Program | AusRock 2022

AusRock 2022 Program

The conference program is subject to change at any time, at the discretion of the organising committee.

All times are listed below in AEDT (Melbourne, Australia).

Monday, November 28, 2022

	Stream A	Stream B
9:00 AM - 10:30 AM	Workshop \| New developments and case studies in mine seismology Presenter \| New developments and case studies in mine seismology Dmitriy Malovichko, IMS Australia Facilitator \| New developments and case studies in mine seismology Baotang Shen, CSIRO Mineral Resources Presenter \| New developments and case studies in mine seismology Yi (Joey) Duan, CSIRO Mineral Resources Presenter \| New developments and case studies in mine seismology* Peter Kaiser,	Workshop \| Planetary rock mechanics Introduction and update on ISRM’s Commission of Planetary Rock Mechanics Serkan Saydam, UNSW Sydney Some attempts to infer mechanical properties of rocks and discontinuities in Mars and Some Comets Omer Aydan, University of the Ryukyus The stability of lunar lava tubes Antonio Bobet, Purdue University Evaluation of geometric distribution of Mars faults based on satellite data? Daisuke Asahina, Geological Survey of JAPAN / AIST Exploring the ancient terrains on Mars: What will they tell us about the early formation of the solar system Robert Anderson, NASA Jet Propulsion Laboratory
10:30 AM - 10:45 AM	Morning Tea
10:45 AM - 12:30 PM	Workshop \| New developments and case studies in mine seismology continued Facilitator \| New developments and case studies in mine seismology Baotang Shen, CSIRO Mineral Resources Presenter \| New developments and case studies in mine seismology Yi (Joey) Duan, CSIRO Mineral Resources Presenter \| New developments and case studies in mine seismology* Peter Kaiser, Seismic hazard mitigation of a geological structure reactivated by mining activities using hydraulic conditioning Gisela Viegas, Newcrest Mining Ltd Presenter \| New developments and case studies in mine seismology Dmitriy Malovichko, IMS Australia	Workshop \| Planetary rock mechanics continued Facilitator \| Discussion Forum Serkan Saydam, UNSW Sydney Discussion Forum Robert Anderson, NASA Jet Propulsion Laboratory Discussion Forum Daisuke Asahina, Geological Survey of JAPAN / AIST Discussion Forum Omer Aydan, University of the Ryukyus Discussion Forum Antonio Bobet, Purdue University
12:30 PM - 1:00 PM	Lunch
1:00 PM - 2:30 PM	Workshop \| Advancements in numerical modelling Recent development and future challenges in development of a reasonable numerical simulation method for rock blasting* Daisuke Fukuda, Hokkaido University, Japan State-of-the-art, Finite-Discrete Element Method (FDEM) modelling in rock mechanics* Andrea Lisjak, Geomechanica Inc. New developments in Itasca software – mesh generation, the IMASS constitutive model and cloud computing David Wines, Itasca	Workshop \| Rockburst and dynamic testing Facilitator \| Rockburst and dynamic testing Ismet Canbulat, UNSW Sydney Various considerations for systems of measurement within dynamic testing David Evans, DSI Underground Future considerations for dynamic testing of ground support Matthew Holden, Jennmar Dynamic laboratory testing of ground support: advantages and limitations Brendan Crompton, Epiroc
2:30 PM - 2:45 PM	Afternoon Tea
2:45 PM - 4:30 PM	Workshop \| Advancements in numerical modelling continued Developments in coupled hydromechanical modelling and seismic prediction Sevda Dehkhoda, Beck Engineering 3D rock fall and 3D pit shell optimisation analysis using Rocscience software Alison McQuillan, Rocscience Australia Discussion Forum Sevda Dehkhoda, Beck Engineering	Workshop \| Rockburst and dynamic testing continued Requirements to dynamic ground support and dynamic testing parameters of yielding support elements Charlie Li, Norwegian University of Science and Technology (NTNU) Coal burst control and management Ismet Canbulat, UNSW Sydney Underground observations: a guide to dynamic testing Peter Mikula, Mikula Geotechnics Pty Ltd Discussion Forum Ismet Canbulat, UNSW Sydney

	Stream A	Stream B
9:00 AM - 10:30 AM	Workshop \| New developments and case studies in mine seismology Presenter \| New developments and case studies in mine seismology Dmitriy Malovichko, IMS Australia Facilitator \| New developments and case studies in mine seismology Baotang Shen, CSIRO Mineral Resources Presenter \| New developments and case studies in mine seismology Yi (Joey) Duan, CSIRO Mineral Resources Presenter \| New developments and case studies in mine seismology* Peter Kaiser,	Workshop \| Planetary rock mechanics Introduction and update on ISRM’s Commission of Planetary Rock Mechanics Serkan Saydam, UNSW Sydney Some attempts to infer mechanical properties of rocks and discontinuities in Mars and Some Comets Omer Aydan, University of the Ryukyus The stability of lunar lava tubes Antonio Bobet, Purdue University Evaluation of geometric distribution of Mars faults based on satellite data? Daisuke Asahina, Geological Survey of JAPAN / AIST Exploring the ancient terrains on Mars: What will they tell us about the early formation of the solar system Robert Anderson, NASA Jet Propulsion Laboratory
10:30 AM - 10:45 AM	Morning Tea
10:45 AM - 12:30 PM	Workshop \| New developments and case studies in mine seismology continued Facilitator \| New developments and case studies in mine seismology Baotang Shen, CSIRO Mineral Resources Presenter \| New developments and case studies in mine seismology Yi (Joey) Duan, CSIRO Mineral Resources Presenter \| New developments and case studies in mine seismology* Peter Kaiser, Seismic hazard mitigation of a geological structure reactivated by mining activities using hydraulic conditioning Gisela Viegas, Newcrest Mining Ltd Presenter \| New developments and case studies in mine seismology Dmitriy Malovichko, IMS Australia	Workshop \| Planetary rock mechanics continued Facilitator \| Discussion Forum Serkan Saydam, UNSW Sydney Discussion Forum Robert Anderson, NASA Jet Propulsion Laboratory Discussion Forum Daisuke Asahina, Geological Survey of JAPAN / AIST Discussion Forum Omer Aydan, University of the Ryukyus Discussion Forum Antonio Bobet, Purdue University
12:30 PM - 1:00 PM	Lunch
1:00 PM - 2:30 PM	Workshop \| Advancements in numerical modelling Recent development and future challenges in development of a reasonable numerical simulation method for rock blasting* Daisuke Fukuda, Hokkaido University, Japan State-of-the-art, Finite-Discrete Element Method (FDEM) modelling in rock mechanics* Andrea Lisjak, Geomechanica Inc. New developments in Itasca software – mesh generation, the IMASS constitutive model and cloud computing David Wines, Itasca	Workshop \| Rockburst and dynamic testing Facilitator \| Rockburst and dynamic testing Ismet Canbulat, UNSW Sydney Various considerations for systems of measurement within dynamic testing David Evans, DSI Underground Future considerations for dynamic testing of ground support Matthew Holden, Jennmar Dynamic laboratory testing of ground support: advantages and limitations Brendan Crompton, Epiroc
2:30 PM - 2:45 PM	Afternoon Tea
2:45 PM - 4:30 PM	Workshop \| Advancements in numerical modelling continued Developments in coupled hydromechanical modelling and seismic prediction Sevda Dehkhoda, Beck Engineering 3D rock fall and 3D pit shell optimisation analysis using Rocscience software Alison McQuillan, Rocscience Australia Discussion Forum Sevda Dehkhoda, Beck Engineering	Workshop \| Rockburst and dynamic testing continued Requirements to dynamic ground support and dynamic testing parameters of yielding support elements Charlie Li, Norwegian University of Science and Technology (NTNU) Coal burst control and management Ismet Canbulat, UNSW Sydney Underground observations: a guide to dynamic testing Peter Mikula, Mikula Geotechnics Pty Ltd Discussion Forum Ismet Canbulat, UNSW Sydney

