensland Equilibrium distribution of Pb between copper metal and slags Tao Kan, CSIRO
6:00 PM - 10:00 PM	Aussie Conference Dinner I Tuesday 18 June 2024

	Boulevard B2
8:25 AM - 9:50 AM
9:50 AM - 10:20 AM	Day 2 Morning Tea
10:20 AM - 12:10 PM	Session 19 \| Physicochem. Props. KEYNOTE \| Ionic Structure Analysis of Relaxed Surface of Molten Oxide Slags for Surface Tension Modeling Masanori Suzuki, Osaka University Electrical conductivity measurement of CaO-Al2O3-CaF2 slags by van der Pauw-Ohta method Noritaka Saito, Kyushu University Quantitative studies on the microstructures of ternary CaO-Al2O3-SiO2 glasses, melts and correlation with their high-temperature viscosities Jinglin You, SKLASS, Shanghai University Effect of solid particles on the viscosity of a secondary copper smelting slag Olivier Vergote, Ghent University
12:10 PM - 1:10 PM	Day 2 Lunch
1:10 PM - 2:50 PM	Session 20 \| Physicochem. Props Methodology development of electrical conductivity measurements for non-ferrous slags Pieter-jan Boeykens, Ghent University Machine learning - Enhanced modeling of thermal conductivity of SiO2-Al2O3-CaO slags Mengyi Zhu, Norwegian University of Science and Technology (NTNU) Effects of FeO/SiO2 ratio and optical basicity on viscosity and melt structure of FeO–SiO2–Al2O3–CaO–MgO–Cr2O3 melts Jenny Isaksson, Luleå University of Technology Determining the properties of CaO-Al2O3-SiO2 slags from molecular dynamics simulation Mengyi Zhu, Norwegian University of Science and Technology (NTNU)
2:50 PM - 3:20 PM	Day 2 Afternoon Tea
3:20 PM - 5:25 PM	Session 21 \| CaO-Al2O3-SiO2 Slags Molecular dynamics simulation of viscosity of selected pure oxide melts Alex Kondratiev, Lomonosov Moscow State University Assessment of phase evolution in CaO–MgO–Al2O3–SiO2 system with varied Al2O3/SiO2 ratio using in-situ high-temperature Raman spectroscopy and X-ray scattering Francis Gyakwaa, University of Oulu Mixed alkali effect on structure of Al2O3-based slags Sung-Hee Hyun, POSCO Steelmaking Research Group Boron removal through multistage refining treatment using CaO-SiO₂-Al₂O₃ slag Andreas Diga Pratama Putera, Swinburne University of Technology Slag chemistry on the Moon Surya Pratap Singh, Swinburne University of Technology
6:00 PM - 10:00 PM	Aussie Conference Dinner I Tuesday 18 June 2024

	Boulevard B3
8:25 AM - 9:50 AM
9:50 AM - 10:20 AM	Day 2 Morning Tea
10:20 AM - 12:10 PM	Session 22 \| Vanadium and Aluminum KEYNOTE \| Phase diagram of V2O3-FetO-SiO2-CaO(15 mass%) system at 1623 K Baijun Yan, University of Scicence and Technology Beijing Phase relationship of quaternary system FeO-Al2O3-SiO2-“V2O3“ at 1873 K and its impact during melting of H-DRI for possible vanadium extraction Johan Martinsson, Swerim AB Viscosity evaluation of hot metal containing vanadium and titanium via a novel measurement technology and the thermodynamic analysis method Wenzhou Yu, Chongqing University Smelting of different hydrogen reduced bauxite residue - Calcite pellets for iron and alumina recovery Manish Kumar Kar, Norwegian University of Science and Technology (NTNU)
12:10 PM - 1:10 PM	Day 2 Lunch
1:10 PM - 2:50 PM	Session 23 \| Impurity Distributions Distribution behaviour of B and P in Si-slag system at 1500 °C M. Akbar Rhamdhani, Swinburne University of Technology Refining of Si-Ca-Al alloys using slag treatments Elif Emil Kaya, Norwegian University of Science And Technology (NTNU) Aluminothermic production of silicon using different raw materials Katarina Jakovljevic, Norwegian University of Science And Technology (NTNU)
2:50 PM - 3:20 PM	Day 2 Afternoon Tea
3:20 PM - 5:25 PM	Session 24 \| Ironmaking Carburization and Melting of Hot Compacted Iron in a Coke Bed Joonho Lee, Korea University Molten slag flow in an ironmaking blast furnace: A mesoscopic level investigation Xue Feng Dong, University of Wollongong Modelling of gas-slag flow behavior in the ironmaking blast furnace: A review Xue Feng Dong, University of Wollongong Reduction and meliting behaviors of carbon-iron oxide composite using iron carbides and free carbon obtained by vapor deposition Ryota Higashi, Tohoku University
6:00 PM - 10:00 PM	Aussie Conference Dinner I Tuesday 18 June 2024

