Program | Iron Ore 2023

The conference program is subject to change at any time, at the discretion of the organising committee.

All times are listed below in Australian Western Standard Time (AWST) as the conference is held in Perth, Australia.

Monday, September 18, 2023

	Stream A	Stream B
7:30 AM - 8:30 AM	Day 1 \| Registration Opens & Arrival Networking
8:30 AM - 9:45 AM	Session 1 I Opening Plenary Welcome to Country Robyn Collard, Whadjuk Boodja Welcome from the Conference Chair Ralph Holmes, CSIRO Welcome from AusIMM Stephen Durkin, AusIMM Ministerial Address and Official Conference Opening Session Presenter, Keynote \| Race to Real Zero Christiaan Heyning, Fortescue Session 1 \| Q&A with Session Chair Session Presenter,
9:45 AM - 10:15 AM	Day 1 \| Morning Tea
10:15 AM - 12:15 PM	Session 2a \| Greener downstream processing Sponsored By Assessment and operation optimization of iron ore products under industry-scale blast furnace conditions towards decarbonization using state-of-the-edge CFD models Yansong Shen, UNSW Evaluation of the Environmental Benefits of Using a Conveyor Belt Mining System in an Open Pit Mine Douglas Oliveira, Samarco How are Indian mills changing feed charge mix to address the carbon emission norms? Dhruv Goel, SteelMint Session 2a \| Q&A with Session Chair Session Presenter, Making a positive change: Evolving the modern Integrated Remote Operations Centre to optimize and support carbon-neutral value chains Jarrod Bassan, HATCH Immortality Design of the allflux Upstream Classifier in the Iron Ore Industry - for a safe workplace and an economic, sustainable, highly efficient separation technology Marco Steinberg, Hazemag allmineral Australia Pty. Ltd. Case Studies Illustrating the role of F-Series Reconciliations in Production Forecast Improvement Initiatives Steve Loach, BHP-WAIO Session 2a \| Q&A with Session Chair Session Presenter,	Session 2b \| Exploration and geology Sponsored By An Iron Ore Detective Story in Papua New Guinea Erick Ramanaidou, CSIRO Mineral Resources Kisoro-Kabale Iron Ore Project in South Western Uganda: Unlocking a new High grade Iron Ore region for Exploration and Development Lee White, Kalem Group Pty Ltd Characterisation of the Iron Bridge magnetite project Erick Ramanaidou, CSIRO Mineral Resources Session 2b \| Q&A with Session Chair Session Presenter, JORC 202X: An update on the progress and next steps for the JORC Code Review Leigh Slomp, AusIMM Geoscience 2033: A vision for mineral exploration in 10 years Lance Karlson, BHP New occurrence of banded iron formations in the Minvoul region, Ntem complex (Northern Gabon) Mario Iglesias-Martinez, CSIRO Session 2b \| Q&A with Session Chair Session Presenter,
12:15 PM - 1:15 PM	Day 1 \| Lunch
1:15 PM - 3:15 PM	Session 3 \| Greener downstream processing continued Keynote \| Fundamental Research and Partnerships - Unlocking the use of Pilbara Iron Ore in Low Carbon Ironmaking Darren Matthews, Rio Tinto Session 3 \| Q&A with Session Chair Session Presenter, The Boycott Effect - A Pathway to Achieving High Grade Iron Ore Kevin Galvin, ARC Centre of Excellence for Enabling Eco-Efficient Beneficiation of Minerals A guide to ground disturbance permitting and managing ESG risk Brian Spence, K2fly Session 3 \| Q&A with Session Chair Session Presenter, Keynote \| Western Australia’s iron ore sector Hon Bill Johnston MLA, Minister for Mines and Petroleum; Energy; Corrective Services; Industrial Relations Session 3 \| Q&A with Session Chair Session Presenter,
3:15 PM - 3:45 PM	Day 1 \| Afternoon Tea
3:45 PM - 5:00 PM	Session 4a I Health, safety, environment and community Supply Chain Approach to Iron Ore Dust Monitoring and Remediation (Pilbara, WA) Graham O’Brien, CSIRO BHP Port Hedland Wind Fence: Innovations in dust control Ruth Peiffer, BHP Development and implementation of low-cost sensors and LiDAR for managing dust emissions due to mining activity Dusan Ilic, University of Newcastle Advancements, Innovations, and Initiatives for Optimizing the Treatment of Haul Roads Hamed Haghighi, Downer EDI Works Session 4a \| Q&A with Session Chair Session Presenter,	Session 4b I Mining and processing Analysing Impact Forces & Overcoming Speed, Heat and Pressure Issues in High Capacity Belt Support Applications Bradley Owen, Kinder Australia Pty Ltd Phosphorus association with goethite: Effects of Fe(II)-catalysed recrystallisation Niloofar Karimian, CSIRO Coarse Processing of South African Banded Iron Formation (BIF) Ashma Singh, Mintek Filtered tailings – An iron ore experience Leonardo Vimercati, DiefenbachSrl Session 4b \| Q&A with Session Chair Session Presenter,
5:00 PM - 6:30 PM	Welcome Reception