	Stream A
9:00 AM - 10:30 AM	Workshop \| New developments and case studies in mine seismology Presenter \| New developments and case studies in mine seismology Dmitriy Malovichko, IMS Australia Facilitator \| New developments and case studies in mine seismology Baotang Shen, CSIRO Mineral Resources Presenter \| New developments and case studies in mine seismology Yi (Joey) Duan, CSIRO Mineral Resources Presenter \| New developments and case studies in mine seismology* Peter Kaiser,
10:30 AM - 10:45 AM	Morning Tea
10:45 AM - 12:30 PM	Workshop \| New developments and case studies in mine seismology continued Facilitator \| New developments and case studies in mine seismology Baotang Shen, CSIRO Mineral Resources Presenter \| New developments and case studies in mine seismology Yi (Joey) Duan, CSIRO Mineral Resources Presenter \| New developments and case studies in mine seismology* Peter Kaiser, Seismic hazard mitigation of a geological structure reactivated by mining activities using hydraulic conditioning Gisela Viegas, Newcrest Mining Ltd Presenter \| New developments and case studies in mine seismology Dmitriy Malovichko, IMS Australia
12:30 PM - 1:00 PM	Lunch
1:00 PM - 2:30 PM	Workshop \| Advancements in numerical modelling Recent development and future challenges in development of a reasonable numerical simulation method for rock blasting* Daisuke Fukuda, Hokkaido University, Japan State-of-the-art, Finite-Discrete Element Method (FDEM) modelling in rock mechanics* Andrea Lisjak, Geomechanica Inc. New developments in Itasca software – mesh generation, the IMASS constitutive model and cloud computing David Wines, Itasca
2:30 PM - 2:45 PM	Afternoon Tea
2:45 PM - 4:30 PM	Workshop \| Advancements in numerical modelling continued Developments in coupled hydromechanical modelling and seismic prediction Sevda Dehkhoda, Beck Engineering 3D rock fall and 3D pit shell optimisation analysis using Rocscience software Alison McQuillan, Rocscience Australia Discussion Forum Sevda Dehkhoda, Beck Engineering

	Stream B
9:00 AM - 10:30 AM	Workshop \| Planetary rock mechanics Introduction and update on ISRM’s Commission of Planetary Rock Mechanics Serkan Saydam, UNSW Sydney Some attempts to infer mechanical properties of rocks and discontinuities in Mars and Some Comets Omer Aydan, University of the Ryukyus The stability of lunar lava tubes Antonio Bobet, Purdue University Evaluation of geometric distribution of Mars faults based on satellite data? Daisuke Asahina, Geological Survey of JAPAN / AIST Exploring the ancient terrains on Mars: What will they tell us about the early formation of the solar system Robert Anderson, NASA Jet Propulsion Laboratory
10:30 AM - 10:45 AM	Morning Tea
10:45 AM - 12:30 PM	Workshop \| Planetary rock mechanics continued Facilitator \| Discussion Forum Serkan Saydam, UNSW Sydney Discussion Forum Robert Anderson, NASA Jet Propulsion Laboratory Discussion Forum Daisuke Asahina, Geological Survey of JAPAN / AIST Discussion Forum Omer Aydan, University of the Ryukyus Discussion Forum Antonio Bobet, Purdue University
12:30 PM - 1:00 PM	Lunch
1:00 PM - 2:30 PM	Workshop \| Rockburst and dynamic testing Facilitator \| Rockburst and dynamic testing Ismet Canbulat, UNSW Sydney Various considerations for systems of measurement within dynamic testing David Evans, DSI Underground Future considerations for dynamic testing of ground support Matthew Holden, Jennmar Dynamic laboratory testing of ground support: advantages and limitations Brendan Crompton, Epiroc
2:30 PM - 2:45 PM	Afternoon Tea
2:45 PM - 4:30 PM	Workshop \| Rockburst and dynamic testing continued Requirements to dynamic ground support and dynamic testing parameters of yielding support elements Charlie Li, Norwegian University of Science and Technology (NTNU) Coal burst control and management Ismet Canbulat, UNSW Sydney Underground observations: a guide to dynamic testing Peter Mikula, Mikula Geotechnics Pty Ltd Discussion Forum Ismet Canbulat, UNSW Sydney

Tuesday, November 29, 2022

	Stream A	Stream B
7:30 AM - 8:30 AM	Day 1 \| Registration Opens and Arrival Networking
8:30 AM - 10:40 AM	Session 1 \| Opening Plenary Welcome from AusRock 2022 Conference Chair Ismet Canbulat, UNSW Sydney Welcome from AusRock 2022 Conference Chair Serkan Saydam, UNSW Sydney Welcome from AusIMM Stephen Durkin, AusIMM Welcome from ISRM President* Reşat Ulusay, International Society for Rock Mechanics and Rock Engineering Keynote \| Slope performance monitoring - Predictive tools to enable business continuity Rigoberto Rimmelin, BHP Keynote \| Resources today, resources tomorrow Rae O'Brien, Centennial Update from AusIMM Social and Environmental Committee Simit Raval, UNSW Sydney
10:40 AM - 11:10 AM	Day 1 \| Morning Tea
11:10 AM - 12:50 PM	Session 2a \| Ground control and support Session 2a \| Session Chair Ismet Canbulat, UNSW Sydney Formation of fracture zones under static and impact loading conditions and their characteristics Omer Aydan, University of the Ryukyus Analysis and Design of Faceroad Roof Support (ADFRS) Mark Colwell, Geotechnical Software Services Pty Ltd Ground support systems at Rampura Agucha Underground Mine* Binayak Banerjee, Hindustan Zinc Limited Roof characterisation for hazard planning at Oaky North Mine using geophysical data Terry Medhurst, Resource Geotechnical Pty Ltd	Session 2b \| Dynamic events and managing large deformations Session 2b \| Session Chair Rebecca Dixon, BHP 30 years of seismic system design, implementation and interpretation John Player, MineGeoTech A quantitative risk assessment tool for geothermal outbursts at Lihir Gold Mine Nicholas Kerr, Newcrest Mining Limited Outbursts, coalbursts and rockbursts Ian Gray, Sigra Pty Ltd Caving characteristics and support loading of longwalls in massive strata Ian Gray, Sigra Pty Ltd Dynamic fracture mechanism of thermally degraded brittle rock during strain burst Selahattin Akdag, UNSW Sydney
12:50 PM - 1:50 PM	Day 1 \| Lunch
1:50 PM - 3:30 PM	Session 3a \| Dynamic events and managing large deformations Session 3a \| Session Chair Selahattin Akdag, UNSW Sydney Session 3a \| Session Chair Guangyao Si, UNSW Sydney A review of dynamic energy-absorbing cable bolts Matthew Holden, Jennmar Data cross validation for a newly commissioned dynamic drop test facility David Evans, DSI Underground In-situ dynamic testing of mesh straps and W-straps Bradley Darlington, Sandvik Dynamic drop testing of Sandvik’s D47 and D39 MDX bolts at the SWERIM’s testing facility Osvaldo Vallati, Sandvik Mining & Rock Technology Support structure design for rockburst damage restraint initiated by a low-intensity seismic wave Eugie Kabwe, Beta-Hunt Underground Operations	Session 3b \| Geotechnical instrumentation and monitoring Session 3b \| Session Chair Sarah Webster, Northparkes CMOC Session 3b \| Session Chair Chunchen Wei, UNSW Sydney Developments in the measurement of stress in rock Ian Gray, Sigra Pty Ltd Rock stress measurements: a site geotechnical toolkit Peter Hills, Pitt & Sherry Operations Automated omission-free geotechnical deformation monitoring – A new method deployable by non-specialists Jochen Franke, Caroni Characterizing coalmine roof using measurement-while-drilling technology Manoj Khanal, CSIRO Longwall face floor failure assessment using a semi quantitative risk rating methodology Jason Emery, Optimum Geotechnics
3:30 PM - 4:00 PM	Day 1 \| Afternoon Tea
4:00 PM - 5:20 PM	Session 4a \| Ground control and support Session 4a \| Session Chair Serkan Saydam, UNSW Sydney Development of a damage/failure classification database for Kazakhstan underground mining industry Ali Mortazavi, Nazarbayev University The Coal Mine Roof Rating - An update in its calculation and mechanistically why it works Mark Colwell, Geotechnical Software Services Pty Ltd Measuring the influence of a sub level cave on open stoping at Telfer Matthew Woods, Newcrest Mining Limited Assessment of ground support requirements in coal burst prone mines Chunchen Wei, UNSW Sydney	Session 4b \| Ground control and support Session 4b \| Session Chair Sungsoon Mo, South32 Session 4b \| Session Chair Joung Oh, UNSW Sydney A design and construction methodology for deep mine development Christopher Drover, Beck Engineering Pty Ltd Aligning large excavations to the rock stress tensor Peter Hills, Pitt & Sherry Operations Accurately defining failure geometries and its variability Ka Hou Bernard Chu, Engenex The emerging role of the operational geotechnical engineer Charles Sweeney, Beca Ltd
5:20 PM - 5:30 PM	Poster Session Sponsored By A new test method for directional propagation of type-Ⅰ rock cracks Lexin Chen, Shandong University of Science and Technology Creep properties and energy evolution characteristics of weakly cemented rock under step loading Shanchao Hu, Shandong University of Science and Technology Use of fly-ash slurry in backfill grouting in coal mines Ning Jiang, Shandong University Of Science And Technology The influence of the strain rate and pre-static stress on the dynamic mechanical properties of medium sandstone Jun Wang, College of Energy and Mining Engineering, Shandong University of Science and Technology Multi-physical field coupling model development and parameter analysis of natural gas hydrate considering mechanical damage Xiangfu Wang, Shandong University of Science and Technology Mechanism analysis and particle flow simulation of water-sand inrush in thin bedrock working face Xunan Wu, College Of Energy And Mining Engineering, Shandong University Of Science And Technology Deformation failure characteristics of rock-coal composites with different height ratios Dawei Yin, College of Energy and Mining Engineering, Shandong University of Science and Technology Analysis on crack distribution and evolution characteristics of gangue backfilled working face roof Peng-Fei Zhang, Shandong University of Science and Technology Development of rock testing system with changeable stiffness and test research on failure characteristics of rock Yuanhui Zhu, Shandong University of Science and Technology Application of rock mass index in the prediction of mine water inrush and grouting quantity Weilong Zhu, College of Energy and Mining Engineering, Shandong University of Science and Technology
5:30 PM - 7:00 PM	Welcome Reception