Wednesday, June 19, 2024

	Boulevard Auditorium	Boulevard B1	Boulevard B2	Boulevard B3
8:30 AM - 9:15 AM	Day 3 Opening Session Wrap Up from Day 2 Peter Hayes, PYROSEARCH, University of Queensland PLENARY \| University research on molten slags, matte, speiss and metal systems for high temperature processing – challenges, opportunities and solutions Evgueni Jak, PYROSEARCH, University of Queensland
9:15 AM - 9:25 AM	Move to Next Session
9:25 AM - 10:50 AM	Session 25 \| Electroslag KEYNOTE \| State of the art of the electroslag refining and challenges of ingot cleanness control Lev Medovar, E.O. Paton Welding Institute (PWI) & China First Heavy Industries (CFHI) Effect of SiO2 on crystallization and structure of CaF2-CaO-Al2O3 slag used in electroslag remelting Midhun P M, Indian Institute of Technology, Bombay, India Genetic design of personalized slag for manufacturing die steel via electroslag remelting method and an industrial application case Zhouhua Jiang, Northeastern University	Session 28 \| Process Simulation KEYNOTE \| Process modeling and high throughput thermochemical calculations using ChemApp for Python Stephan Petersen, GTT-Technologies Combining the power of computational thermochemistry with the convenience of Python within the digital platforms of SMS Group Sabrine Khadhraoui, SMS Group GmbH Understanding the side-blown furnace slag system at Glencore Nordenham’s lead plant: From theory to industrial application Alejandro Abadias Llamas, Glencore Nordenham	Session 31 \| Steelmaking KEYNOTE \| Sulfur distribution ratio in iron and steelmaking slags Ramana Reddy, The University of Alabama Effect of solid-solved FeO and MnO on hydration of free MgO in steelmaking slag Ryo Inoue, Tohoku University A phenomena-based model to investigate the possibility of scrap melting in an Open Slag Bath Furnace (OSBF) for green ironmaking Ali Emami, Tata Steel Technology B.v.	Session 34 \| Si-alloys KEYNOTE \| Efficient material descriptions for modelling high-temperature processes Johan Zietsman, Ex Mente Technologies Thermal phosphorus – It’s a hot commodity with a hot process Ewan Wingate, Bechtel Mining & Metals Manufacturing of FeSiB high-temperature phase change material by silicothermic reduction Jianmeng Jiao, Norwegian University of Science And Technology (NTNU)
10:50 AM - 11:20 AM	Day 3 Morning Tea
11:20 AM - 12:35 PM	Session 26 \| Steelmaking An investigation of potential wear occurring on refractory lining and coating formation - A remedy of wear in a basic oxygen steelmaking furnace using CFD modelling Subhasish Mitra, The University of Newcastle Activities of components in Ca2SiO4-Ca3P2O8 solid solution at 1573 K Keijiro Saito, Kyoto University A machine learning model to predict non-metallic inclusion dissolution in the metallurgical slag Wangzhong Mu, KTH Royal Institute of Technology	Session 29 \| Refractory Corrosion behavior of ferrite and aluminate refractories in cryolite-aluminium melts M. Akbar Rhamdhani, Swinburne University of Technology The interaction between slag and MgO refractory at conditions relevant to nickel laterite ore smelting Taufiq Hidayat, Institut Teknologi Bandung Radical involved reaction and weak magnetic effect between alumina