	Stream A	Stream B
7:30 AM - 8:30 AM	Day 1 \| Registration Opens & Arrival Networking
8:30 AM - 9:45 AM	Session 1 I Opening Plenary Welcome to Country Robyn Collard, Whadjuk Boodja Welcome from the Conference Chair Ralph Holmes, CSIRO Welcome from AusIMM Stephen Durkin, AusIMM Ministerial Address and Official Conference Opening Session Presenter, Keynote \| Race to Real Zero Christiaan Heyning, Fortescue Session 1 \| Q&A with Session Chair Session Presenter,
9:45 AM - 10:15 AM	Day 1 \| Morning Tea
10:15 AM - 12:15 PM	Session 2a \| Greener downstream processing Sponsored By Assessment and operation optimization of iron ore products under industry-scale blast furnace conditions towards decarbonization using state-of-the-edge CFD models Yansong Shen, UNSW Evaluation of the Environmental Benefits of Using a Conveyor Belt Mining System in an Open Pit Mine Douglas Oliveira, Samarco How are Indian mills changing feed charge mix to address the carbon emission norms? Dhruv Goel, SteelMint Session 2a \| Q&A with Session Chair Session Presenter, Making a positive change: Evolving the modern Integrated Remote Operations Centre to optimize and support carbon-neutral value chains Jarrod Bassan, HATCH Immortality Design of the allflux Upstream Classifier in the Iron Ore Industry - for a safe workplace and an economic, sustainable, highly efficient separation technology Marco Steinberg, Hazemag allmineral Australia Pty. Ltd. Case Studies Illustrating the role of F-Series Reconciliations in Production Forecast Improvement Initiatives Steve Loach, BHP-WAIO Session 2a \| Q&A with Session Chair Session Presenter,	Session 2b \| Exploration and geology Sponsored By An Iron Ore Detective Story in Papua New Guinea Erick Ramanaidou, CSIRO Mineral Resources Kisoro-Kabale Iron Ore Project in South Western Uganda: Unlocking a new High grade Iron Ore region for Exploration and Development Lee White, Kalem Group Pty Ltd Characterisation of the Iron Bridge magnetite project Erick Ramanaidou, CSIRO Mineral Resources Session 2b \| Q&A with Session Chair Session Presenter, JORC 202X: An update on the progress and next steps for the JORC Code Review Leigh Slomp, AusIMM Geoscience 2033: A vision for mineral exploration in 10 years Lance Karlson, BHP New occurrence of banded iron formations in the Minvoul region, Ntem complex (Northern Gabon) Mario Iglesias-Martinez, CSIRO Session 2b \| Q&A with Session Chair Session Presenter,
12:15 PM - 1:15 PM	Day 1 \| Lunch
1:15 PM - 3:15 PM	Session 3 \| Greener downstream processing continued Keynote \| Fundamental Research and Partnerships - Unlocking the use of Pilbara Iron Ore in Low Carbon Ironmaking Darren Matthews, Rio Tinto Session 3 \| Q&A with Session Chair Session Presenter, The Boycott Effect - A Pathway to Achieving High Grade Iron Ore Kevin Galvin, ARC Centre of Excellence for Enabling Eco-Efficient Beneficiation of Minerals A guide to ground disturbance permitting and managing ESG risk Brian Spence, K2fly Session 3 \| Q&A with Session Chair Session Presenter, Keynote \| Western Australia’s iron ore sector Hon Bill Johnston MLA, Minister for Mines and Petroleum; Energy; Corrective Services; Industrial Relations Session 3 \| Q&A with Session Chair Session Presenter,
3:15 PM - 3:45 PM	Day 1 \| Afternoon Tea
3:45 PM - 5:00 PM	Session 4a I Health, safety, environment and community Supply Chain Approach to Iron Ore Dust Monitoring and Remediation (Pilbara, WA) Graham O’Brien, CSIRO BHP Port Hedland Wind Fence: Innovations in dust control Ruth Peiffer, BHP Development and implementation of low-cost sensors and LiDAR for managing dust emissions due to mining activity Dusan Ilic, University of Newcastle Advancements, Innovations, and Initiatives for Optimizing the Treatment of Haul Roads Hamed Haghighi, Downer EDI Works Session 4a \| Q&A with Session Chair Session Presenter,	Session 4b I Mining and processing Analysing Impact Forces & Overcoming Speed, Heat and Pressure Issues in High Capacity Belt Support Applications Bradley Owen, Kinder Australia Pty Ltd Phosphorus association with goethite: Effects of Fe(II)-catalysed recrystallisation Niloofar Karimian, CSIRO Coarse Processing of South African Banded Iron Formation (BIF) Ashma Singh, Mintek Filtered tailings – An iron ore experience Leonardo Vimercati, DiefenbachSrl Session 4b \| Q&A with Session Chair Session Presenter,
5:00 PM - 6:30 PM	Welcome Reception

	Stream A
7:30 AM - 8:30 AM	Day 1 \| Registration Opens & Arrival Networking
8:30 AM - 9:45 AM	Session 1 I Opening Plenary Welcome to Country Robyn Collard, Whadjuk Boodja Welcome from the Conference Chair Ralph Holmes, CSIRO Welcome from AusIMM Stephen Durkin, AusIMM Ministerial Address and Official Conference Opening Session Presenter, Keynote \| Race to Real Zero Christiaan Heyning, Fortescue Session 1 \| Q&A with Session Chair Session Presenter,
9:45 AM - 10:15 AM	Day 1 \| Morning Tea
10:15 AM - 12:15 PM	Session 2a \| Greener downstream processing Sponsored By Assessment and operation optimization of iron ore products under industry-scale blast furnace conditions towards decarbonization using state-of-the-edge CFD models Yansong Shen, UNSW Evaluation of the Environmental Benefits of Using a Conveyor Belt Mining System in an Open Pit Mine Douglas Oliveira, Samarco How are Indian mills changing feed charge mix to address the carbon emission norms? Dhruv Goel, SteelMint Session 2a \| Q&A with Session Chair Session Presenter, Making a positive change: Evolving the modern Integrated Remote Operations Centre to optimize and support carbon-neutral value chains Jarrod Bassan, HATCH Immortality Design of the allflux Upstream Classifier in the Iron Ore Industry - for a safe workplace and an economic, sustainable, highly efficient separation technology Marco Steinberg, Hazemag allmineral Australia Pty. Ltd. Case Studies Illustrating the role of F-Series Reconciliations in Production Forecast Improvement Initiatives Steve Loach, BHP-WAIO Session 2a \| Q&A with Session Chair Session Presenter,
12:15 PM - 1:15 PM	Day 1 \| Lunch
1:15 PM - 3:15 PM	Session 3 \| Greener downstream processing continued Keynote \| Fundamental Research and Partnerships - Unlocking the use of Pilbara Iron Ore in Low Carbon Ironmaking Darren Matthews, Rio Tinto Session 3 \| Q&A with Session Chair Session Presenter, The Boycott Effect - A Pathway to Achieving High Grade Iron Ore Kevin Galvin, ARC Centre of Excellence for Enabling Eco-Efficient Beneficiation of Minerals A guide to ground disturbance permitting and managing ESG risk Brian Spence, K2fly Session 3 \| Q&A with Session Chair Session Presenter, Keynote \| Western Australia’s iron ore sector Hon Bill Johnston MLA, Minister for Mines and Petroleum; Energy; Corrective Services; Industrial Relations Session 3 \| Q&A with Session Chair Session Presenter,
3:15 PM - 3:45 PM	Day 1 \| Afternoon Tea
3:45 PM - 5:00 PM	Session 4a I Health, safety, environment and community Supply Chain Approach to Iron Ore Dust Monitoring and Remediation (Pilbara, WA) Graham O’Brien, CSIRO BHP Port Hedland Wind Fence: Innovations in dust control Ruth Peiffer, BHP Development and implementation of low-cost sensors and LiDAR for managing dust emissions due to mining activity Dusan Ilic, University of Newcastle Advancements, Innovations, and Initiatives for Optimizing the Treatment of Haul Roads Hamed Haghighi, Downer EDI Works Session 4a \| Q&A with Session Chair Session Presenter,
5:00 PM - 6:30 PM	Welcome Reception

