Program | Mill Operators Conference 2024

Mill Operators Conference 2024 Program

The conference program is subject to change at any time, at the discretion of the advisory committee.

All times are listed below in AWST (Perth, Australia).

Sunday, October 20, 2024


8:00 AM - 12:00 PM	Workshop 1 \| Flotation Chemicals Fundamentals and Practice: Mitigating challenges in Sulphides separation
12:30 PM - 4:30 PM	Workshop 2 \| The Functional Performance Equation for Plant Grinding Circuits: A Master Class
6:00 PM - 8:00 PM	Metallurgical Society Delprat Lecture: The Perils of Conducting Plant


8:00 AM - 12:00 PM	Workshop 1 \| Flotation Chemicals Fundamentals and Practice: Mitigating challenges in Sulphides separation
12:30 PM - 4:30 PM	Workshop 2 \| The Functional Performance Equation for Plant Grinding Circuits: A Master Class
6:00 PM - 8:00 PM	Metallurgical Society Delprat Lecture: The Perils of Conducting Plant


8:00 AM - 12:00 PM	Workshop 1 \| Flotation Chemicals Fundamentals and Practice: Mitigating challenges in Sulphides separation
12:30 PM - 4:30 PM	Workshop 2 \| The Functional Performance Equation for Plant Grinding Circuits: A Master Class
6:00 PM - 8:00 PM	Metallurgical Society Delprat Lecture: The Perils of Conducting Plant

Monday, October 21, 2024


7:30 AM - 8:30 AM	Day 1 \| Registrations & arrival networking
8:30 AM - 10:10 AM	Session 1 \| Opening Plenary Welcome to Country Kevin Fitzgerald, Welcome from the Conference Co-Chairs David Seaman, Newmont Welcome from AusIMM Stephen Durkin, AusIMM Ministerial Address Minister, Keynote Presentation Katherin Domansky, Commercial Leader in Energy Transition Session 1 \| Q&A with Session Chair Rob Coleman, Core Resources Pty Ltd
10:10 AM - 10:40 AM	Day 1 \| Morning Tea
10:40 AM - 12:05 PM	Session 2 \| Plant Operations 1 Navigating the operational challenges at Campo Morado – a success story Richard Whittering, Ausenco Mastering Clay and Oxide Ores at St. Ives - Easing Circuit Constraints and Bottlenecks with Time-Honoured Comminution, Leach CIP, and Tailings Circuit Wizardry! Emily Mort, Gold Fields Gruyere Gold Mine Western Australia: Part 2 – Ramp Up To Operations, A Journey of Comminution, Optimisation And Challenges Goldie Heard, Gold Fields Optimizing Flotation Pulp Conditions to Improve Recovery at Newmont Red Chris Mine David Seaman, Newmont Session 2 \| Q&A with Session Chair Q&A,
12:05 PM - 1:05 PM	Day 1 \| Lunch
1:05 PM - 2:45 PM	Session 3 \| Comminution 1 Rockmedia Malcolm Powell, Liner Design Services Continuous Improvement of the Carrapateena Grinding Circuit Joe Seppelt, BHP Regrind Testwork Review - Analysis of Procedures and Results Julian Thomson, Ausenco Grinding circuit expansion and optimisation at the B2Gold Masbate Project, Philippines Aileen Insalada, Phil Gold Processing and Refining Corp Improved Cone Crusher Chamber Design and Operation Using Design and Simulation Tools Jeremy Hanhiniemi, Weir Minerals Session 3 \| Q&A with Session Chair Q&A,
2:45 PM - 3:15 PM	Day 1 \| Afternoon Tea
3:15 PM - 5:00 PM	Session 4 \| Flotation 1 The evolution of level control and its role in advanced control in the Northparkes flotation circuit Callan Lowes, Evolution Mining Improved Classification with the Cavex® DE Hydrocyclone for Mill Circuit, Coarse Particle Flotation, and Tailings Applications Jeremy Hanhiniemi, Weir Minerals Managing froth tenacity at BHP Carrapateena Fraser Burns, BHP Carrapateena Pioneering Coarse Particle Flotation – Transformative Insights from Five Years of Operation Campbell Haines, Newmont Optimisation Of Jameson Cells to Improve Concentrate Quality at BHP Carrapateena Jacqueline Reinhold, BHP Session 4 \| Q&A with Session Chair Q&A,
5:00 PM - 7:00 PM	Day 1 \| Welcome Reception