refractory and high alumina slags Shenghao Li, The State Key Laboratory of Refractories and Metallurgy	Session 32 \| DRI and EAF Molybdenum disilicide production using a silicon-containing molten bath via the hot dipping method Jonah Gamutan, Curtin University A study of heat and material balances in direct reduction plant with various conditions MinJu Sun, Hyundai Steel Slag volume effects on DRI-based electric furnace steelmaking Chris Pistorius, Carnegie Mellon University	Session 35 \| Mn and Ti Production Dissolution of quartz in Mn-slags during production of SiMn alloy Vincent Canaguier, SINTEF Flow investigation of multiphase manganese slags Vishal Rimal, Norwegian University of Science and Technology (NTNU)
12:35 PM - 1:35 PM	Day 3 Lunch
1:35 PM - 3:15 PM	Session 27 \| Steelmaking Effect of CeO2 content on the fluidity of continuous casting mold slag Zhang Chen, University of Science and Technology Beijing Effect of C/A ratio on the crystallization behavior and structure of calcium-aluminate based alternative mould fluxes for casting medium and high Mn/Al steels Rahul Sarkar, Indian Institute of Technology, Kanpur A fundamental investigation on welding flux tunability geared towards high heat input submerged arc welding for shipbuilding applications Xiao Yang, Westlake University Effect of mill-scale and calcined dolomite on high Al2O3 sinter and its reduction behavior Seong-jin Kim, Pohang University of Science and Technology (POSTECH)	Session 30 \| Phase Analysis KEYNOTE \| Chemical- and micro-analytical techniques for molten slags, mattes, speisses and alloys Jiang (Jeff) Chen, University of Queensland Thermodynamic modeling of the Fe-Al-Ti-O system and evolution of Al-Ti complex inclusions during Ti-added ultra low carbon steel production Young-Joon Park, Pohang University of Science and Technology (POSTECH) Visualisation of calculated thermodynamic properties by integration of FactSage with SEM-EDS element maps Nathan Barrett, Centre for Ironmaking Materials Research	Session 33 \| Ironmaking Fluxing options and slag operating window for Metso’s DRI smelting furnace Joseph Hamuyuni, Mesto Effect of alumina on microstructures of iron ore sinters from the perspective of the phase equilibria of the CaO-SiO2-Fe2O3-Al2O3 system Miyuki Hayashi, Tokyo Institute of Technology In-situ Observation of Phase Transition of Silico-Ferrite of Calcium and Aluminum Haeun Kim, Korea University	Session 36 \| CO2 Reduction Measuring circular economy through Life Cycle Assessment: challenges and recommendations based on a study on recycling of Al dross, bottom ash and shavings Elisa Pastor-Vallés, Norwegian University of Science and Technology (NTNU) Lessons learned from attempts at minimizing CO2 emissions in process metallurgy: Pyrolyzed secondary raw materials, bio-coke, and hydrogen as alternative reducing agents Fabian Diaz, RWTH Aachen University The possibility of using an autogenous hydrogen-DRI slag as a raw material for vanadium extraction Johan Martinsson, Swerim AB
3:15 PM - 4:00 PM	Closing Session Glencore Technology Presentation \| Poster Winners Peter Hayes, PYROSEARCH, University of Queensland Thanks \| Molten 2028 Peter Hayes, PYROSEARCH, University of Queensland