	Stream B
7:30 AM - 8:30 AM	Day 1 \| Registration Opens & Arrival Networking
8:30 AM - 9:45 AM	Session 1 I Opening Plenary Welcome to Country Robyn Collard, Whadjuk Boodja Welcome from the Conference Chair Ralph Holmes, CSIRO Welcome from AusIMM Stephen Durkin, AusIMM Ministerial Address and Official Conference Opening Session Presenter, Keynote \| Race to Real Zero Christiaan Heyning, Fortescue Session 1 \| Q&A with Session Chair Session Presenter,
9:45 AM - 10:15 AM	Day 1 \| Morning Tea
10:15 AM - 12:15 PM	Session 2b \| Exploration and geology Sponsored By An Iron Ore Detective Story in Papua New Guinea Erick Ramanaidou, CSIRO Mineral Resources Kisoro-Kabale Iron Ore Project in South Western Uganda: Unlocking a new High grade Iron Ore region for Exploration and Development Lee White, Kalem Group Pty Ltd Characterisation of the Iron Bridge magnetite project Erick Ramanaidou, CSIRO Mineral Resources Session 2b \| Q&A with Session Chair Session Presenter, JORC 202X: An update on the progress and next steps for the JORC Code Review Leigh Slomp, AusIMM Geoscience 2033: A vision for mineral exploration in 10 years Lance Karlson, BHP New occurrence of banded iron formations in the Minvoul region, Ntem complex (Northern Gabon) Mario Iglesias-Martinez, CSIRO Session 2b \| Q&A with Session Chair Session Presenter,
12:15 PM - 1:15 PM	Day 1 \| Lunch
1:15 PM - 3:15 PM	Session 3 \| Greener downstream processing continued Keynote \| Fundamental Research and Partnerships - Unlocking the use of Pilbara Iron Ore in Low Carbon Ironmaking Darren Matthews, Rio Tinto Session 3 \| Q&A with Session Chair Session Presenter, The Boycott Effect - A Pathway to Achieving High Grade Iron Ore Kevin Galvin, ARC Centre of Excellence for Enabling Eco-Efficient Beneficiation of Minerals A guide to ground disturbance permitting and managing ESG risk Brian Spence, K2fly Session 3 \| Q&A with Session Chair Session Presenter, Keynote \| Western Australia’s iron ore sector Hon Bill Johnston MLA, Minister for Mines and Petroleum; Energy; Corrective Services; Industrial Relations Session 3 \| Q&A with Session Chair Session Presenter,
3:15 PM - 3:45 PM	Day 1 \| Afternoon Tea
3:45 PM - 5:00 PM	Session 4b I Mining and processing Analysing Impact Forces & Overcoming Speed, Heat and Pressure Issues in High Capacity Belt Support Applications Bradley Owen, Kinder Australia Pty Ltd Phosphorus association with goethite: Effects of Fe(II)-catalysed recrystallisation Niloofar Karimian, CSIRO Coarse Processing of South African Banded Iron Formation (BIF) Ashma Singh, Mintek Filtered tailings – An iron ore experience Leonardo Vimercati, DiefenbachSrl Session 4b \| Q&A with Session Chair Session Presenter,
5:00 PM - 6:30 PM	Welcome Reception

Tuesday, September 19, 2023

	Stream A	Stream B
8:00 AM - 8:30 AM	Day 2 \| Registration Opens & Arrival Networking
8:30 AM - 10:00 AM	Session 5 I Plenary Day 2 Welcome from the Conference Chair Erick Ramanaidou, CSIRO Mineral Resources Keynote \| Bespoke technological solutions for lowering emissions of capital-intensive steel plants Paul Zulli, University of Wollongong Session 5 \| Q&A with Session Chair Session Presenter, Keynote \| Ambient air quality monitoring and the iron ore industry Christine Hass, Department of Water and Environmental Regulation Session 5 \| Q&A with Session Chair Session Presenter,
10:00 AM - 10:30 AM	Day 2 \| Morning Tea
10:30 AM - 12:30 PM	Session 6a \| Greener downstream processing - Green iron and steel production Hydrogen reduction of Australia iron ores Liming Lu, CSIRO The role of steelmaking desulphurization and EAF-smelter in hydrogen-based steelmaking route of low-grade iron ores Quanrong Fan, QRF Consultant Driving the transformation to hydrogen ironmaking: An experimental vertical shaft H2-DRI reactor facility in NZ Ben Yin, Victoria University of Wellington Session 6a \| Q&A with Session Chair Session Presenter, The Development of DRI Pellets For Green Steelmaking Christopher Ure, Worley The use of Zimbabwean limonite-coal composite pellet as a sustainable feed for pig iron production Themba Chisahwira, University of Zimbabwe Hydrogen reduction of raw and pre-oxidised NZ titanomagnetite ironsands in a small-scale high-temperature fluidised bed Bavinesh Maisuria, Robinsons Research Institute Session 6a \| Q&A with Session Chair Session Presenter,	Session 6b \| Ore processing and beneficiation Improved iron ore processing through digitalising conveyed ore flows using representative, real time multi-elemental analysis Henry Kurth, Scantech International Pty Ltd Developing dephosphorisation technique for iron ore with reduction process Osamu Ishiyama, Nippon Steel Corporation A Comparative Study of Two Laboratory Crushing Techniques for a South African Banded Iron Formation (BIF) Nichole Maistry, Mintek Session 6b \| Q&A with Session Chair Session Presenter, Iron Ore Transfer Chutes – Directions after 30 Years of Scale Modelling Peter Donecker, Bulk Solids Modelling Removal of phosphorus and gangue minerals from iron ore by a combined approach of alkaline drying and reverse flotation Altansukh Batnasan, Akita University Comparison between ball mill and vertical stirred mill for the fine grinding of a low-grade iron ore Josué Mesquita, Arcelormittal Maizières Research Session 6b \| Q&A with Session Chair Session Presenter,
12:30 PM - 1:30 PM	Day 2 \| Lunch
1:30 PM - 2:50 PM	Session 7a I Process optimisation Wet grinding, settling and filtering characteristics of Australian and Brazilian iron ores Qi Zhou, Central South University Moisture/particle interactions under oscillatory motion: model development Dusan Ilic, University of Newcastle Red mud to green iron: a proposed pathway for iron elution via bioleaching of bauxite residue Alexandra Tolley, University of Queensland Fundamental Sintering Characteristics of Fine-Grained Hematite Precipitate in A Simulated Sinter Blend Natalie Ware, CSIRO Session 7a \| Q&A with Session Chair Session Presenter,	Session 7b I Ore processing and beneficiation continued Minimizing cost of rheology control additives for iron ore slurries/tailings for enhancing processing performance Yee-Kwong Leong, University of Western Australia Design and Operation of Large Drum Scrubbers Geoffrey Beros, Queensland Pacific Metals An innovation application of LJC Automatic Magnetic Flotation Separator (LJC)in Magnetite Processing Lucy Ding, Longi Magnet Co Effect of hydrodynamic parameters on iron ore reverse flotation Mehdi Safari, Mintek Session 7b \| Q&A with Session Chair Session Presenter,
2:50 PM - 3:20 PM	Day 2 \| Afternoon Tea
3:20 PM - 4:05 PM	Session 8 I Mining and processing HPGR as an energy efficient alternative to ball mills in the iron ore processing circuit Edis Nunes, Metso Outotec Economic recovery of low-grade fine iron ore using the OPTIMA CLASSIFER® Franco van de Venter, Gravitas Minerals The critical role of mine planners in the evolution of closure at BHP Rebecca Getty, BHP Session 8 \| Q&A with Session Chair Session Presenter,
4:05 PM - 5:30 PM	Session 8 I Panel Discussion Panel Facilitator \| The green iron and steel transition for Pilbara iron ores John Clout, Clout Mining Panel Facilitator \| The green iron and steel transition for Pilbara iron ores Michelle Helm, Fortescue Panellist \| The green iron and steel transition for Pilbara iron ores Christian Boehm, Primetals Technologies Austria GmbH, Austria Panellist \| The green iron and steel transition for Pilbara iron ores Geoffrey Brooks, Swinburne University of Technology Panellist \| The green iron and steel transition for Pilbara iron ores Tom Honeyands, University of Newcastle Australia Panellist \| The green iron and steel transition for Pilbara iron ores Roberto Valery, Metso Panellist \| The green iron and steel transition for Pilbara iron ores Youngcheol Yang, POSCO Panellist \| The green iron and steel transition for Pilbara iron ores Paul Zulli, University of Wollongong
5:30 PM - 7:30 PM	Networking Cocktail Reception