7:30 AM - 8:30 AM	Day 1 \| Registrations & arrival networking
8:30 AM - 10:10 AM	Session 1 \| Opening Plenary Welcome to Country Kevin Fitzgerald, Welcome from the Conference Co-Chairs David Seaman, Newmont Welcome from AusIMM Stephen Durkin, AusIMM Ministerial Address Minister, Keynote Presentation Katherin Domansky, Commercial Leader in Energy Transition Session 1 \| Q&A with Session Chair Rob Coleman, Core Resources Pty Ltd
10:10 AM - 10:40 AM	Day 1 \| Morning Tea
10:40 AM - 12:05 PM	Session 2 \| Plant Operations 1 Navigating the operational challenges at Campo Morado – a success story Richard Whittering, Ausenco Mastering Clay and Oxide Ores at St. Ives - Easing Circuit Constraints and Bottlenecks with Time-Honoured Comminution, Leach CIP, and Tailings Circuit Wizardry! Emily Mort, Gold Fields Gruyere Gold Mine Western Australia: Part 2 – Ramp Up To Operations, A Journey of Comminution, Optimisation And Challenges Goldie Heard, Gold Fields Optimizing Flotation Pulp Conditions to Improve Recovery at Newmont Red Chris Mine David Seaman, Newmont Session 2 \| Q&A with Session Chair Q&A,
12:05 PM - 1:05 PM	Day 1 \| Lunch
1:05 PM - 2:45 PM	Session 3 \| Comminution 1 Rockmedia Malcolm Powell, Liner Design Services Continuous Improvement of the Carrapateena Grinding Circuit Joe Seppelt, BHP Regrind Testwork Review - Analysis of Procedures and Results Julian Thomson, Ausenco Grinding circuit expansion and optimisation at the B2Gold Masbate Project, Philippines Aileen Insalada, Phil Gold Processing and Refining Corp Improved Cone Crusher Chamber Design and Operation Using Design and Simulation Tools Jeremy Hanhiniemi, Weir Minerals Session 3 \| Q&A with Session Chair Q&A,
2:45 PM - 3:15 PM	Day 1 \| Afternoon Tea
3:15 PM - 5:00 PM	Session 4 \| Flotation 1 The evolution of level control and its role in advanced control in the Northparkes flotation circuit Callan Lowes, Evolution Mining Improved Classification with the Cavex® DE Hydrocyclone for Mill Circuit, Coarse Particle Flotation, and Tailings Applications Jeremy Hanhiniemi, Weir Minerals Managing froth tenacity at BHP Carrapateena Fraser Burns, BHP Carrapateena Pioneering Coarse Particle Flotation – Transformative Insights from Five Years of Operation Campbell Haines, Newmont Optimisation Of Jameson Cells to Improve Concentrate Quality at BHP Carrapateena Jacqueline Reinhold, BHP Session 4 \| Q&A with Session Chair Q&A,
5:00 PM - 7:00 PM	Day 1 \| Welcome Reception