	Stream A	Stream B
7:30 AM - 8:30 AM	Day 1 \| Registration Opens and Arrival Networking
8:30 AM - 10:40 AM	Session 1 \| Opening Plenary Welcome from AusRock 2022 Conference Chair Ismet Canbulat, UNSW Sydney Welcome from AusRock 2022 Conference Chair Serkan Saydam, UNSW Sydney Welcome from AusIMM Stephen Durkin, AusIMM Welcome from ISRM President* Reşat Ulusay, International Society for Rock Mechanics and Rock Engineering Keynote \| Slope performance monitoring - Predictive tools to enable business continuity Rigoberto Rimmelin, BHP Keynote \| Resources today, resources tomorrow Rae O'Brien, Centennial Update from AusIMM Social and Environmental Committee Simit Raval, UNSW Sydney
10:40 AM - 11:10 AM	Day 1 \| Morning Tea
11:10 AM - 12:50 PM	Session 2a \| Ground control and support Session 2a \| Session Chair Ismet Canbulat, UNSW Sydney Formation of fracture zones under static and impact loading conditions and their characteristics Omer Aydan, University of the Ryukyus Analysis and Design of Faceroad Roof Support (ADFRS) Mark Colwell, Geotechnical Software Services Pty Ltd Ground support systems at Rampura Agucha Underground Mine* Binayak Banerjee, Hindustan Zinc Limited Roof characterisation for hazard planning at Oaky North Mine using geophysical data Terry Medhurst, Resource Geotechnical Pty Ltd	Session 2b \| Dynamic events and managing large deformations Session 2b \| Session Chair Rebecca Dixon, BHP 30 years of seismic system design, implementation and interpretation John Player, MineGeoTech A quantitative risk assessment tool for geothermal outbursts at Lihir Gold Mine Nicholas Kerr, Newcrest Mining Limited Outbursts, coalbursts and rockbursts Ian Gray, Sigra Pty Ltd Caving characteristics and support loading of longwalls in massive strata Ian Gray, Sigra Pty Ltd Dynamic fracture mechanism of thermally degraded brittle rock during strain burst Selahattin Akdag, UNSW Sydney
12:50 PM - 1:50 PM	Day 1 \| Lunch
1:50 PM - 3:30 PM	Session 3a \| Dynamic events and managing large deformations Session 3a \| Session Chair Selahattin Akdag, UNSW Sydney Session 3a \| Session Chair Guangyao Si, UNSW Sydney A review of dynamic energy-absorbing cable bolts Matthew Holden, Jennmar Data cross validation for a newly commissioned dynamic drop test facility David Evans, DSI Underground In-situ dynamic testing of mesh straps and W-straps Bradley Darlington, Sandvik Dynamic drop testing of Sandvik’s D47 and D39 MDX bolts at the SWERIM’s testing facility Osvaldo Vallati, Sandvik Mining & Rock Technology Support structure design for rockburst damage restraint initiated by a low-intensity seismic wave Eugie Kabwe, Beta-Hunt Underground Operations	Session 3b \| Geotechnical instrumentation and monitoring Session 3b \| Session Chair Sarah Webster, Northparkes CMOC Session 3b \| Session Chair Chunchen Wei, UNSW Sydney Developments in the measurement of stress in rock Ian Gray, Sigra Pty Ltd Rock stress measurements: a site geotechnical toolkit Peter Hills, Pitt & Sherry Operations Automated omission-free geotechnical deformation monitoring – A new method deployable by non-specialists Jochen Franke, Caroni Characterizing coalmine roof using measurement-while-drilling technology Manoj Khanal, CSIRO Longwall face floor failure assessment using a semi quantitative risk rating methodology Jason Emery, Optimum Geotechnics
3:30 PM - 4:00 PM	Day 1 \| Afternoon Tea
4:00 PM - 5:20 PM	Session 4a \| Ground control and support Session 4a \| Session Chair Serkan Saydam, UNSW Sydney Development of a damage/failure classification database for Kazakhstan underground mining industry Ali Mortazavi, Nazarbayev University The Coal Mine Roof Rating - An update in its calculation and mechanistically why it works Mark Colwell, Geotechnical Software Services Pty Ltd Measuring the influence of a sub level cave on open stoping at Telfer Matthew Woods, Newcrest Mining Limited Assessment of ground support requirements in coal burst prone mines Chunchen Wei, UNSW Sydney	Session 4b \| Ground control and support Session 4b \| Session Chair Sungsoon Mo, South32 Session 4b \| Session Chair Joung Oh, UNSW Sydney A design and construction methodology for deep mine development Christopher Drover, Beck Engineering Pty Ltd Aligning large excavations to the rock stress tensor Peter Hills, Pitt & Sherry Operations Accurately defining failure geometries and its variability Ka Hou Bernard Chu, Engenex The emerging role of the operational geotechnical engineer Charles Sweeney, Beca Ltd
5:20 PM - 5:30 PM	Poster Session Sponsored By A new test method for directional propagation of type-Ⅰ rock cracks Lexin Chen, Shandong University of Science and Technology Creep properties and energy evolution characteristics of weakly cemented rock under step loading Shanchao Hu, Shandong University of Science and Technology Use of fly-ash slurry in backfill grouting in coal mines Ning Jiang, Shandong University Of Science And Technology The influence of the strain rate and pre-static stress on the dynamic mechanical properties of medium sandstone Jun Wang, College of Energy and Mining Engineering, Shandong University of Science and Technology Multi-physical field coupling model development and parameter analysis of natural gas hydrate considering mechanical damage Xiangfu Wang, Shandong University of Science and Technology Mechanism analysis and particle flow simulation of water-sand inrush in thin bedrock working face Xunan Wu, College Of Energy And Mining Engineering, Shandong University Of Science And Technology Deformation failure characteristics of rock-coal composites with different height ratios Dawei Yin, College of Energy and Mining Engineering, Shandong University of Science and Technology Analysis on crack distribution and evolution characteristics of gangue backfilled working face roof Peng-Fei Zhang, Shandong University of Science and Technology Development of rock testing system with changeable stiffness and test research on failure characteristics of rock Yuanhui Zhu, Shandong University of Science and Technology Application of rock mass index in the prediction of mine water inrush and grouting quantity Weilong Zhu, College of Energy and Mining Engineering, Shandong University of Science and Technology
5:30 PM - 7:00 PM	Welcome Reception