	Stream A	Stream B
8:00 AM - 8:30 AM	Day 2 \| Registration Opens & Arrival Networking
8:30 AM - 10:00 AM	Session 5 I Plenary Day 2 Welcome from the Conference Chair Erick Ramanaidou, CSIRO Mineral Resources Keynote \| Bespoke technological solutions for lowering emissions of capital-intensive steel plants Paul Zulli, University of Wollongong Session 5 \| Q&A with Session Chair Session Presenter, Keynote \| Ambient air quality monitoring and the iron ore industry Christine Hass, Department of Water and Environmental Regulation Session 5 \| Q&A with Session Chair Session Presenter,
10:00 AM - 10:30 AM	Day 2 \| Morning Tea
10:30 AM - 12:30 PM	Session 6a \| Greener downstream processing - Green iron and steel production Hydrogen reduction of Australia iron ores Liming Lu, CSIRO The role of steelmaking desulphurization and EAF-smelter in hydrogen-based steelmaking route of low-grade iron ores Quanrong Fan, QRF Consultant Driving the transformation to hydrogen ironmaking: An experimental vertical shaft H2-DRI reactor facility in NZ Ben Yin, Victoria University of Wellington Session 6a \| Q&A with Session Chair Session Presenter, The Development of DRI Pellets For Green Steelmaking Christopher Ure, Worley The use of Zimbabwean limonite-coal composite pellet as a sustainable feed for pig iron production Themba Chisahwira, University of Zimbabwe Hydrogen reduction of raw and pre-oxidised NZ titanomagnetite ironsands in a small-scale high-temperature fluidised bed Bavinesh Maisuria, Robinsons Research Institute Session 6a \| Q&A with Session Chair Session Presenter,	Session 6b \| Ore processing and beneficiation Improved iron ore processing through digitalising conveyed ore flows using representative, real time multi-elemental analysis Henry Kurth, Scantech International Pty Ltd Developing dephosphorisation technique for iron ore with reduction process Osamu Ishiyama, Nippon Steel Corporation A Comparative Study of Two Laboratory Crushing Techniques for a South African Banded Iron Formation (BIF) Nichole Maistry, Mintek Session 6b \| Q&A with Session Chair Session Presenter, Iron Ore Transfer Chutes – Directions after 30 Years of Scale Modelling Peter Donecker, Bulk Solids Modelling Removal of phosphorus and gangue minerals from iron ore by a combined approach of alkaline drying and reverse flotation Altansukh Batnasan, Akita University Comparison between ball mill and vertical stirred mill for the fine grinding of a low-grade iron ore Josué Mesquita, Arcelormittal Maizières Research Session 6b \| Q&A with Session Chair Session Presenter,
12:30 PM - 1:30 PM	Day 2 \| Lunch
1:30 PM - 2:50 PM	Session 7a I Process optimisation Wet grinding, settling and filtering characteristics of Australian and Brazilian iron ores Qi Zhou, Central South University Moisture/particle interactions under oscillatory motion: model development Dusan Ilic, University of Newcastle Red mud to green iron: a proposed pathway for iron elution via bioleaching of bauxite residue Alexandra Tolley, University of Queensland Fundamental Sintering Characteristics of Fine-Grained Hematite Precipitate in A Simulated Sinter Blend Natalie Ware, CSIRO Session 7a \| Q&A with Session Chair Session Presenter,	Session 7b I Ore processing and beneficiation continued Minimizing cost of rheology control additives for iron ore slurries/tailings for enhancing processing performance Yee-Kwong Leong, University of Western Australia Design and Operation of Large Drum Scrubbers Geoffrey Beros, Queensland Pacific Metals An innovation application of LJC Automatic Magnetic Flotation Separator (LJC)in Magnetite Processing Lucy Ding, Longi Magnet Co Effect of hydrodynamic parameters on iron ore reverse flotation Mehdi Safari, Mintek Session 7b \| Q&A with Session Chair Session Presenter,
2:50 PM - 3:20 PM	Day 2 \| Afternoon Tea
3:20 PM - 4:05 PM	Session 8 I Mining and processing HPGR as an energy efficient alternative to ball mills in the iron ore processing circuit Edis Nunes, Metso Outotec Economic recovery of low-grade fine iron ore using the OPTIMA CLASSIFER® Franco van de Venter, Gravitas Minerals The critical role of mine planners in the evolution of closure at BHP Rebecca Getty, BHP Session 8 \| Q&A with Session Chair Session Presenter,
4:05 PM - 5:30 PM	Session 8 I Panel Discussion Panel Facilitator \| The green iron and steel transition for Pilbara iron ores John Clout, Clout Mining Panel Facilitator \| The green iron and steel transition for Pilbara iron ores Michelle Helm, Fortescue Panellist \| The green iron and steel transition for Pilbara iron ores Christian Boehm, Primetals Technologies Austria GmbH, Austria Panellist \| The green iron and steel transition for Pilbara iron ores Geoffrey Brooks, Swinburne University of Technology Panellist \| The green iron and steel transition for Pilbara iron ores Tom Honeyands, University of Newcastle Australia Panellist \| The green iron and steel transition for Pilbara iron ores Roberto Valery, Metso Panellist \| The green iron and steel transition for Pilbara iron ores Youngcheol Yang, POSCO Panellist \| The green iron and steel transition for Pilbara iron ores Paul Zulli, University of Wollongong
5:30 PM - 7:30 PM	Networking Cocktail Reception