	Boulevard Auditorium	Boulevard B1
8:30 AM - 9:15 AM	Day 3 Opening Session Wrap Up from Day 2 Peter Hayes, PYROSEARCH, University of Queensland PLENARY \| University research on molten slags, matte, speiss and metal systems for high temperature processing – challenges, opportunities and solutions Evgueni Jak, PYROSEARCH, University of Queensland
9:15 AM - 9:25 AM	Move to Next Session
9:25 AM - 10:50 AM	Session 25 \| Electroslag KEYNOTE \| State of the art of the electroslag refining and challenges of ingot cleanness control Lev Medovar, E.O. Paton Welding Institute (PWI) & China First Heavy Industries (CFHI) Effect of SiO2 on crystallization and structure of CaF2-CaO-Al2O3 slag used in electroslag remelting Midhun P M, Indian Institute of Technology, Bombay, India Genetic design of personalized slag for manufacturing die steel via electroslag remelting method and an industrial application case Zhouhua Jiang, Northeastern University	Session 28 \| Process Simulation KEYNOTE \| Process modeling and high throughput thermochemical calculations using ChemApp for Python Stephan Petersen, GTT-Technologies Combining the power of computational thermochemistry with the convenience of Python within the digital platforms of SMS Group Sabrine Khadhraoui, SMS Group GmbH Understanding the side-blown furnace slag system at Glencore Nordenham’s lead plant: From theory to industrial application Alejandro Abadias Llamas, Glencore Nordenham
10:50 AM - 11:20 AM	Day 3 Morning Tea
11:20 AM - 12:35 PM	Session 26 \| Steelmaking An investigation of potential wear occurring on refractory lining and coating formation - A remedy of wear in a basic oxygen steelmaking furnace using CFD modelling Subhasish Mitra, The University of Newcastle Activities of components in Ca2SiO4-Ca3P2O8 solid solution at 1573 K Keijiro Saito, Kyoto University A machine learning model to predict non-metallic inclusion dissolution in the metallurgical slag Wangzhong Mu, KTH Royal Institute of Technology	Session 29 \| Refractory Corrosion behavior of ferrite and aluminate refractories in cryolite-aluminium melts M. Akbar Rhamdhani, Swinburne University of Technology The interaction between slag and MgO refractory at conditions relevant to nickel laterite ore smelting Taufiq Hidayat, Institut Teknologi Bandung Radical involved reaction and weak magnetic effect between alumina refractory and high alumina slags Shenghao Li, The State Key Laboratory of Refractories and Metallurgy
12:35 PM - 1:35 PM	Day 3 Lunch
1:35 PM - 3:15 PM	Session 27 \| Steelmaking Effect of CeO2 content on the fluidity of continuous casting mold slag Zhang Chen, University of Science and Technology Beijing Effect of C/A ratio on the crystallization behavior and structure of calcium-aluminate based alternative mould fluxes for casting medium and high Mn/Al steels Rahul Sarkar, Indian Institute of Technology, Kanpur A fundamental investigation on welding flux tunability geared towards high heat input submerged arc welding for shipbuilding applications Xiao Yang, Westlake University Effect of mill-scale and calcined dolomite on high Al2O3 sinter and its reduction behavior Seong-jin Kim, Pohang University of Science and Technology (POSTECH)	Session 30 \| Phase Analysis KEYNOTE \| Chemical- and micro-analytical techniques for molten slags, mattes, speisses and alloys Jiang (Jeff) Chen, University of Queensland Thermodynamic modeling of the Fe-Al-Ti-O system and evolution of Al-Ti complex inclusions during Ti-added ultra low carbon steel production Young-Joon Park, Pohang University of Science and Technology (POSTECH) Visualisation of calculated thermodynamic properties by integration of FactSage with SEM-EDS element maps Nathan Barrett, Centre for Ironmaking Materials Research
3:15 PM - 4:00 PM	Closing Session Glencore Technology Presentation \| Poster Winners Peter Hayes, PYROSEARCH, University of Queensland Thanks \| Molten 2028 Peter Hayes, PYROSEARCH, University of Queensland