	Stream A
7:30 AM - 8:30 AM	Day 1 \| Registration Opens and Arrival Networking
8:30 AM - 10:40 AM	Session 1 \| Opening Plenary Welcome from AusRock 2022 Conference Chair Ismet Canbulat, UNSW Sydney Welcome from AusRock 2022 Conference Chair Serkan Saydam, UNSW Sydney Welcome from AusIMM Stephen Durkin, AusIMM Welcome from ISRM President* Reşat Ulusay, International Society for Rock Mechanics and Rock Engineering Keynote \| Slope performance monitoring - Predictive tools to enable business continuity Rigoberto Rimmelin, BHP Keynote \| Resources today, resources tomorrow Rae O'Brien, Centennial Update from AusIMM Social and Environmental Committee Simit Raval, UNSW Sydney
10:40 AM - 11:10 AM	Day 1 \| Morning Tea
11:10 AM - 12:50 PM	Session 2a \| Ground control and support Session 2a \| Session Chair Ismet Canbulat, UNSW Sydney Formation of fracture zones under static and impact loading conditions and their characteristics Omer Aydan, University of the Ryukyus Analysis and Design of Faceroad Roof Support (ADFRS) Mark Colwell, Geotechnical Software Services Pty Ltd Ground support systems at Rampura Agucha Underground Mine* Binayak Banerjee, Hindustan Zinc Limited Roof characterisation for hazard planning at Oaky North Mine using geophysical data Terry Medhurst, Resource Geotechnical Pty Ltd
12:50 PM - 1:50 PM	Day 1 \| Lunch
1:50 PM - 3:30 PM	Session 3a \| Dynamic events and managing large deformations Session 3a \| Session Chair Selahattin Akdag, UNSW Sydney Session 3a \| Session Chair Guangyao Si, UNSW Sydney A review of dynamic energy-absorbing cable bolts Matthew Holden, Jennmar Data cross validation for a newly commissioned dynamic drop test facility David Evans, DSI Underground In-situ dynamic testing of mesh straps and W-straps Bradley Darlington, Sandvik Dynamic drop testing of Sandvik’s D47 and D39 MDX bolts at the SWERIM’s testing facility Osvaldo Vallati, Sandvik Mining & Rock Technology Support structure design for rockburst damage restraint initiated by a low-intensity seismic wave Eugie Kabwe, Beta-Hunt Underground Operations
3:30 PM - 4:00 PM	Day 1 \| Afternoon Tea
4:00 PM - 5:20 PM	Session 4a \| Ground control and support Session 4a \| Session Chair Serkan Saydam, UNSW Sydney Development of a damage/failure classification database for Kazakhstan underground mining industry Ali Mortazavi, Nazarbayev University The Coal Mine Roof Rating - An update in its calculation and mechanistically why it works Mark Colwell, Geotechnical Software Services Pty Ltd Measuring the influence of a sub level cave on open stoping at Telfer Matthew Woods, Newcrest Mining Limited Assessment of ground support requirements in coal burst prone mines Chunchen Wei, UNSW Sydney
5:20 PM - 5:30 PM	Poster Session Sponsored By A new test method for directional propagation of type-Ⅰ rock cracks Lexin Chen, Shandong University of Science and Technology Creep properties and energy evolution characteristics of weakly cemented rock under step loading Shanchao Hu, Shandong University of Science and Technology Use of fly-ash slurry in backfill grouting in coal mines Ning Jiang, Shandong University Of Science And Technology The influence of the strain rate and pre-static stress on the dynamic mechanical properties of medium sandstone Jun Wang, College of Energy and Mining Engineering, Shandong University of Science and Technology Multi-physical field coupling model development and parameter analysis of natural gas hydrate considering mechanical damage Xiangfu Wang, Shandong University of Science and Technology Mechanism analysis and particle flow simulation of water-sand inrush in thin bedrock working face Xunan Wu, College Of Energy And Mining Engineering, Shandong University Of Science And Technology Deformation failure characteristics of rock-coal composites with different height ratios Dawei Yin, College of Energy and Mining Engineering, Shandong University of Science and Technology Analysis on crack distribution and evolution characteristics of gangue backfilled working face roof Peng-Fei Zhang, Shandong University of Science and Technology Development of rock testing system with changeable stiffness and test research on failure characteristics of rock Yuanhui Zhu, Shandong University of Science and Technology Application of rock mass index in the prediction of mine water inrush and grouting quantity Weilong Zhu, College of Energy and Mining Engineering, Shandong University of Science and Technology
5:30 PM - 7:00 PM	Welcome Reception

	Stream B
7:30 AM - 8:30 AM	Day 1 \| Registration Opens and Arrival Networking
8:30 AM - 10:40 AM	Session 1 \| Opening Plenary Welcome from AusRock 2022 Conference Chair Ismet Canbulat, UNSW Sydney Welcome from AusRock 2022 Conference Chair Serkan Saydam, UNSW Sydney Welcome from AusIMM Stephen Durkin, AusIMM Welcome from ISRM President* Reşat Ulusay, International Society for Rock Mechanics and Rock Engineering Keynote \| Slope performance monitoring - Predictive tools to enable business continuity Rigoberto Rimmelin, BHP Keynote \| Resources today, resources tomorrow Rae O'Brien, Centennial Update from AusIMM Social and Environmental Committee Simit Raval, UNSW Sydney
10:40 AM - 11:10 AM	Day 1 \| Morning Tea
11:10 AM - 12:50 PM	Session 2b \| Dynamic events and managing large deformations Session 2b \| Session Chair Rebecca Dixon, BHP 30 years of seismic system design, implementation and interpretation John Player, MineGeoTech A quantitative risk assessment tool for geothermal outbursts at Lihir Gold Mine Nicholas Kerr, Newcrest Mining Limited Outbursts, coalbursts and rockbursts Ian Gray, Sigra Pty Ltd Caving characteristics and support loading of longwalls in massive strata Ian Gray, Sigra Pty Ltd Dynamic fracture mechanism of thermally degraded brittle rock during strain burst Selahattin Akdag, UNSW Sydney
12:50 PM - 1:50 PM	Day 1 \| Lunch
1:50 PM - 3:30 PM	Session 3b \| Geotechnical instrumentation and monitoring Session 3b \| Session Chair Sarah Webster, Northparkes CMOC Session 3b \| Session Chair Chunchen Wei, UNSW Sydney Developments in the measurement of stress in rock Ian Gray, Sigra Pty Ltd Rock stress measurements: a site geotechnical toolkit Peter Hills, Pitt & Sherry Operations Automated omission-free geotechnical deformation monitoring – A new method deployable by non-specialists Jochen Franke, Caroni Characterizing coalmine roof using measurement-while-drilling technology Manoj Khanal, CSIRO Longwall face floor failure assessment using a semi quantitative risk rating methodology Jason Emery, Optimum Geotechnics
3:30 PM - 4:00 PM	Day 1 \| Afternoon Tea
4:00 PM - 5:20 PM	Session 4b \| Ground control and support Session 4b \| Session Chair Sungsoon Mo, South32 Session 4b \| Session Chair Joung Oh, UNSW Sydney A design and construction methodology for deep mine development Christopher Drover, Beck Engineering Pty Ltd Aligning large excavations to the rock stress tensor Peter Hills, Pitt & Sherry Operations Accurately defining failure geometries and its variability Ka Hou Bernard Chu, Engenex The emerging role of the operational geotechnical engineer Charles Sweeney, Beca Ltd
5:20 PM - 5:30 PM	Poster Session Sponsored By A new test method for directional propagation of type-Ⅰ rock cracks Lexin Chen, Shandong University of Science and Technology Creep properties and energy evolution characteristics of weakly cemented rock under step loading Shanchao Hu, Shandong University of Science and Technology Use of fly-ash slurry in backfill grouting in coal mines Ning Jiang, Shandong University Of Science And Technology The influence of the strain rate and pre-static stress on the dynamic mechanical properties of medium sandstone Jun Wang, College of Energy and Mining Engineering, Shandong University of Science and Technology Multi-physical field coupling model development and parameter analysis of natural gas hydrate considering mechanical damage Xiangfu Wang, Shandong University of Science and Technology Mechanism analysis and particle flow simulation of water-sand inrush in thin bedrock working face Xunan Wu, College Of Energy And Mining Engineering, Shandong University Of Science And Technology Deformation failure characteristics of rock-coal composites with different height ratios Dawei Yin, College of Energy and Mining Engineering, Shandong University of Science and Technology Analysis on crack distribution and evolution characteristics of gangue backfilled working face roof Peng-Fei Zhang, Shandong University of Science and Technology Development of rock testing system with changeable stiffness and test research on failure characteristics of rock Yuanhui Zhu, Shandong University of Science and Technology Application of rock mass index in the prediction of mine water inrush and grouting quantity Weilong Zhu, College of Energy and Mining Engineering, Shandong University of Science and Technology
5:30 PM - 7:00 PM	Welcome Reception