7:30 AM - 8:30 AM	Day 1 \| Registrations & arrival networking
8:30 AM - 10:10 AM	Session 1 \| Opening Plenary Welcome to Country Kevin Fitzgerald, Welcome from the Conference Co-Chairs David Seaman, Newmont Welcome from AusIMM Stephen Durkin, AusIMM Ministerial Address Minister, Keynote Presentation Katherin Domansky, Commercial Leader in Energy Transition Session 1 \| Q&A with Session Chair Rob Coleman, Core Resources Pty Ltd
10:10 AM - 10:40 AM	Day 1 \| Morning Tea
10:40 AM - 12:05 PM	Session 2 \| Plant Operations 1 Navigating the operational challenges at Campo Morado – a success story Richard Whittering, Ausenco Mastering Clay and Oxide Ores at St. Ives - Easing Circuit Constraints and Bottlenecks with Time-Honoured Comminution, Leach CIP, and Tailings Circuit Wizardry! Emily Mort, Gold Fields Gruyere Gold Mine Western Australia: Part 2 – Ramp Up To Operations, A Journey of Comminution, Optimisation And Challenges Goldie Heard, Gold Fields Optimizing Flotation Pulp Conditions to Improve Recovery at Newmont Red Chris Mine David Seaman, Newmont Session 2 \| Q&A with Session Chair Q&A,
12:05 PM - 1:05 PM	Day 1 \| Lunch
1:05 PM - 2:45 PM	Session 3 \| Comminution 1 Rockmedia Malcolm Powell, Liner Design Services Continuous Improvement of the Carrapateena Grinding Circuit Joe Seppelt, BHP Regrind Testwork Review - Analysis of Procedures and Results Julian Thomson, Ausenco Grinding circuit expansion and optimisation at the B2Gold Masbate Project, Philippines Aileen Insalada, Phil Gold Processing and Refining Corp Improved Cone Crusher Chamber Design and Operation Using Design and Simulation Tools Jeremy Hanhiniemi, Weir Minerals Session 3 \| Q&A with Session Chair Q&A,
2:45 PM - 3:15 PM	Day 1 \| Afternoon Tea
3:15 PM - 5:00 PM	Session 4 \| Flotation 1 The evolution of level control and its role in advanced control in the Northparkes flotation circuit Callan Lowes, Evolution Mining Improved Classification with the Cavex® DE Hydrocyclone for Mill Circuit, Coarse Particle Flotation, and Tailings Applications Jeremy Hanhiniemi, Weir Minerals Managing froth tenacity at BHP Carrapateena Fraser Burns, BHP Carrapateena Pioneering Coarse Particle Flotation – Transformative Insights from Five Years of Operation Campbell Haines, Newmont Optimisation Of Jameson Cells to Improve Concentrate Quality at BHP Carrapateena Jacqueline Reinhold, BHP Session 4 \| Q&A with Session Chair Q&A,
5:00 PM - 7:00 PM	Day 1 \| Welcome Reception

Tuesday, October 22, 2024


8:00 AM - 8:30 AM	Day 2 \| Registrations & arrival networking
8:30 AM - 10:25 AM	Session 5 \| ESG Day 2 Welcome & Opening Remarks Brigitte Seaman, Newmont Keynote Presentation Mark Adams, KAAMA Consulting Keynote Q&A Q&A, Scats- What are they good for? Tim McCredden, IGO Ltd Plant design comparison of dry VRM milling plus magnetic separation with AG and ball milling plus magnetic separation for grange resources' Southdown Ore Dean David, Wood Redefining the battery limits of processing plants – improving Sustainability through the deployment of sensing technologies William Futcher, Newmont Session 5 \| Q&A with Session Chair Q&A,
10:25 AM - 10:55 AM	Day 2 \| Morning Tea
10:55 AM - 12:20 PM	Session 6 \| Flotation 2 Red Chris Flotation Circuit Expansion – From Piloting to Full Scale Kevin Li, Newmont Whiskey, Puddings, Shampoo and Insanity – A Taxonomy of Circulating Loads Joe Pease, Mineralis Consultants Pty Ltd Regrinding: A subtle mix of liberation and chemistry Chris Greet, Magotteaux Australia BRC Chalcocite Processing – Recovery Improvements Istvan Torok, Mount Isa Mines Session 6 \| Q&A with Session Chair Q&A,
12:20 PM - 1:20 PM	Day 2 \| Lunch
1:20 PM - 3:00 PM	Session 7 \| GeoMetallurgy Strategic Ore Planning - Using metallurgical performance data to drive mine planning for operational optimisation - Case Study 1 (Oxides versus Sulphides) Bianca Newcombe, Optifroth Solutions Metallurgical Test Work - The Beginning of the End or the End of the Beginning? Andrew Newell, RPM Global The effect of primary grind size on flotation recovery and the mineralogically limited grade-recovery curve at Olympic Dam Yan Li, BHP The benefits of using geometallurgical principles for metallurgical sample selection. Paul Greenhill, AMC Consultants Practical Geometallurgy – And Let There Be Light Duncan Bennett, Mineralis Consultants Pty Ltd Session 7 \| Q&A with Session Chair Q&A,
3:00 PM - 3:30 PM	Day 2 \| Afternoon Tea
3:30 PM - 5:00 PM	Session 8 \| Comminution 2 Optimising Ball Mill Grinding Circuits – It’s Not Just the Mill Brian Cornish, Me Elecmetal Tooling up for future innovation - turning overlooked process opportunities to immediate and long-term benefit Malcolm Powell, Liner Design Services A review of operating data over 50 years of secondary crushing prior to AG/SAG mills Rajiv Chandramohan, Ausenco Modelling to Prepare for and Mitigate the Impact of Increasing Ore Hardness at Lihir Lindon Pyle, Hatch Session 8 \| Q&A with Session Chair Q&A,
5:00 PM - 6:00 PM	Day 2 \| Pre-dinner Networking Drinks
6:30 PM - 9:30 PM	Day 2 \| Stand up Conference Dinner Sponsored By