	Boulevard B2	Boulevard B3
8:30 AM - 9:15 AM
9:15 AM - 9:25 AM	Move to Next Session
9:25 AM - 10:50 AM	Session 31 \| Steelmaking KEYNOTE \| Sulfur distribution ratio in iron and steelmaking slags Ramana Reddy, The University of Alabama Effect of solid-solved FeO and MnO on hydration of free MgO in steelmaking slag Ryo Inoue, Tohoku University A phenomena-based model to investigate the possibility of scrap melting in an Open Slag Bath Furnace (OSBF) for green ironmaking Ali Emami, Tata Steel Technology B.v.	Session 34 \| Si-alloys KEYNOTE \| Efficient material descriptions for modelling high-temperature processes Johan Zietsman, Ex Mente Technologies Thermal phosphorus – It’s a hot commodity with a hot process Ewan Wingate, Bechtel Mining & Metals Manufacturing of FeSiB high-temperature phase change material by silicothermic reduction Jianmeng Jiao, Norwegian University of Science And Technology (NTNU)
10:50 AM - 11:20 AM	Day 3 Morning Tea
11:20 AM - 12:35 PM	Session 32 \| DRI and EAF Molybdenum disilicide production using a silicon-containing molten bath via the hot dipping method Jonah Gamutan, Curtin University A study of heat and material balances in direct reduction plant with various conditions MinJu Sun, Hyundai Steel Slag volume effects on DRI-based electric furnace steelmaking Chris Pistorius, Carnegie Mellon University	Session 35 \| Mn and Ti Production Dissolution of quartz in Mn-slags during production of SiMn alloy Vincent Canaguier, SINTEF Flow investigation of multiphase manganese slags Vishal Rimal, Norwegian University of Science and Technology (NTNU)
12:35 PM - 1:35 PM	Day 3 Lunch
1:35 PM - 3:15 PM	Session 33 \| Ironmaking Fluxing options and slag operating window for Metso’s DRI smelting furnace Joseph Hamuyuni, Mesto Effect of alumina on microstructures of iron ore sinters from the perspective of the phase equilibria of the CaO-SiO2-Fe2O3-Al2O3 system Miyuki Hayashi, Tokyo Institute of Technology In-situ Observation of Phase Transition of Silico-Ferrite of Calcium and Aluminum Haeun Kim, Korea University	Session 36 \| CO2 Reduction Measuring circular economy through Life Cycle Assessment: challenges and recommendations based on a study on recycling of Al dross, bottom ash and shavings Elisa Pastor-Vallés, Norwegian University of Science and Technology (NTNU) Lessons learned from attempts at minimizing CO2 emissions in process metallurgy: Pyrolyzed secondary raw materials, bio-coke, and hydrogen as alternative reducing agents Fabian Diaz, RWTH Aachen University The possibility of using an autogenous hydrogen-DRI slag as a raw material for vanadium extraction Johan Martinsson, Swerim AB
3:15 PM - 4:00 PM