	Stream A
8:00 AM - 8:30 AM	Day 2 \| Registration Opens & Arrival Networking
8:30 AM - 10:00 AM	Session 5 I Plenary Day 2 Welcome from the Conference Chair Erick Ramanaidou, CSIRO Mineral Resources Keynote \| Bespoke technological solutions for lowering emissions of capital-intensive steel plants Paul Zulli, University of Wollongong Session 5 \| Q&A with Session Chair Session Presenter, Keynote \| Ambient air quality monitoring and the iron ore industry Christine Hass, Department of Water and Environmental Regulation Session 5 \| Q&A with Session Chair Session Presenter,
10:00 AM - 10:30 AM	Day 2 \| Morning Tea
10:30 AM - 12:30 PM	Session 6a \| Greener downstream processing - Green iron and steel production Hydrogen reduction of Australia iron ores Liming Lu, CSIRO The role of steelmaking desulphurization and EAF-smelter in hydrogen-based steelmaking route of low-grade iron ores Quanrong Fan, QRF Consultant Driving the transformation to hydrogen ironmaking: An experimental vertical shaft H2-DRI reactor facility in NZ Ben Yin, Victoria University of Wellington Session 6a \| Q&A with Session Chair Session Presenter, The Development of DRI Pellets For Green Steelmaking Christopher Ure, Worley The use of Zimbabwean limonite-coal composite pellet as a sustainable feed for pig iron production Themba Chisahwira, University of Zimbabwe Hydrogen reduction of raw and pre-oxidised NZ titanomagnetite ironsands in a small-scale high-temperature fluidised bed Bavinesh Maisuria, Robinsons Research Institute Session 6a \| Q&A with Session Chair Session Presenter,
12:30 PM - 1:30 PM	Day 2 \| Lunch
1:30 PM - 2:50 PM	Session 7a I Process optimisation Wet grinding, settling and filtering characteristics of Australian and Brazilian iron ores Qi Zhou, Central South University Moisture/particle interactions under oscillatory motion: model development Dusan Ilic, University of Newcastle Red mud to green iron: a proposed pathway for iron elution via bioleaching of bauxite residue Alexandra Tolley, University of Queensland Fundamental Sintering Characteristics of Fine-Grained Hematite Precipitate in A Simulated Sinter Blend Natalie Ware, CSIRO Session 7a \| Q&A with Session Chair Session Presenter,
2:50 PM - 3:20 PM	Day 2 \| Afternoon Tea
3:20 PM - 4:05 PM	Session 8 I Mining and processing HPGR as an energy efficient alternative to ball mills in the iron ore processing circuit Edis Nunes, Metso Outotec Economic recovery of low-grade fine iron ore using the OPTIMA CLASSIFER® Franco van de Venter, Gravitas Minerals The critical role of mine planners in the evolution of closure at BHP Rebecca Getty, BHP Session 8 \| Q&A with Session Chair Session Presenter,
4:05 PM - 5:30 PM	Session 8 I Panel Discussion Panel Facilitator \| The green iron and steel transition for Pilbara iron ores John Clout, Clout Mining Panel Facilitator \| The green iron and steel transition for Pilbara iron ores Michelle Helm, Fortescue Panellist \| The green iron and steel transition for Pilbara iron ores Christian Boehm, Primetals Technologies Austria GmbH, Austria Panellist \| The green iron and steel transition for Pilbara iron ores Geoffrey Brooks, Swinburne University of Technology Panellist \| The green iron and steel transition for Pilbara iron ores Tom Honeyands, University of Newcastle Australia Panellist \| The green iron and steel transition for Pilbara iron ores Roberto Valery, Metso Panellist \| The green iron and steel transition for Pilbara iron ores Youngcheol Yang, POSCO Panellist \| The green iron and steel transition for Pilbara iron ores Paul Zulli, University of Wollongong
5:30 PM - 7:30 PM	Networking Cocktail Reception

	Stream B
8:00 AM - 8:30 AM	Day 2 \| Registration Opens & Arrival Networking
8:30 AM - 10:00 AM	Session 5 I Plenary Day 2 Welcome from the Conference Chair Erick Ramanaidou, CSIRO Mineral Resources Keynote \| Bespoke technological solutions for lowering emissions of capital-intensive steel plants Paul Zulli, University of Wollongong Session 5 \| Q&A with Session Chair Session Presenter, Keynote \| Ambient air quality monitoring and the iron ore industry Christine Hass, Department of Water and Environmental Regulation Session 5 \| Q&A with Session Chair Session Presenter,
10:00 AM - 10:30 AM	Day 2 \| Morning Tea
10:30 AM - 12:30 PM	Session 6b \| Ore processing and beneficiation Improved iron ore processing through digitalising conveyed ore flows using representative, real time multi-elemental analysis Henry Kurth, Scantech International Pty Ltd Developing dephosphorisation technique for iron ore with reduction process Osamu Ishiyama, Nippon Steel Corporation A Comparative Study of Two Laboratory Crushing Techniques for a South African Banded Iron Formation (BIF) Nichole Maistry, Mintek Session 6b \| Q&A with Session Chair Session Presenter, Iron Ore Transfer Chutes – Directions after 30 Years of Scale Modelling Peter Donecker, Bulk Solids Modelling Removal of phosphorus and gangue minerals from iron ore by a combined approach of alkaline drying and reverse flotation Altansukh Batnasan, Akita University Comparison between ball mill and vertical stirred mill for the fine grinding of a low-grade iron ore Josué Mesquita, Arcelormittal Maizières Research Session 6b \| Q&A with Session Chair Session Presenter,
12:30 PM - 1:30 PM	Day 2 \| Lunch
1:30 PM - 2:50 PM	Session 7b I Ore processing and beneficiation continued Minimizing cost of rheology control additives for iron ore slurries/tailings for enhancing processing performance Yee-Kwong Leong, University of Western Australia Design and Operation of Large Drum Scrubbers Geoffrey Beros, Queensland Pacific Metals An innovation application of LJC Automatic Magnetic Flotation Separator (LJC)in Magnetite Processing Lucy Ding, Longi Magnet Co Effect of hydrodynamic parameters on iron ore reverse flotation Mehdi Safari, Mintek Session 7b \| Q&A with Session Chair Session Presenter,
2:50 PM - 3:20 PM	Day 2 \| Afternoon Tea
3:20 PM - 4:05 PM	Session 8 I Mining and processing HPGR as an energy efficient alternative to ball mills in the iron ore processing circuit Edis Nunes, Metso Outotec Economic recovery of low-grade fine iron ore using the OPTIMA CLASSIFER® Franco van de Venter, Gravitas Minerals The critical role of mine planners in the evolution of closure at BHP Rebecca Getty, BHP Session 8 \| Q&A with Session Chair Session Presenter,
4:05 PM - 5:30 PM	Session 8 I Panel Discussion Panel Facilitator \| The green iron and steel transition for Pilbara iron ores John Clout, Clout Mining Panel Facilitator \| The green iron and steel transition for Pilbara iron ores Michelle Helm, Fortescue Panellist \| The green iron and steel transition for Pilbara iron ores Christian Boehm, Primetals Technologies Austria GmbH, Austria Panellist \| The green iron and steel transition for Pilbara iron ores Geoffrey Brooks, Swinburne University of Technology Panellist \| The green iron and steel transition for Pilbara iron ores Tom Honeyands, University of Newcastle Australia Panellist \| The green iron and steel transition for Pilbara iron ores Roberto Valery, Metso Panellist \| The green iron and steel transition for Pilbara iron ores Youngcheol Yang, POSCO Panellist \| The green iron and steel transition for Pilbara iron ores Paul Zulli, University of Wollongong
5:30 PM - 7:30 PM	Networking Cocktail Reception