8:00 AM - 8:30 AM	Day 2 \| Registrations & arrival networking
8:30 AM - 10:25 AM	Session 5 \| ESG Day 2 Welcome & Opening Remarks Brigitte Seaman, Newmont Keynote Presentation Mark Adams, KAAMA Consulting Keynote Q&A Q&A, Scats- What are they good for? Tim McCredden, IGO Ltd Plant design comparison of dry VRM milling plus magnetic separation with AG and ball milling plus magnetic separation for grange resources' Southdown Ore Dean David, Wood Redefining the battery limits of processing plants – improving Sustainability through the deployment of sensing technologies William Futcher, Newmont Session 5 \| Q&A with Session Chair Q&A,
10:25 AM - 10:55 AM	Day 2 \| Morning Tea
10:55 AM - 12:20 PM	Session 6 \| Flotation 2 Red Chris Flotation Circuit Expansion – From Piloting to Full Scale Kevin Li, Newmont Whiskey, Puddings, Shampoo and Insanity – A Taxonomy of Circulating Loads Joe Pease, Mineralis Consultants Pty Ltd Regrinding: A subtle mix of liberation and chemistry Chris Greet, Magotteaux Australia BRC Chalcocite Processing – Recovery Improvements Istvan Torok, Mount Isa Mines Session 6 \| Q&A with Session Chair Q&A,
12:20 PM - 1:20 PM	Day 2 \| Lunch
1:20 PM - 3:00 PM	Session 7 \| GeoMetallurgy Strategic Ore Planning - Using metallurgical performance data to drive mine planning for operational optimisation - Case Study 1 (Oxides versus Sulphides) Bianca Newcombe, Optifroth Solutions Metallurgical Test Work - The Beginning of the End or the End of the Beginning? Andrew Newell, RPM Global The effect of primary grind size on flotation recovery and the mineralogically limited grade-recovery curve at Olympic Dam Yan Li, BHP The benefits of using geometallurgical principles for metallurgical sample selection. Paul Greenhill, AMC Consultants Practical Geometallurgy – And Let There Be Light Duncan Bennett, Mineralis Consultants Pty Ltd Session 7 \| Q&A with Session Chair Q&A,
3:00 PM - 3:30 PM	Day 2 \| Afternoon Tea
3:30 PM - 5:00 PM	Session 8 \| Comminution 2 Optimising Ball Mill Grinding Circuits – It’s Not Just the Mill Brian Cornish, Me Elecmetal Tooling up for future innovation - turning overlooked process opportunities to immediate and long-term benefit Malcolm Powell, Liner Design Services A review of operating data over 50 years of secondary crushing prior to AG/SAG mills Rajiv Chandramohan, Ausenco Modelling to Prepare for and Mitigate the Impact of Increasing Ore Hardness at Lihir Lindon Pyle, Hatch Session 8 \| Q&A with Session Chair Q&A,
5:00 PM - 6:00 PM	Day 2 \| Pre-dinner Networking Drinks
6:30 PM - 9:30 PM	Day 2 \| Stand up Conference Dinner Sponsored By