	Boulevard Auditorium
8:30 AM - 9:15 AM	Day 3 Opening Session Wrap Up from Day 2 Peter Hayes, PYROSEARCH, University of Queensland PLENARY \| University research on molten slags, matte, speiss and metal systems for high temperature processing – challenges, opportunities and solutions Evgueni Jak, PYROSEARCH, University of Queensland
9:15 AM - 9:25 AM	Move to Next Session
9:25 AM - 10:50 AM	Session 25 \| Electroslag KEYNOTE \| State of the art of the electroslag refining and challenges of ingot cleanness control Lev Medovar, E.O. Paton Welding Institute (PWI) & China First Heavy Industries (CFHI) Effect of SiO2 on crystallization and structure of CaF2-CaO-Al2O3 slag used in electroslag remelting Midhun P M, Indian Institute of Technology, Bombay, India Genetic design of personalized slag for manufacturing die steel via electroslag remelting method and an industrial application case Zhouhua Jiang, Northeastern University
10:50 AM - 11:20 AM	Day 3 Morning Tea
11:20 AM - 12:35 PM	Session 26 \| Steelmaking An investigation of potential wear occurring on refractory lining and coating formation - A remedy of wear in a basic oxygen steelmaking furnace using CFD modelling Subhasish Mitra, The University of Newcastle Activities of components in Ca2SiO4-Ca3P2O8 solid solution at 1573 K Keijiro Saito, Kyoto University A machine learning model to predict non-metallic inclusion dissolution in the metallurgical slag Wangzhong Mu, KTH Royal Institute of Technology
12:35 PM - 1:35 PM	Day 3 Lunch
1:35 PM - 3:15 PM	Session 27 \| Steelmaking Effect of CeO2 content on the fluidity of continuous casting mold slag Zhang Chen, University of Science and Technology Beijing Effect of C/A ratio on the crystallization behavior and structure of calcium-aluminate based alternative mould fluxes for casting medium and high Mn/Al steels Rahul Sarkar, Indian Institute of Technology, Kanpur A fundamental investigation on welding flux tunability geared towards high heat input submerged arc welding for shipbuilding applications Xiao Yang, Westlake University Effect of mill-scale and calcined dolomite on high Al2O3 sinter and its reduction behavior Seong-jin Kim, Pohang University of Science and Technology (POSTECH)
3:15 PM - 4:00 PM	Closing Session Glencore Technology Presentation \| Poster Winners Peter Hayes, PYROSEARCH, University of Queensland Thanks \| Molten 2028 Peter Hayes, PYROSEARCH, University of Queensland

	Boulevard B1
8:30 AM - 9:15 AM
9:15 AM - 9:25 AM	Move to Next Session
9:25 AM - 10:50 AM	Session 28 \| Process Simulation KEYNOTE \| Process modeling and high throughput thermochemical calculations using ChemApp for Python Stephan Petersen, GTT-Technologies Combining the power of computational thermochemistry with the convenience of Python within the digital platforms of SMS Group Sabrine Khadhraoui, SMS Group GmbH Understanding the side-blown furnace slag system at Glencore Nordenham’s lead plant: From theory to industrial application Alejandro Abadias Llamas, Glencore Nordenham
10:50 AM - 11:20 AM	Day 3 Morning Tea
11:20 AM - 12:35 PM	Session 29 \| Refractory Corrosion behavior of ferrite and aluminate refractories in cryolite-aluminium melts M. Akbar Rhamdhani, Swinburne University of Technology The interaction between slag and MgO refractory at conditions relevant to nickel laterite ore smelting Taufiq Hidayat, Institut Teknologi Bandung Radical involved reaction and weak magnetic effect between alumina refractory and high alumina slags Shenghao Li, The State Key Laboratory of Refractories and Metallurgy
12:35 PM - 1:35 PM	Day 3 Lunch
1:35 PM - 3:15 PM	Session 30 \| Phase Analysis KEYNOTE \| Chemical- and micro-analytical techniques for molten slags, mattes, speisses and alloys Jiang (Jeff) Chen, University of Queensland Thermodynamic modeling of the Fe-Al-Ti-O system and evolution of Al-Ti complex inclusions during Ti-added ultra low carbon steel production Young-Joon Park, Pohang University of Science and Technology (POSTECH) Visualisation of calculated thermodynamic properties by integration of FactSage with SEM-EDS element maps Nathan Barrett, Centre for Ironmaking Materials Research
3:15 PM - 4:00 PM