Wednesday, November 30, 2022

	Stream A	Stream B
8:00 AM - 8:30 AM	Day 2 \| Registration Opens and Arrival Networking
8:30 AM - 10:15 AM	Session 5 \| Opening Plenary Day 2 Welcome from AusRock 2022 Conference Chair Ismet Canbulat, UNSW Sydney Day 2 Welcome from AusRock 2022 Conference Chair Serkan Saydam, UNSW Sydney Keynote \| Mining geomechanics – A retrospective look toward the future Bruce Hebblewhite, B K Hebblewhite Consulting Keynote \| Characterizing the geomechanical properties of planetary objects Robert Anderson, NASA Jet Propulsion Laboratory
10:15 AM - 10:45 AM	Day 2 \| Morning Tea
10:45 AM - 12:45 PM	Session 6a \| Data management Session 6a \| Session Chair Lesley Munsamy, Anglo American Underground rock bolt detection Sarp Saydam, DSI Underground Data mining in rock mining: predicting mechanical properties of carbonate rocks using hyperspectral remote sensing Dagan Bakun-Mazor, Shamoon College of Engineering (SCE) Evaluation of rock joint on construction tunnel face using convolutional neural network Karnallisa Desmy Halim, Kansai University Data analytics and machine learning methods applied to underground coal mine roof convergence data Jason Emery, Optimum Geotechnics Multi-factor integrated data analytics and data-driven decision-making for ground control management Ruiyu Liang, UNSW Sydney	Session 6b \| Laboratory experimentation Session 6b \| Session Chair Antonio Bobet, Purdue University Session 6b \| Session Chair Hamed Lamei Ramandi, UNSW Sydney Evaluation of smartphone photogrammetry for 3D surface roughness computation Kunze Li, UNSW Sydney An improved hydro-mechanical model for 3D rough-walled rock joints considering contact area during shearing Xu Zhu, UNSW Sydney Estimation of rock brittleness for jointed specimens under cyclic triaxial loading* Phibe Khalkho, Indian Institute of Technology, Roorkee Development of a visual measurement system of geomaterials under triaxial compression Takahisa Endo, Nihon University Development of new performance prediction models for a raise boring machine based on indentation tests* Aydin Shaterpour Mamaghani, Istanbul Technical University Using a Schmidt hammer to estimate geotechnical properties of carbonate rocks in Israel Dagan Bakun-Mazor, Shamoon College of Engineering (SCE)
12:45 PM - 1:45 PM	Day 2 \| Lunch
1:45 PM - 3:45 PM	Session 7a \| Planetary rock mechanics Session 7a \| Session Chair Serkan Saydam, UNSW Sydney The risks and challenges of using earth rock mass classification systems on the moon Antonio Bobet, Purdue University Some considerations on rock dynamics issues in Mars Omer Aydan, University of the Ryukyus Investigation of the internal mechanical structure of Mars based on geometrical patterns of faults Yu Tsukurimichi, Nihon University Lunar sub-surface temperatures Nicholas Barnett, UNSW Sydney Analysis of horizontal opening stability in lunar regolith Timothy Pelech, UNSW Sydney Apollo 17 Landing and Science Missions Serkan Saydam, UNSW Sydney	Session 7b \| Slope stability Sponsored By Session 7b \| Session Chair Simit Raval, UNSW Sydney Session 7b \| Session Chair Kathryn Young, BHP Generation of 3D planar failure hazard maps for pit slope management David Tennant, Newcrest Mining Limited Slope radar monitoring – A partnership and infrastructure case study of scalability, reliability and availability Rebecca Dixon, BHP Slope radar monitoring – A partnership and infrastructure case study of scalability, reliability and availability Lincoln Tovey, BHP Australia Optimal slope profiles for maximum mine pit-wall steepness in Banded Iron Formation rocks* Stefano Utili, OptimalSlope Ltd Photogrammetry-based mapping techniques in slope stability management David Wang, Inspiration Seven Pty Ltd Rock slope stability analysis of abandoned quarry wall applying Q-slope method: Singapore case study Winn Kar, Newcastle Australia Institute of Higher Education Risk management using a total monitoring approach to managing slope instability hazards in open pits Neal Harries, Hexagon
3:45 PM - 4:15 PM	Day 2 \| Afternoon Tea
4:15 PM - 5:15 PM	Session 8a \| Mine design – geotechnical considerations Session 8a \| Session Chair Honghao Chen, UNSW Sydney Session 8a \| Session Chair Patrycja Sheffield, Centennial Ore recovery on a room and pillar zinc mine Jessica Morgana Ribeiro Santana, Nexa Resources Elastoplastic parameter change at Claystone Rock Mass during sliding failure at Warukin Formation, Indonesia* Galih Wiria Swana, Arutmin Indonesia Ltd. Characteristics of seismicity in the vicinity of a major dyke in a longwall coal mine Yi (Joey) Duan, CSIRO Mineral Resources	Session 8b \| Slope stability Sponsored By Session 8b \| Session Chair Matthew Woods, Newcrest Mining Limited Some considerations on rock slope stability issues in Afghanistan with emphasis on Kandahar Region Abdul Bari Jahed, University of the Ryukyus, Okinawa, Japan 3D limit equilibrium and finite element model development and calibration for coal mine slopes Glen Guy, Encompass Mining An analysis of impact of weak rock formation on mining-induced deformation of rock slope Clement Amagu Amagu, Rock Mechanics Laboratory, Graduate School Of Engineering, Hokkaido University
7:00 PM - 11:00 PM	Conference Dinner