8:00 AM - 8:30 AM	Day 2 \| Registrations & arrival networking
8:30 AM - 10:25 AM	Session 5 \| ESG Day 2 Welcome & Opening Remarks Brigitte Seaman, Newmont Keynote Presentation Mark Adams, KAAMA Consulting Keynote Q&A Q&A, Scats- What are they good for? Tim McCredden, IGO Ltd Plant design comparison of dry VRM milling plus magnetic separation with AG and ball milling plus magnetic separation for grange resources' Southdown Ore Dean David, Wood Redefining the battery limits of processing plants – improving Sustainability through the deployment of sensing technologies William Futcher, Newmont Session 5 \| Q&A with Session Chair Q&A,
10:25 AM - 10:55 AM	Day 2 \| Morning Tea
10:55 AM - 12:20 PM	Session 6 \| Flotation 2 Red Chris Flotation Circuit Expansion – From Piloting to Full Scale Kevin Li, Newmont Whiskey, Puddings, Shampoo and Insanity – A Taxonomy of Circulating Loads Joe Pease, Mineralis Consultants Pty Ltd Regrinding: A subtle mix of liberation and chemistry Chris Greet, Magotteaux Australia BRC Chalcocite Processing – Recovery Improvements Istvan Torok, Mount Isa Mines Session 6 \| Q&A with Session Chair Q&A,
12:20 PM - 1:20 PM	Day 2 \| Lunch
1:20 PM - 3:00 PM	Session 7 \| GeoMetallurgy Strategic Ore Planning - Using metallurgical performance data to drive mine planning for operational optimisation - Case Study 1 (Oxides versus Sulphides) Bianca Newcombe, Optifroth Solutions Metallurgical Test Work - The Beginning of the End or the End of the Beginning? Andrew Newell, RPM Global The effect of primary grind size on flotation recovery and the mineralogically limited grade-recovery curve at Olympic Dam Yan Li, BHP The benefits of using geometallurgical principles for metallurgical sample selection. Paul Greenhill, AMC Consultants Practical Geometallurgy – And Let There Be Light Duncan Bennett, Mineralis Consultants Pty Ltd Session 7 \| Q&A with Session Chair Q&A,
3:00 PM - 3:30 PM	Day 2 \| Afternoon Tea
3:30 PM - 5:00 PM	Session 8 \| Comminution 2 Optimising Ball Mill Grinding Circuits – It’s Not Just the Mill Brian Cornish, Me Elecmetal Tooling up for future innovation - turning overlooked process opportunities to immediate and long-term benefit Malcolm Powell, Liner Design Services A review of operating data over 50 years of secondary crushing prior to AG/SAG mills Rajiv Chandramohan, Ausenco Modelling to Prepare for and Mitigate the Impact of Increasing Ore Hardness at Lihir Lindon Pyle, Hatch Session 8 \| Q&A with Session Chair Q&A,
5:00 PM - 6:00 PM	Day 2 \| Pre-dinner Networking Drinks
6:30 PM - 9:30 PM	Day 2 \| Stand up Conference Dinner Sponsored By