Wednesday, September 20, 2023

	Stream A	Stream B
8:00 AM - 8:30 AM	Day 3 \| Registration Opens & Arrival Networking
8:30 AM - 10:00 AM	Session 9 I Plenary Day 3 Welcome from the Conference Chair Keith Vining, CSIRO Mineral Resources Keynote \| Geoscience – Are we transition future fit? Kerry Turnock, BHP Session 9 \| Q&A with Session Chair Session Presenter, Keynote \| Designing and Operating Automated, Connected and Electric Mines Alan Bye, Imvelo.ai Session 9 \| Q&A with Session Chair Session Presenter,
10:00 AM - 10:30 AM	Day 3 \| Morning Tea
10:30 AM - 12:30 PM	Session 10a \| Sintering and pelletising Effect of -1 mm particle size fraction on JPU permeability and Granulation Characterisation Tejbir Singh, The University of Newcastle Development of an Iron Ore Analysis Method Applying Assimilation Reaction to Coarse Ore Yul Hong, Hyundai Steel R&D Center Pelletization of New Zealand titanomagnetite ironsand for hydrogen direct reduction Shaira Mendoza, Robinson Research Institute Session 10a \| Q&A with Session Chair Session Presenter, Sintering Characteristics of Iron Ore Blends Containing Iron Ore Concentrates Hongliang Han, CSIRO Mineral Resources Effect of high oxygen enrichment on sintered ore quality and sintering phenomena Kenta Takehara, JFE steel co. Effect of hydrogen on voidage and permeability of ferrous burden in softening and melting process Mohammad Mainul Hoque, The University of Newcastle Mineralogy and Reducibility of Sinter Analogues in the Fe3O4-CaO-SiO2 (FCS) Ternary System under Hydrogen Atmosphere Isis Ignacio, Swinburne University of Technology/ CSIRO Session 10a \| Q&A with Session Chair Session Presenter,	Session 10b \| Ore characterisation and geometallurgy Examining the relationship (if any) between elevated phosphorus and ore textural type in Pilbara iron ores Mark Pownceby, CSIRO Mineral Resources Effect of calcium oxalate CaC2O4.H2O on the Reduction and Phosphorus partition of a High-P Brockman ore Sarath Hapugoda, CSIRO Mineral Resources The Behaviour of Iron Ore Granules: Laboratory and Commercial Sinter Plant Granulation Oluwatosin Aladejebi, University of Newcastle Australia Session 10b \| Q&A with Session Chair Session Presenter, Study on the dehydroxilation process of an ulfrafine goethitic ore Josué Mesquita, Arcelormittal Maizières Research Homogeneity Assessment of Crushed and Pulverised Iron Ore Certified Reference Materials. Implications for Laboratory Quality Control John Carter, Independent Mineral Standards Update of the geometallurgical model of a spirals circuit Josué Mesquita, Arcelormittal Maizières Research Session 10b \| Q&A with Session Chair Session Presenter,
12:30 PM - 1:30 PM	Day 3 \| Lunch
1:30 PM - 2:50 PM	Session 11a I DRI, HBI and Pig Iron production Direct reduced iron (DRI) – Value of process monitoring using X-ray diffraction (XRD) Uwe König, Malvern Panalytical Phosphorus distribution behavior in a hematite ore reduced in CO-H2 gaseous atmosphere Edson Kugara Chiwandika, Harare Institute of Technology Mechanisms on the impacts of basicity on hydrogen-rich gas-based direct reduction of pellets Chenmei Tang, School of Minerals Processing and Bioengineering, Central South University The Challenges of Removing Sulphur From Magnetite Ores To Meet Direct Reduction Specifications Damian Connelly, METS Group Session 11a \| Q&A with Session Chair Session Presenter,	Session 11b I Process optimisation Reducing waste in the iron ore industry by beneficiating slimes using new flotation regime and two stage processing route Lev Filippov, University of Lorraine New Insights into the Relationships Between Sinter Mineralogy and Physical Strength using QXRD and Optical Image Analysis Natalie Ware, CSIRO An Approach to the Calibration and Validation of Transfer Chute DEM Simulations Handling Cohesive Iron Ore Fines Richard Elliott, Sedgman Onyx QPM Hematite Precipitate as an Ironmaking Feed Material Graham Reynolds, Queensland Pacific Metals Session 11b \| Q&A with Session Chair Session Presenter,
2:50 PM - 3:20 PM	Day 3 \| Afternoon Tea
3:20 PM - 5:00 PM	Session 12 I Closing Plenary Keynote \| Prospective pathways to net-zero iron and steel products from Australian ores G.J. 'Gus' Nathan, University of Adelaide, Centre for Energy Technology Session 12 \| Q&A with Session Chair Session Presenter, Latest Safety and Maintenance Features of Top Service Gyratory Crushers Josh Garrett, FLSmidth Influence of iron ore chemistry and mineralogy on sticking and breakage of pellets inside shaft furnace Suneeti Purohit, CSIRO Smelting of Battery Metals Waste to Produce Green Steel Neil Goodman, Smelt Tech Consulting Session 12 \| Q&A with Session Chair Session Presenter, Presentation Awards & Conference Close Ralph Holmes, CSIRO