	Stream A	Stream B
8:00 AM - 8:30 AM	Day 2 \| Registration Opens and Arrival Networking
8:30 AM - 10:15 AM	Session 5 \| Opening Plenary Day 2 Welcome from AusRock 2022 Conference Chair Ismet Canbulat, UNSW Sydney Day 2 Welcome from AusRock 2022 Conference Chair Serkan Saydam, UNSW Sydney Keynote \| Mining geomechanics – A retrospective look toward the future Bruce Hebblewhite, B K Hebblewhite Consulting Keynote \| Characterizing the geomechanical properties of planetary objects Robert Anderson, NASA Jet Propulsion Laboratory
10:15 AM - 10:45 AM	Day 2 \| Morning Tea
10:45 AM - 12:45 PM	Session 6a \| Data management Session 6a \| Session Chair Lesley Munsamy, Anglo American Underground rock bolt detection Sarp Saydam, DSI Underground Data mining in rock mining: predicting mechanical properties of carbonate rocks using hyperspectral remote sensing Dagan Bakun-Mazor, Shamoon College of Engineering (SCE) Evaluation of rock joint on construction tunnel face using convolutional neural network Karnallisa Desmy Halim, Kansai University Data analytics and machine learning methods applied to underground coal mine roof convergence data Jason Emery, Optimum Geotechnics Multi-factor integrated data analytics and data-driven decision-making for ground control management Ruiyu Liang, UNSW Sydney	Session 6b \| Laboratory experimentation Session 6b \| Session Chair Antonio Bobet, Purdue University Session 6b \| Session Chair Hamed Lamei Ramandi, UNSW Sydney Evaluation of smartphone photogrammetry for 3D surface roughness computation Kunze Li, UNSW Sydney An improved hydro-mechanical model for 3D rough-walled rock joints considering contact area during shearing Xu Zhu, UNSW Sydney Estimation of rock brittleness for jointed specimens under cyclic triaxial loading* Phibe Khalkho, Indian Institute of Technology, Roorkee Development of a visual measurement system of geomaterials under triaxial compression Takahisa Endo, Nihon University Development of new performance prediction models for a raise boring machine based on indentation tests* Aydin Shaterpour Mamaghani, Istanbul Technical University Using a Schmidt hammer to estimate geotechnical properties of carbonate rocks in Israel Dagan Bakun-Mazor, Shamoon College of Engineering (SCE)
12:45 PM - 1:45 PM	Day 2 \| Lunch
1:45 PM - 3:45 PM	Session 7a \| Planetary rock mechanics Session 7a \| Session Chair Serkan Saydam, UNSW Sydney The risks and challenges of using earth rock mass classification systems on the moon Antonio Bobet, Purdue University Some considerations on rock dynamics issues in Mars Omer Aydan, University of the Ryukyus Investigation of the internal mechanical structure of Mars based on geometrical patterns of faults Yu Tsukurimichi, Nihon University Lunar sub-surface temperatures Nicholas Barnett, UNSW Sydney Analysis of horizontal opening stability in lunar regolith Timothy Pelech, UNSW Sydney Apollo 17 Landing and Science Missions Serkan Saydam, UNSW Sydney	Session 7b \| Slope stability Sponsored By Session 7b \| Session Chair Simit Raval, UNSW Sydney Session 7b \| Session Chair Kathryn Young, BHP Generation of 3D planar failure hazard maps for pit slope management David Tennant, Newcrest Mining Limited Slope radar monitoring – A partnership and infrastructure case study of scalability, reliability and availability Rebecca Dixon, BHP Slope radar monitoring – A partnership and infrastructure case study of scalability, reliability and availability Lincoln Tovey, BHP Australia Optimal slope profiles for maximum mine pit-wall steepness in Banded Iron Formation rocks* Stefano Utili, OptimalSlope Ltd Photogrammetry-based mapping techniques in slope stability management David Wang, Inspiration Seven Pty Ltd Rock slope stability analysis of abandoned quarry wall applying Q-slope method: Singapore case study Winn Kar, Newcastle Australia Institute of Higher Education Risk management using a total monitoring approach to managing slope instability hazards in open pits Neal Harries, Hexagon
3:45 PM - 4:15 PM	Day 2 \| Afternoon Tea
4:15 PM - 5:15 PM	Session 8a \| Mine design – geotechnical considerations Session 8a \| Session Chair Honghao Chen, UNSW Sydney Session 8a \| Session Chair Patrycja Sheffield, Centennial Ore recovery on a room and pillar zinc mine Jessica Morgana Ribeiro Santana, Nexa Resources Elastoplastic parameter change at Claystone Rock Mass during sliding failure at Warukin Formation, Indonesia* Galih Wiria Swana, Arutmin Indonesia Ltd. Characteristics of seismicity in the vicinity of a major dyke in a longwall coal mine Yi (Joey) Duan, CSIRO Mineral Resources	Session 8b \| Slope stability Sponsored By Session 8b \| Session Chair Matthew Woods, Newcrest Mining Limited Some considerations on rock slope stability issues in Afghanistan with emphasis on Kandahar Region Abdul Bari Jahed, University of the Ryukyus, Okinawa, Japan 3D limit equilibrium and finite element model development and calibration for coal mine slopes Glen Guy, Encompass Mining An analysis of impact of weak rock formation on mining-induced deformation of rock slope Clement Amagu Amagu, Rock Mechanics Laboratory, Graduate School Of Engineering, Hokkaido University
7:00 PM - 11:00 PM	Conference Dinner

	Stream A
8:00 AM - 8:30 AM	Day 2 \| Registration Opens and Arrival Networking
8:30 AM - 10:15 AM	Session 5 \| Opening Plenary Day 2 Welcome from AusRock 2022 Conference Chair Ismet Canbulat, UNSW Sydney Day 2 Welcome from AusRock 2022 Conference Chair Serkan Saydam, UNSW Sydney Keynote \| Mining geomechanics – A retrospective look toward the future Bruce Hebblewhite, B K Hebblewhite Consulting Keynote \| Characterizing the geomechanical properties of planetary objects Robert Anderson, NASA Jet Propulsion Laboratory
10:15 AM - 10:45 AM	Day 2 \| Morning Tea
10:45 AM - 12:45 PM	Session 6a \| Data management Session 6a \| Session Chair Lesley Munsamy, Anglo American Underground rock bolt detection Sarp Saydam, DSI Underground Data mining in rock mining: predicting mechanical properties of carbonate rocks using hyperspectral remote sensing Dagan Bakun-Mazor, Shamoon College of Engineering (SCE) Evaluation of rock joint on construction tunnel face using convolutional neural network Karnallisa Desmy Halim, Kansai University Data analytics and machine learning methods applied to underground coal mine roof convergence data Jason Emery, Optimum Geotechnics Multi-factor integrated data analytics and data-driven decision-making for ground control management Ruiyu Liang, UNSW Sydney
12:45 PM - 1:45 PM	Day 2 \| Lunch
1:45 PM - 3:45 PM	Session 7a \| Planetary rock mechanics Session 7a \| Session Chair Serkan Saydam, UNSW Sydney The risks and challenges of using earth rock mass classification systems on the moon Antonio Bobet, Purdue University Some considerations on rock dynamics issues in Mars Omer Aydan, University of the Ryukyus Investigation of the internal mechanical structure of Mars based on geometrical patterns of faults Yu Tsukurimichi, Nihon University Lunar sub-surface temperatures Nicholas Barnett, UNSW Sydney Analysis of horizontal opening stability in lunar regolith Timothy Pelech, UNSW Sydney Apollo 17 Landing and Science Missions Serkan Saydam, UNSW Sydney
3:45 PM - 4:15 PM	Day 2 \| Afternoon Tea
4:15 PM - 5:15 PM	Session 8a \| Mine design – geotechnical considerations Session 8a \| Session Chair Honghao Chen, UNSW Sydney Session 8a \| Session Chair Patrycja Sheffield, Centennial Ore recovery on a room and pillar zinc mine Jessica Morgana Ribeiro Santana, Nexa Resources Elastoplastic parameter change at Claystone Rock Mass during sliding failure at Warukin Formation, Indonesia* Galih Wiria Swana, Arutmin Indonesia Ltd. Characteristics of seismicity in the vicinity of a major dyke in a longwall coal mine Yi (Joey) Duan, CSIRO Mineral Resources
7:00 PM - 11:00 PM	Conference Dinner

	Stream B
8:00 AM - 8:30 AM	Day 2 \| Registration Opens and Arrival Networking
8:30 AM - 10:15 AM	Session 5 \| Opening Plenary Day 2 Welcome from AusRock 2022 Conference Chair Ismet Canbulat, UNSW Sydney Day 2 Welcome from AusRock 2022 Conference Chair Serkan Saydam, UNSW Sydney Keynote \| Mining geomechanics – A retrospective look toward the future Bruce Hebblewhite, B K Hebblewhite Consulting Keynote \| Characterizing the geomechanical properties of planetary objects Robert Anderson, NASA Jet Propulsion Laboratory
10:15 AM - 10:45 AM	Day 2 \| Morning Tea
10:45 AM - 12:45 PM	Session 6b \| Laboratory experimentation Session 6b \| Session Chair Antonio Bobet, Purdue University Session 6b \| Session Chair Hamed Lamei Ramandi, UNSW Sydney Evaluation of smartphone photogrammetry for 3D surface roughness computation Kunze Li, UNSW Sydney An improved hydro-mechanical model for 3D rough-walled rock joints considering contact area during shearing Xu Zhu, UNSW Sydney Estimation of rock brittleness for jointed specimens under cyclic triaxial loading* Phibe Khalkho, Indian Institute of Technology, Roorkee Development of a visual measurement system of geomaterials under triaxial compression Takahisa Endo, Nihon University Development of new performance prediction models for a raise boring machine based on indentation tests* Aydin Shaterpour Mamaghani, Istanbul Technical University Using a Schmidt hammer to estimate geotechnical properties of carbonate rocks in Israel Dagan Bakun-Mazor, Shamoon College of Engineering (SCE)
12:45 PM - 1:45 PM	Day 2 \| Lunch
1:45 PM - 3:45 PM	Session 7b \| Slope stability Sponsored By Session 7b \| Session Chair Simit Raval, UNSW Sydney Session 7b \| Session Chair Kathryn Young, BHP Generation of 3D planar failure hazard maps for pit slope management David Tennant, Newcrest Mining Limited Slope radar monitoring – A partnership and infrastructure case study of scalability, reliability and availability Rebecca Dixon, BHP Slope radar monitoring – A partnership and infrastructure case study of scalability, reliability and availability Lincoln Tovey, BHP Australia Optimal slope profiles for maximum mine pit-wall steepness in Banded Iron Formation rocks* Stefano Utili, OptimalSlope Ltd Photogrammetry-based mapping techniques in slope stability management David Wang, Inspiration Seven Pty Ltd Rock slope stability analysis of abandoned quarry wall applying Q-slope method: Singapore case study Winn Kar, Newcastle Australia Institute of Higher Education Risk management using a total monitoring approach to managing slope instability hazards in open pits Neal Harries, Hexagon
3:45 PM - 4:15 PM	Day 2 \| Afternoon Tea
4:15 PM - 5:15 PM	Session 8b \| Slope stability Sponsored By Session 8b \| Session Chair Matthew Woods, Newcrest Mining Limited Some considerations on rock slope stability issues in Afghanistan with emphasis on Kandahar Region Abdul Bari Jahed, University of the Ryukyus, Okinawa, Japan 3D limit equilibrium and finite element model development and calibration for coal mine slopes Glen Guy, Encompass Mining An analysis of impact of weak rock formation on mining-induced deformation of rock slope Clement Amagu Amagu, Rock Mechanics Laboratory, Graduate School Of Engineering, Hokkaido University
7:00 PM - 11:00 PM	Conference Dinner