	Boulevard B2
8:30 AM - 9:15 AM
9:15 AM - 9:25 AM	Move to Next Session
9:25 AM - 10:50 AM	Session 31 \| Steelmaking KEYNOTE \| Sulfur distribution ratio in iron and steelmaking slags Ramana Reddy, The University of Alabama Effect of solid-solved FeO and MnO on hydration of free MgO in steelmaking slag Ryo Inoue, Tohoku University A phenomena-based model to investigate the possibility of scrap melting in an Open Slag Bath Furnace (OSBF) for green ironmaking Ali Emami, Tata Steel Technology B.v.
10:50 AM - 11:20 AM	Day 3 Morning Tea
11:20 AM - 12:35 PM	Session 32 \| DRI and EAF Molybdenum disilicide production using a silicon-containing molten bath via the hot dipping method Jonah Gamutan, Curtin University A study of heat and material balances in direct reduction plant with various conditions MinJu Sun, Hyundai Steel Slag volume effects on DRI-based electric furnace steelmaking Chris Pistorius, Carnegie Mellon University
12:35 PM - 1:35 PM	Day 3 Lunch
1:35 PM - 3:15 PM	Session 33 \| Ironmaking Fluxing options and slag operating window for Metso’s DRI smelting furnace Joseph Hamuyuni, Mesto Effect of alumina on microstructures of iron ore sinters from the perspective of the phase equilibria of the CaO-SiO2-Fe2O3-Al2O3 system Miyuki Hayashi, Tokyo Institute of Technology In-situ Observation of Phase Transition of Silico-Ferrite of Calcium and Aluminum Haeun Kim, Korea University
3:15 PM - 4:00 PM

	Boulevard B3
8:30 AM - 9:15 AM
9:15 AM - 9:25 AM	Move to Next Session
9:25 AM - 10:50 AM	Session 34 \| Si-alloys KEYNOTE \| Efficient material descriptions for modelling high-temperature processes Johan Zietsman, Ex Mente Technologies Thermal phosphorus – It’s a hot commodity with a hot process Ewan Wingate, Bechtel Mining & Metals Manufacturing of FeSiB high-temperature phase change material by silicothermic reduction Jianmeng Jiao, Norwegian University of Science And Technology (NTNU)
10:50 AM - 11:20 AM	Day 3 Morning Tea
11:20 AM - 12:35 PM	Session 35 \| Mn and Ti Production Dissolution of quartz in Mn-slags during production of SiMn alloy Vincent Canaguier, SINTEF Flow investigation of multiphase manganese slags Vishal Rimal, Norwegian University of Science and Technology (NTNU)
12:35 PM - 1:35 PM	Day 3 Lunch
1:35 PM - 3:15 PM	Session 36 \| CO2 Reduction Measuring circular economy through Life Cycle Assessment: challenges and recommendations based on a study on recycling of Al dross, bottom ash and shavings Elisa Pastor-Vallés, Norwegian University of Science and Technology (NTNU) Lessons learned from attempts at minimizing CO2 emissions in process metallurgy: Pyrolyzed secondary raw materials, bio-coke, and hydrogen as alternative reducing agents Fabian Diaz, RWTH Aachen University The possibility of using an autogenous hydrogen-DRI slag as a raw material for vanadium extraction Johan Martinsson, Swerim AB
3:15 PM - 4:00 PM

You need to enable JavaScript to access this site.

Follow these instructions on how to enable JavaScript.

Internet Explorer

Select Tools from the top menu
Choose Internet Options
Click on the Security tab
Click on Custom Level
Scroll down until you see the section labelled Scripting
Under Active Scripting, select Enable and click OK

Google Chrome

Select the menu icon on the browser toolbar
Select Settings
Click the Show advanced settings... link then Content Settings in the Privacy section
Select Allow all sites to run JavaScript (recommended) and click Done

Safari (Mac)

Select Safari from the top menu
Choose Preferences
Choose Security
Select the checkbox next to Enable JavaScript