Wednesday, October 23, 2024


8:30 AM - 9:00 AM	Day 3 \| Registrations & arrival networking
9:00 AM - 10:15 AM	Session 9 \| Panel discussion Day 3 Welcome & Opening Remarks Dean David, Wood Panel Facilitator \| Metal accounting - usually overlooked but it looks back Dean David, Wood Panel \| Metal accounting - usually overlooked but it looks back Chevaun Gellie, Newmont Panel \| Metal accounting - usually overlooked but it looks back Peter Munro, Mineralis Consultants Pty Ltd Panel \| Metal accounting - usually overlooked but it looks back Reg Radford, Gold Fields MetSoc Alban Lynch Award Virginia Lawson, Glencore
10:15 AM - 10:45 AM	Day 3 \| Morning Tea
10:45 AM - 12:25 PM	Session 10 \| Process Modelling and Improvement Design and delivery of a Professional Certificate in Metal Accounting Gail Gnoinski, VinOre Isn’t it just bean counting? – Common Mistakes in Metallurgical Accounting Diana Felipe, JKTech Optimization from the Mine to Mill and back to the Mine at Newmont Lihir gold mine Jari Moilanen, Metso Finland The Optimisation of a Vertical Regrind Mill at Renaissance Minerals, Okvau Mine Andres Paz, Swiss Tower Mills Minerals Australia Pty Ltd CSA Mine New SAG Mills Optimisation Using Grindcurves German Dario Figueroa Salguero, Metals Acquisition Limited Session 10 \| Q&A with Session Chair Q&A,
12:25 PM - 1:25 PM	Day 3 \| Lunch
1:25 PM - 3:00 PM	Session 11 \| Process Automation Practical considerations in the design of flotation process twins for setpoint decision automation at MMG Dugald River Mine Warwick Smith, Hatch Mill relining automation: Applying lessons learned Simon Thompson, Russell Mineral Equipment Optimizing Grinding Circuit Performance: A Success Story at Harmony Gold's Hidden Valley Mine with Rockwell Automation’s Pavilion8 MPC Process Optimization technology Akhilesh Jain, Rockwell Automation Australia Ltd The Journey of Process Improvement - Ok Tedi's Vision Hans Liang, Mipac Pty Ltd Session 11 \| Q&A with Session Chair Q&A, Conference Close & AusIMM Awards David Seaman, Newmont Conference Close & AusIMM Awards Rob Coleman, Core Resources Pty Ltd


8:30 AM - 9:00 AM	Day 3 \| Registrations & arrival networking
9:00 AM - 10:15 AM	Session 9 \| Panel discussion Day 3 Welcome & Opening Remarks Dean David, Wood Panel Facilitator \| Metal accounting - usually overlooked but it looks back Dean David, Wood Panel \| Metal accounting - usually overlooked but it looks back Chevaun Gellie, Newmont Panel \| Metal accounting - usually overlooked but it looks back Peter Munro, Mineralis Consultants Pty Ltd Panel \| Metal accounting - usually overlooked but it looks back Reg Radford, Gold Fields MetSoc Alban Lynch Award Virginia Lawson, Glencore
10:15 AM - 10:45 AM	Day 3 \| Morning Tea
10:45 AM - 12:25 PM	Session 10 \| Process Modelling and Improvement Design and delivery of a Professional Certificate in Metal Accounting Gail Gnoinski, VinOre Isn’t it just bean counting? – Common Mistakes in Metallurgical Accounting Diana Felipe, JKTech Optimization from the Mine to Mill and back to the Mine at Newmont Lihir gold mine Jari Moilanen, Metso Finland The Optimisation of a Vertical Regrind Mill at Renaissance Minerals, Okvau Mine Andres Paz, Swiss Tower Mills Minerals Australia Pty Ltd CSA Mine New SAG Mills Optimisation Using Grindcurves German Dario Figueroa Salguero, Metals Acquisition Limited Session 10 \| Q&A with Session Chair Q&A,
12:25 PM - 1:25 PM	Day 3 \| Lunch
1:25 PM - 3:00 PM	Session 11 \| Process Automation Practical considerations in the design of flotation process twins for setpoint decision automation at MMG Dugald River Mine Warwick Smith, Hatch Mill relining automation: Applying lessons learned Simon Thompson, Russell Mineral Equipment Optimizing Grinding Circuit Performance: A Success Story at Harmony Gold's Hidden Valley Mine with Rockwell Automation’s Pavilion8 MPC Process Optimization technology Akhilesh Jain, Rockwell Automation Australia Ltd The Journey of Process Improvement - Ok Tedi's Vision Hans Liang, Mipac Pty Ltd Session 11 \| Q&A with Session Chair Q&A, Conference Close & AusIMM Awards David Seaman, Newmont Conference Close & AusIMM Awards Rob Coleman, Core Resources Pty Ltd