Thursday, December 1, 2022

	Stream A	Stream B
8:00 AM - 8:30 AM	Day 3 \| Registration Opens and Arrival Networking
8:30 AM - 10:15 AM	Session 9 \| Opening Plenary Day 3 Welcome from AusRock 2022 Conference Chair Ismet Canbulat, UNSW Sydney Day 3 Welcome from AusRock 2022 Conference Chair Serkan Saydam, UNSW Sydney Keynote \| Evolution of ground support and issues in the current rockburst support systems Charlie Li, Norwegian University of Science and Technology (NTNU) Keynote \| Does a FOS of 1.2 mean your slope will be stable? Alison McQuillan, Rocscience Australia
10:15 AM - 10:45 AM	Day 3 \| Morning Tea
10:45 AM - 12:45 PM	Session 10a \| Ground support Sponsored By Session 10a \| Session Chair Anthony Bennett, Jennmar Australia Session 10a \| Session Chair Peter Craig, Jennmar Session 10a \| Session Chair Hao Zhai, Evolution Mining Ltd A global review of ground control challenges and geotechnical practices in sublevel caving mines* Alex Campbell, Rio Tinto Friction bolt performance over the past 10 years in Australian mines Damian Reardon, Dynamic Geotechs Assessing corrosion of reinforcement on a large scale Emma Jones, MineGeoTech Study of prevention methods for stress corrosion cracking in underground coal mines Honghao Chen, UNSW Sydney Admixture use in cemented rock fill Ben Roache, Neboro An empirical system for primary and secondary support in US coal mines* Zach Agioutantis, University Of Kentucky	Session 10b \| Mine design – geotechnical considerations Session 10b \| Session Chair Jason Emery, Optimum Geotechnics A case study of managing high consequence geotechnical risks in Queensland coal mines Kathryn Young, BHP Underground mining subsidence in mine planning and risk assessment Peter Cepuritis, Mining One Managing steep seam dips and floor shears related dragline bench and lowwall instabilities Jianping Li, BHP Integrated geotechnical audits and benchmarking for mining operations Meredith Goss, AMC Consultants Design, implementation and field performance of a face destress blasting technique for mine development Christopher Drover, Beck Engineering Pty Ltd Floor-bearing capacity John Watson, UNSW Sydney
12:45 PM - 1:45 PM	Day 3 \| Lunch
1:45 PM - 3:25 PM	Session 11a \| Mine design – geotechnical considerations Sponsored By Session 11a \| Session Chair David Evans, DSI Underground Session 11a \| Session Chair Chengguo Zhang, UNSW Sydney Estimation of horizontal stress magnitudes from borehole breakout data Joung Oh, UNSW Sydney Borehole deformation based in-situ stress estimation using televiewer data Mohammed Abdul Qadeer Siddiqui, UNSW Sydney Tight Slot Blasting for routine fault-slip seismicity control at Mt Charlotte Mine Peter Mikula, Mikula Geotechnics Pty Ltd Assessment of main factors contributing to the height of fracturing above longwall panels: a review and case-based numerical study Mingwei Chen, UNSW Sydney	Session 11b \| Numerical modelling Session 11b \| Session Chair Diana Mitchell (Carroll), Newcrest Mining Ltd Session 11b \| Session Chair Bre-Anne Sainsbury, Deakin University Consideration of asymmetric drive geometry and conditions on the loading capacity of pastefill barricades David Sainsbury, Geotechnica Vivien mine back analysis modelling to forecast ground conditions and ground support John Player, MineGeoTech Accelerated weathering simulation of four sedimentary rocks Hao Zhai, Evolution Mining Ltd Fluid flow in discontinuous porous media with special reference to block caving of mines Mohammad Vahab, UNSW Sydney
3:25 PM - 4:00 PM	Day 3 \| Afternoon Tea
4:00 PM - 5:30 PM	Session 12 \| Future of ground engineering panel and Conference Close Facilitator \| Future of ground engineering panel Murat Karakus, University of Adelaide Panellist \| Future of ground engineering panel Diana Mitchell (Carroll), Newcrest Mining Ltd Panellist \| Future of ground engineering panel Joung Oh, UNSW Sydney Panellist \| Future of ground engineering panel Patrycja Sheffield, Centennial Panellist \| Future of ground engineering panel Sarah Webster, Northparkes CMOC AusRock Presentation Awards and Conference Close Ismet Canbulat, UNSW Sydney AusRock Presentation Awards and Conference Close Serkan Saydam, UNSW Sydney

	Stream A	Stream B
8:00 AM - 8:30 AM	Day 3 \| Registration Opens and Arrival Networking
8:30 AM - 10:15 AM	Session 9 \| Opening Plenary Day 3 Welcome from AusRock 2022 Conference Chair Ismet Canbulat, UNSW Sydney Day 3 Welcome from AusRock 2022 Conference Chair Serkan Saydam, UNSW Sydney Keynote \| Evolution of ground support and issues in the current rockburst support systems Charlie Li, Norwegian University of Science and Technology (NTNU) Keynote \| Does a FOS of 1.2 mean your slope will be stable? Alison McQuillan, Rocscience Australia
10:15 AM - 10:45 AM	Day 3 \| Morning Tea
10:45 AM - 12:45 PM	Session 10a \| Ground support Sponsored By Session 10a \| Session Chair Anthony Bennett, Jennmar Australia Session 10a \| Session Chair Peter Craig, Jennmar Session 10a \| Session Chair Hao Zhai, Evolution Mining Ltd A global review of ground control challenges and geotechnical practices in sublevel caving mines* Alex Campbell, Rio Tinto Friction bolt performance over the past 10 years in Australian mines Damian Reardon, Dynamic Geotechs Assessing corrosion of reinforcement on a large scale Emma Jones, MineGeoTech Study of prevention methods for stress corrosion cracking in underground coal mines Honghao Chen, UNSW Sydney Admixture use in cemented rock fill Ben Roache, Neboro An empirical system for primary and secondary support in US coal mines* Zach Agioutantis, University Of Kentucky	Session 10b \| Mine design – geotechnical considerations Session 10b \| Session Chair Jason Emery, Optimum Geotechnics A case study of managing high consequence geotechnical risks in Queensland coal mines Kathryn Young, BHP Underground mining subsidence in mine planning and risk assessment Peter Cepuritis, Mining One Managing steep seam dips and floor shears related dragline bench and lowwall instabilities Jianping Li, BHP Integrated geotechnical audits and benchmarking for mining operations Meredith Goss, AMC Consultants Design, implementation and field performance of a face destress blasting technique for mine development Christopher Drover, Beck Engineering Pty Ltd Floor-bearing capacity John Watson, UNSW Sydney
12:45 PM - 1:45 PM	Day 3 \| Lunch
1:45 PM - 3:25 PM	Session 11a \| Mine design – geotechnical considerations Sponsored By Session 11a \| Session Chair David Evans, DSI Underground Session 11a \| Session Chair Chengguo Zhang, UNSW Sydney Estimation of horizontal stress magnitudes from borehole breakout data Joung Oh, UNSW Sydney Borehole deformation based in-situ stress estimation using televiewer data Mohammed Abdul Qadeer Siddiqui, UNSW Sydney Tight Slot Blasting for routine fault-slip seismicity control at Mt Charlotte Mine Peter Mikula, Mikula Geotechnics Pty Ltd Assessment of main factors contributing to the height of fracturing above longwall panels: a review and case-based numerical study Mingwei Chen, UNSW Sydney	Session 11b \| Numerical modelling Session 11b \| Session Chair Diana Mitchell (Carroll), Newcrest Mining Ltd Session 11b \| Session Chair Bre-Anne Sainsbury, Deakin University Consideration of asymmetric drive geometry and conditions on the loading capacity of pastefill barricades David Sainsbury, Geotechnica Vivien mine back analysis modelling to forecast ground conditions and ground support John Player, MineGeoTech Accelerated weathering simulation of four sedimentary rocks Hao Zhai, Evolution Mining Ltd Fluid flow in discontinuous porous media with special reference to block caving of mines Mohammad Vahab, UNSW Sydney
3:25 PM - 4:00 PM	Day 3 \| Afternoon Tea
4:00 PM - 5:30 PM	Session 12 \| Future of ground engineering panel and Conference Close Facilitator \| Future of ground engineering panel Murat Karakus, University of Adelaide Panellist \| Future of ground engineering panel Diana Mitchell (Carroll), Newcrest Mining Ltd Panellist \| Future of ground engineering panel Joung Oh, UNSW Sydney Panellist \| Future of ground engineering panel Patrycja Sheffield, Centennial Panellist \| Future of ground engineering panel Sarah Webster, Northparkes CMOC AusRock Presentation Awards and Conference Close Ismet Canbulat, UNSW Sydney AusRock Presentation Awards and Conference Close Serkan Saydam, UNSW Sydney