	Stream A	Stream B
8:00 AM - 8:30 AM	Day 3 \| Registration Opens & Arrival Networking
8:30 AM - 10:00 AM	Session 9 I Plenary Day 3 Welcome from the Conference Chair Keith Vining, CSIRO Mineral Resources Keynote \| Geoscience – Are we transition future fit? Kerry Turnock, BHP Session 9 \| Q&A with Session Chair Session Presenter, Keynote \| Designing and Operating Automated, Connected and Electric Mines Alan Bye, Imvelo.ai Session 9 \| Q&A with Session Chair Session Presenter,
10:00 AM - 10:30 AM	Day 3 \| Morning Tea
10:30 AM - 12:30 PM	Session 10a \| Sintering and pelletising Effect of -1 mm particle size fraction on JPU permeability and Granulation Characterisation Tejbir Singh, The University of Newcastle Development of an Iron Ore Analysis Method Applying Assimilation Reaction to Coarse Ore Yul Hong, Hyundai Steel R&D Center Pelletization of New Zealand titanomagnetite ironsand for hydrogen direct reduction Shaira Mendoza, Robinson Research Institute Session 10a \| Q&A with Session Chair Session Presenter, Sintering Characteristics of Iron Ore Blends Containing Iron Ore Concentrates Hongliang Han, CSIRO Mineral Resources Effect of high oxygen enrichment on sintered ore quality and sintering phenomena Kenta Takehara, JFE steel co. Effect of hydrogen on voidage and permeability of ferrous burden in softening and melting process Mohammad Mainul Hoque, The University of Newcastle Mineralogy and Reducibility of Sinter Analogues in the Fe3O4-CaO-SiO2 (FCS) Ternary System under Hydrogen Atmosphere Isis Ignacio, Swinburne University of Technology/ CSIRO Session 10a \| Q&A with Session Chair Session Presenter,	Session 10b \| Ore characterisation and geometallurgy Examining the relationship (if any) between elevated phosphorus and ore textural type in Pilbara iron ores Mark Pownceby, CSIRO Mineral Resources Effect of calcium oxalate CaC2O4.H2O on the Reduction and Phosphorus partition of a High-P Brockman ore Sarath Hapugoda, CSIRO Mineral Resources The Behaviour of Iron Ore Granules: Laboratory and Commercial Sinter Plant Granulation Oluwatosin Aladejebi, University of Newcastle Australia Session 10b \| Q&A with Session Chair Session Presenter, Study on the dehydroxilation process of an ulfrafine goethitic ore Josué Mesquita, Arcelormittal Maizières Research Homogeneity Assessment of Crushed and Pulverised Iron Ore Certified Reference Materials. Implications for Laboratory Quality Control John Carter, Independent Mineral Standards Update of the geometallurgical model of a spirals circuit Josué Mesquita, Arcelormittal Maizières Research Session 10b \| Q&A with Session Chair Session Presenter,
12:30 PM - 1:30 PM	Day 3 \| Lunch
1:30 PM - 2:50 PM	Session 11a I DRI, HBI and Pig Iron production Direct reduced iron (DRI) – Value of process monitoring using X-ray diffraction (XRD) Uwe König, Malvern Panalytical Phosphorus distribution behavior in a hematite ore reduced in CO-H2 gaseous atmosphere Edson Kugara Chiwandika, Harare Institute of Technology Mechanisms on the impacts of basicity on hydrogen-rich gas-based direct reduction of pellets Chenmei Tang, School of Minerals Processing and Bioengineering, Central South University The Challenges of Removing Sulphur From Magnetite Ores To Meet Direct Reduction Specifications Damian Connelly, METS Group Session 11a \| Q&A with Session Chair Session Presenter,	Session 11b I Process optimisation Reducing waste in the iron ore industry by beneficiating slimes using new flotation regime and two stage processing route Lev Filippov, University of Lorraine New Insights into the Relationships Between Sinter Mineralogy and Physical Strength using QXRD and Optical Image Analysis Natalie Ware, CSIRO An Approach to the Calibration and Validation of Transfer Chute DEM Simulations Handling Cohesive Iron Ore Fines Richard Elliott, Sedgman Onyx QPM Hematite Precipitate as an Ironmaking Feed Material Graham Reynolds, Queensland Pacific Metals Session 11b \| Q&A with Session Chair Session Presenter,
2:50 PM - 3:20 PM	Day 3 \| Afternoon Tea
3:20 PM - 5:00 PM	Session 12 I Closing Plenary Keynote \| Prospective pathways to net-zero iron and steel products from Australian ores G.J. 'Gus' Nathan, University of Adelaide, Centre for Energy Technology Session 12 \| Q&A with Session Chair Session Presenter, Latest Safety and Maintenance Features of Top Service Gyratory Crushers Josh Garrett, FLSmidth Influence of iron ore chemistry and mineralogy on sticking and breakage of pellets inside shaft furnace Suneeti Purohit, CSIRO Smelting of Battery Metals Waste to Produce Green Steel Neil Goodman, Smelt Tech Consulting Session 12 \| Q&A with Session Chair Session Presenter, Presentation Awards & Conference Close Ralph Holmes, CSIRO