8:30 AM - 9:00 AM	Day 3 \| Registrations & arrival networking
9:00 AM - 10:15 AM	Session 9 \| Panel discussion Day 3 Welcome & Opening Remarks Dean David, Wood Panel Facilitator \| Metal accounting - usually overlooked but it looks back Dean David, Wood Panel \| Metal accounting - usually overlooked but it looks back Chevaun Gellie, Newmont Panel \| Metal accounting - usually overlooked but it looks back Peter Munro, Mineralis Consultants Pty Ltd Panel \| Metal accounting - usually overlooked but it looks back Reg Radford, Gold Fields MetSoc Alban Lynch Award Virginia Lawson, Glencore
10:15 AM - 10:45 AM	Day 3 \| Morning Tea
10:45 AM - 12:25 PM	Session 10 \| Process Modelling and Improvement Design and delivery of a Professional Certificate in Metal Accounting Gail Gnoinski, VinOre Isn’t it just bean counting? – Common Mistakes in Metallurgical Accounting Diana Felipe, JKTech Optimization from the Mine to Mill and back to the Mine at Newmont Lihir gold mine Jari Moilanen, Metso Finland The Optimisation of a Vertical Regrind Mill at Renaissance Minerals, Okvau Mine Andres Paz, Swiss Tower Mills Minerals Australia Pty Ltd CSA Mine New SAG Mills Optimisation Using Grindcurves German Dario Figueroa Salguero, Metals Acquisition Limited Session 10 \| Q&A with Session Chair Q&A,
12:25 PM - 1:25 PM	Day 3 \| Lunch
1:25 PM - 3:00 PM	Session 11 \| Process Automation Practical considerations in the design of flotation process twins for setpoint decision automation at MMG Dugald River Mine Warwick Smith, Hatch Mill relining automation: Applying lessons learned Simon Thompson, Russell Mineral Equipment Optimizing Grinding Circuit Performance: A Success Story at Harmony Gold's Hidden Valley Mine with Rockwell Automation’s Pavilion8 MPC Process Optimization technology Akhilesh Jain, Rockwell Automation Australia Ltd The Journey of Process Improvement - Ok Tedi's Vision Hans Liang, Mipac Pty Ltd Session 11 \| Q&A with Session Chair Q&A, Conference Close & AusIMM Awards David Seaman, Newmont Conference Close & AusIMM Awards Rob Coleman, Core Resources Pty Ltd

Thursday, October 24, 2024


8:00 AM - 3:30 PM	Metso Perth Technology Centre Workshop: Workshop: Dewatering and ultrafine flotation testwork, using the data, simulating your flowsheet
8:00 AM - 5:00 PM	AusIMM Consultants Society Forum
9:00 AM - 4:00 PM	AusIMM Workshop \| Introduction to Metal Accounting Best Practice


8:00 AM - 3:30 PM	Metso Perth Technology Centre Workshop: Workshop: Dewatering and ultrafine flotation testwork, using the data, simulating your flowsheet
8:00 AM - 5:00 PM	AusIMM Consultants Society Forum
9:00 AM - 4:00 PM	AusIMM Workshop \| Introduction to Metal Accounting Best Practice


8:00 AM - 3:30 PM	Metso Perth Technology Centre Workshop: Workshop: Dewatering and ultrafine flotation testwork, using the data, simulating your flowsheet
8:00 AM - 5:00 PM	AusIMM Consultants Society Forum
9:00 AM - 4:00 PM	AusIMM Workshop \| Introduction to Metal Accounting Best Practice

You need to enable JavaScript to access this site.

Follow these instructions on how to enable JavaScript.

Internet Explorer

Select Tools from the top menu
Choose Internet Options
Click on the Security tab
Click on Custom Level
Scroll down until you see the section labelled Scripting
Under Active Scripting, select Enable and click OK

Google Chrome

Select the menu icon on the browser toolbar
Select Settings
Click the Show advanced settings... link then Content Settings in the Privacy section
Select Allow all sites to run JavaScript (recommended) and click Done

Safari (Mac)

Select Safari from the top menu
Choose Preferences
Choose Security
Select the checkbox next to Enable JavaScript