	Stream A
8:00 AM - 8:30 AM	Day 3 \| Registration Opens and Arrival Networking
8:30 AM - 10:15 AM	Session 9 \| Opening Plenary Day 3 Welcome from AusRock 2022 Conference Chair Ismet Canbulat, UNSW Sydney Day 3 Welcome from AusRock 2022 Conference Chair Serkan Saydam, UNSW Sydney Keynote \| Evolution of ground support and issues in the current rockburst support systems Charlie Li, Norwegian University of Science and Technology (NTNU) Keynote \| Does a FOS of 1.2 mean your slope will be stable? Alison McQuillan, Rocscience Australia
10:15 AM - 10:45 AM	Day 3 \| Morning Tea
10:45 AM - 12:45 PM	Session 10a \| Ground support Sponsored By Session 10a \| Session Chair Anthony Bennett, Jennmar Australia Session 10a \| Session Chair Peter Craig, Jennmar Session 10a \| Session Chair Hao Zhai, Evolution Mining Ltd A global review of ground control challenges and geotechnical practices in sublevel caving mines* Alex Campbell, Rio Tinto Friction bolt performance over the past 10 years in Australian mines Damian Reardon, Dynamic Geotechs Assessing corrosion of reinforcement on a large scale Emma Jones, MineGeoTech Study of prevention methods for stress corrosion cracking in underground coal mines Honghao Chen, UNSW Sydney Admixture use in cemented rock fill Ben Roache, Neboro An empirical system for primary and secondary support in US coal mines* Zach Agioutantis, University Of Kentucky
12:45 PM - 1:45 PM	Day 3 \| Lunch
1:45 PM - 3:25 PM	Session 11a \| Mine design – geotechnical considerations Sponsored By Session 11a \| Session Chair David Evans, DSI Underground Session 11a \| Session Chair Chengguo Zhang, UNSW Sydney Estimation of horizontal stress magnitudes from borehole breakout data Joung Oh, UNSW Sydney Borehole deformation based in-situ stress estimation using televiewer data Mohammed Abdul Qadeer Siddiqui, UNSW Sydney Tight Slot Blasting for routine fault-slip seismicity control at Mt Charlotte Mine Peter Mikula, Mikula Geotechnics Pty Ltd Assessment of main factors contributing to the height of fracturing above longwall panels: a review and case-based numerical study Mingwei Chen, UNSW Sydney
3:25 PM - 4:00 PM	Day 3 \| Afternoon Tea
4:00 PM - 5:30 PM	Session 12 \| Future of ground engineering panel and Conference Close Facilitator \| Future of ground engineering panel Murat Karakus, University of Adelaide Panellist \| Future of ground engineering panel Diana Mitchell (Carroll), Newcrest Mining Ltd Panellist \| Future of ground engineering panel Joung Oh, UNSW Sydney Panellist \| Future of ground engineering panel Patrycja Sheffield, Centennial Panellist \| Future of ground engineering panel Sarah Webster, Northparkes CMOC AusRock Presentation Awards and Conference Close Ismet Canbulat, UNSW Sydney AusRock Presentation Awards and Conference Close Serkan Saydam, UNSW Sydney

	Stream B
8:00 AM - 8:30 AM	Day 3 \| Registration Opens and Arrival Networking
8:30 AM - 10:15 AM	Session 9 \| Opening Plenary Day 3 Welcome from AusRock 2022 Conference Chair Ismet Canbulat, UNSW Sydney Day 3 Welcome from AusRock 2022 Conference Chair Serkan Saydam, UNSW Sydney Keynote \| Evolution of ground support and issues in the current rockburst support systems Charlie Li, Norwegian University of Science and Technology (NTNU) Keynote \| Does a FOS of 1.2 mean your slope will be stable? Alison McQuillan, Rocscience Australia
10:15 AM - 10:45 AM	Day 3 \| Morning Tea
10:45 AM - 12:45 PM	Session 10b \| Mine design – geotechnical considerations Session 10b \| Session Chair Jason Emery, Optimum Geotechnics A case study of managing high consequence geotechnical risks in Queensland coal mines Kathryn Young, BHP Underground mining subsidence in mine planning and risk assessment Peter Cepuritis, Mining One Managing steep seam dips and floor shears related dragline bench and lowwall instabilities Jianping Li, BHP Integrated geotechnical audits and benchmarking for mining operations Meredith Goss, AMC Consultants Design, implementation and field performance of a face destress blasting technique for mine development Christopher Drover, Beck Engineering Pty Ltd Floor-bearing capacity John Watson, UNSW Sydney
12:45 PM - 1:45 PM	Day 3 \| Lunch
1:45 PM - 3:25 PM	Session 11b \| Numerical modelling Session 11b \| Session Chair Diana Mitchell (Carroll), Newcrest Mining Ltd Session 11b \| Session Chair Bre-Anne Sainsbury, Deakin University Consideration of asymmetric drive geometry and conditions on the loading capacity of pastefill barricades David Sainsbury, Geotechnica Vivien mine back analysis modelling to forecast ground conditions and ground support John Player, MineGeoTech Accelerated weathering simulation of four sedimentary rocks Hao Zhai, Evolution Mining Ltd Fluid flow in discontinuous porous media with special reference to block caving of mines Mohammad Vahab, UNSW Sydney
3:25 PM - 4:00 PM	Day 3 \| Afternoon Tea
4:00 PM - 5:30 PM	Session 12 \| Future of ground engineering panel and Conference Close Facilitator \| Future of ground engineering panel Murat Karakus, University of Adelaide Panellist \| Future of ground engineering panel Diana Mitchell (Carroll), Newcrest Mining Ltd Panellist \| Future of ground engineering panel Joung Oh, UNSW Sydney Panellist \| Future of ground engineering panel Patrycja Sheffield, Centennial Panellist \| Future of ground engineering panel Sarah Webster, Northparkes CMOC AusRock Presentation Awards and Conference Close Ismet Canbulat, UNSW Sydney AusRock Presentation Awards and Conference Close Serkan Saydam, UNSW Sydney

You need to enable JavaScript to access this site.

Follow these instructions on how to enable JavaScript.

Internet Explorer

Select Tools from the top menu
Choose Internet Options
Click on the Security tab
Click on Custom Level
Scroll down until you see the section labelled Scripting
Under Active Scripting, select Enable and click OK

Google Chrome

Select the menu icon on the browser toolbar
Select Settings
Click the Show advanced settings... link then Content Settings in the Privacy section
Select Allow all sites to run JavaScript (recommended) and click Done

Safari (Mac)

Select Safari from the top menu
Choose Preferences
Choose Security
Select the checkbox next to Enable JavaScript