	Stream A
8:00 AM - 8:30 AM	Day 3 \| Registration Opens & Arrival Networking
8:30 AM - 10:00 AM	Session 9 I Plenary Day 3 Welcome from the Conference Chair Keith Vining, CSIRO Mineral Resources Keynote \| Geoscience – Are we transition future fit? Kerry Turnock, BHP Session 9 \| Q&A with Session Chair Session Presenter, Keynote \| Designing and Operating Automated, Connected and Electric Mines Alan Bye, Imvelo.ai Session 9 \| Q&A with Session Chair Session Presenter,
10:00 AM - 10:30 AM	Day 3 \| Morning Tea
10:30 AM - 12:30 PM	Session 10a \| Sintering and pelletising Effect of -1 mm particle size fraction on JPU permeability and Granulation Characterisation Tejbir Singh, The University of Newcastle Development of an Iron Ore Analysis Method Applying Assimilation Reaction to Coarse Ore Yul Hong, Hyundai Steel R&D Center Pelletization of New Zealand titanomagnetite ironsand for hydrogen direct reduction Shaira Mendoza, Robinson Research Institute Session 10a \| Q&A with Session Chair Session Presenter, Sintering Characteristics of Iron Ore Blends Containing Iron Ore Concentrates Hongliang Han, CSIRO Mineral Resources Effect of high oxygen enrichment on sintered ore quality and sintering phenomena Kenta Takehara, JFE steel co. Effect of hydrogen on voidage and permeability of ferrous burden in softening and melting process Mohammad Mainul Hoque, The University of Newcastle Mineralogy and Reducibility of Sinter Analogues in the Fe3O4-CaO-SiO2 (FCS) Ternary System under Hydrogen Atmosphere Isis Ignacio, Swinburne University of Technology/ CSIRO Session 10a \| Q&A with Session Chair Session Presenter,
12:30 PM - 1:30 PM	Day 3 \| Lunch
1:30 PM - 2:50 PM	Session 11a I DRI, HBI and Pig Iron production Direct reduced iron (DRI) – Value of process monitoring using X-ray diffraction (XRD) Uwe König, Malvern Panalytical Phosphorus distribution behavior in a hematite ore reduced in CO-H2 gaseous atmosphere Edson Kugara Chiwandika, Harare Institute of Technology Mechanisms on the impacts of basicity on hydrogen-rich gas-based direct reduction of pellets Chenmei Tang, School of Minerals Processing and Bioengineering, Central South University The Challenges of Removing Sulphur From Magnetite Ores To Meet Direct Reduction Specifications Damian Connelly, METS Group Session 11a \| Q&A with Session Chair Session Presenter,
2:50 PM - 3:20 PM	Day 3 \| Afternoon Tea
3:20 PM - 5:00 PM	Session 12 I Closing Plenary Keynote \| Prospective pathways to net-zero iron and steel products from Australian ores G.J. 'Gus' Nathan, University of Adelaide, Centre for Energy Technology Session 12 \| Q&A with Session Chair Session Presenter, Latest Safety and Maintenance Features of Top Service Gyratory Crushers Josh Garrett, FLSmidth Influence of iron ore chemistry and mineralogy on sticking and breakage of pellets inside shaft furnace Suneeti Purohit, CSIRO Smelting of Battery Metals Waste to Produce Green Steel Neil Goodman, Smelt Tech Consulting Session 12 \| Q&A with Session Chair Session Presenter, Presentation Awards & Conference Close Ralph Holmes, CSIRO

	Stream B
8:00 AM - 8:30 AM	Day 3 \| Registration Opens & Arrival Networking
8:30 AM - 10:00 AM	Session 9 I Plenary Day 3 Welcome from the Conference Chair Keith Vining, CSIRO Mineral Resources Keynote \| Geoscience – Are we transition future fit? Kerry Turnock, BHP Session 9 \| Q&A with Session Chair Session Presenter, Keynote \| Designing and Operating Automated, Connected and Electric Mines Alan Bye, Imvelo.ai Session 9 \| Q&A with Session Chair Session Presenter,
10:00 AM - 10:30 AM	Day 3 \| Morning Tea
10:30 AM - 12:30 PM	Session 10b \| Ore characterisation and geometallurgy Examining the relationship (if any) between elevated phosphorus and ore textural type in Pilbara iron ores Mark Pownceby, CSIRO Mineral Resources Effect of calcium oxalate CaC2O4.H2O on the Reduction and Phosphorus partition of a High-P Brockman ore Sarath Hapugoda, CSIRO Mineral Resources The Behaviour of Iron Ore Granules: Laboratory and Commercial Sinter Plant Granulation Oluwatosin Aladejebi, University of Newcastle Australia Session 10b \| Q&A with Session Chair Session Presenter, Study on the dehydroxilation process of an ulfrafine goethitic ore Josué Mesquita, Arcelormittal Maizières Research Homogeneity Assessment of Crushed and Pulverised Iron Ore Certified Reference Materials. Implications for Laboratory Quality Control John Carter, Independent Mineral Standards Update of the geometallurgical model of a spirals circuit Josué Mesquita, Arcelormittal Maizières Research Session 10b \| Q&A with Session Chair Session Presenter,
12:30 PM - 1:30 PM	Day 3 \| Lunch
1:30 PM - 2:50 PM	Session 11b I Process optimisation Reducing waste in the iron ore industry by beneficiating slimes using new flotation regime and two stage processing route Lev Filippov, University of Lorraine New Insights into the Relationships Between Sinter Mineralogy and Physical Strength using QXRD and Optical Image Analysis Natalie Ware, CSIRO An Approach to the Calibration and Validation of Transfer Chute DEM Simulations Handling Cohesive Iron Ore Fines Richard Elliott, Sedgman Onyx QPM Hematite Precipitate as an Ironmaking Feed Material Graham Reynolds, Queensland Pacific Metals Session 11b \| Q&A with Session Chair Session Presenter,
2:50 PM - 3:20 PM	Day 3 \| Afternoon Tea
3:20 PM - 5:00 PM	Session 12 I Closing Plenary Keynote \| Prospective pathways to net-zero iron and steel products from Australian ores G.J. 'Gus' Nathan, University of Adelaide, Centre for Energy Technology Session 12 \| Q&A with Session Chair Session Presenter, Latest Safety and Maintenance Features of Top Service Gyratory Crushers Josh Garrett, FLSmidth Influence of iron ore chemistry and mineralogy on sticking and breakage of pellets inside shaft furnace Suneeti Purohit, CSIRO Smelting of Battery Metals Waste to Produce Green Steel Neil Goodman, Smelt Tech Consulting Session 12 \| Q&A with Session Chair Session Presenter, Presentation Awards & Conference Close Ralph Holmes, CSIRO

Thursday, September 21, 2023

	Post-conference workshops (not included in registration pricing)
6:00 AM - 8:00 PM	Pilbara Tour
8:00 AM - 5:00 PM	Perth Labs Tour
9:00 AM - 1:00 PM	Workshop \| How to make materials handling decisions

	Post-conference workshops (not included in registration pricing)
6:00 AM - 8:00 PM	Pilbara Tour
8:00 AM - 5:00 PM	Perth Labs Tour
9:00 AM - 1:00 PM	Workshop \| How to make materials handling decisions

	Post-conference workshops (not included in registration pricing)
6:00 AM - 8:00 PM	Pilbara Tour
8:00 AM - 5:00 PM	Perth Labs Tour
9:00 AM - 1:00 PM	Workshop \| How to make materials handling decisions

You need to enable JavaScript to access this site.

Follow these instructions on how to enable JavaScript.

Internet Explorer

Select Tools from the top menu
Choose Internet Options
Click on the Security tab
Click on Custom Level
Scroll down until you see the section labelled Scripting
Under Active Scripting, select Enable and click OK

Google Chrome

Select the menu icon on the browser toolbar
Select Settings
Click the Show advanced settings... link then Content Settings in the Privacy section
Select Allow all sites to run JavaScript (recommended) and click Done

Safari (Mac)

Select Safari from the top menu
Choose Preferences
Choose Security
Select the checkbox next to Enable JavaScript