Program
Below is the conference program for Met Plant 2019.
Click on each session to view the presenters and their abstract
The eight keynote speakers featured in the MetPlant program will be presenting on the challenges and possible solutions to innovation and collaboration in the mineral processing sector as well as redefining the measurements used to evaluate project success in this modern era
Note: the program is subject to change at any time at the disrection of the organising committee.
Sunday, September 8, 2019
| 4:20 PM - 6:00 PM |
GD Delprat Distinguished Lecture - J.P. Franzidis
|
| 6:00 PM - 7:00 PM |
MetPlant Welcome Reception - Sponsored by Glencore Technology
|
| 4:20 PM - 6:00 PM |
GD Delprat Distinguished Lecture - J.P. Franzidis
|
| 6:00 PM - 7:00 PM |
MetPlant Welcome Reception - Sponsored by Glencore Technology
|
| 4:20 PM - 6:00 PM |
GD Delprat Distinguished Lecture - J.P. Franzidis
|
| 6:00 PM - 7:00 PM |
MetPlant Welcome Reception - Sponsored by Glencore Technology
|
Monday, September 9, 2019
| 8:30 AM - 8:50 AM | Conference Opening |
| 8:50 AM - 9:20 AM | Keynote Presentation 1: John Vagenas, Metallurgical Systems |
| 9:20 AM - 10:00 AM | Session 1: Transformational Case Studies |
| 10:00 AM - 10:15 AM |
Q&A - Transformational Case Studies
|
| 10:15 AM - 10:45 AM | Day 1 - Morning Tea & ePoster presentations |
| 10:45 AM - 11:20 AM | Keynote Presentation 2: Greg Lane, Ausenco |
| 11:20 AM - 12:20 PM | Session 2: Plant Design I |
| 12:20 PM - 12:40 PM |
Q&A - Plant Design I
|
| 12:40 PM - 1:40 PM | Day 1 - Lunch & ePoster presentations |
| 1:40 PM - 2:10 PM | Keynote Presentation 3: Joe Pease, Mineralis |
| 2:10 PM - 2:50 PM | Session 3: Plant Design II |
| 3:10 PM - 3:25 PM |
Q&A - Plant Design II
|
| 3:25 PM - 3:55 PM |
Day 1 Afternoon Tea & Exhibition
|
| 3:55 PM - 4:25 PM | Keynote Presentation 4: John Ralston, UniSA |
| 4:25 PM - 5:25 PM | Session 4: Flotation and Surface Chemistry |
| 5:25 PM - 5:40 PM |
Q&A - Flotation and Surface Chemistry
|
| 5:40 PM - 5:45 PM |
Day 1 Closing Remarks
|
| 5:45 PM - 7:00 PM |
Networking Drinks
|
| 7:00 PM - 10:00 PM |
Conference Dinner
|
| 8:30 AM - 8:50 AM | Conference Opening |
| 8:50 AM - 9:20 AM | Keynote Presentation 1: John Vagenas, Metallurgical Systems |
| 9:20 AM - 10:00 AM | Session 1: Transformational Case Studies |
| 10:00 AM - 10:15 AM |
Q&A - Transformational Case Studies
|
| 10:15 AM - 10:45 AM | Day 1 - Morning Tea & ePoster presentations |
| 10:45 AM - 11:20 AM | Keynote Presentation 2: Greg Lane, Ausenco |
| 11:20 AM - 12:20 PM | Session 2: Plant Design I |
| 12:20 PM - 12:40 PM |
Q&A - Plant Design I
|
| 12:40 PM - 1:40 PM | Day 1 - Lunch & ePoster presentations |
| 1:40 PM - 2:10 PM | Keynote Presentation 3: Joe Pease, Mineralis |
| 2:10 PM - 2:50 PM | Session 3: Plant Design II |
| 3:10 PM - 3:25 PM |
Q&A - Plant Design II
|
| 3:25 PM - 3:55 PM |
Day 1 Afternoon Tea & Exhibition
|
| 3:55 PM - 4:25 PM | Keynote Presentation 4: John Ralston, UniSA |
| 4:25 PM - 5:25 PM | Session 4: Flotation and Surface Chemistry |
| 5:25 PM - 5:40 PM |
Q&A - Flotation and Surface Chemistry
|
| 5:40 PM - 5:45 PM |
Day 1 Closing Remarks
|
| 5:45 PM - 7:00 PM |
Networking Drinks
|
| 7:00 PM - 10:00 PM |
Conference Dinner
|
| 8:30 AM - 8:50 AM | Conference Opening |
| 8:50 AM - 9:20 AM | Keynote Presentation 1: John Vagenas, Metallurgical Systems |
| 9:20 AM - 10:00 AM | Session 1: Transformational Case Studies |
| 10:00 AM - 10:15 AM |
Q&A - Transformational Case Studies
|
| 10:15 AM - 10:45 AM | Day 1 - Morning Tea & ePoster presentations |
| 10:45 AM - 11:20 AM | Keynote Presentation 2: Greg Lane, Ausenco |
| 11:20 AM - 12:20 PM | Session 2: Plant Design I |
| 12:20 PM - 12:40 PM |
Q&A - Plant Design I
|
| 12:40 PM - 1:40 PM | Day 1 - Lunch & ePoster presentations |
| 1:40 PM - 2:10 PM | Keynote Presentation 3: Joe Pease, Mineralis |
| 2:10 PM - 2:50 PM | Session 3: Plant Design II |
| 3:10 PM - 3:25 PM |
Q&A - Plant Design II
|
| 3:25 PM - 3:55 PM |
Day 1 Afternoon Tea & Exhibition
|
| 3:55 PM - 4:25 PM | Keynote Presentation 4: John Ralston, UniSA |
| 4:25 PM - 5:25 PM | Session 4: Flotation and Surface Chemistry |
| 5:25 PM - 5:40 PM |
Q&A - Flotation and Surface Chemistry
|
| 5:40 PM - 5:45 PM |
Day 1 Closing Remarks
|
| 5:45 PM - 7:00 PM |
Networking Drinks
|
| 7:00 PM - 10:00 PM |
Conference Dinner
|
Tuesday, September 10, 2019
| 8:15 AM - 8:20 AM |
Day 2 Welcome and Opening Remarks
|
| 8:20 AM - 8:25 AM |
Welcome from Breakfast Keynote Sponsor - Glencore Technology
|
| 8:24 AM - 9:55 AM |
Session 5: Keynotes to challenge current thinking
|
| 8:25 AM - 8:55 AM | Keynote Presentation 5: Kathy Ehrig, BHP |
| 8:55 AM - 9:25 AM | Keynote Presentation 6: Aidan Giblett, Newmont Goldcorp |
| 9:25 AM - 9:55 AM | Keynote Presentation 7: Dean David, Wood. |
| 9:55 AM - 10:20 AM |
Q&A - Keynotes to challenge current thinking
|
| 10:20 AM - 10:50 AM | Day 2 - Morning Tea & ePoster Presentations |
| 10:50 AM - 11:50 AM | Session 6: Optimisation of existing operations |
| 11:50 AM - 12:10 PM |
Q&A - Optimisation of Existing Operations
|
| 12:10 PM - 1:10 PM | Day 2 - Lunch & ePoster Presentations |
| 1:10 PM - 1:40 PM | Keynote Presentation 8: Stephen Morrell, SMC Testing Pty Ltd |
| 1:40 PM - 2:40 PM | Session 7: Implementation of technology |
| 2:40 PM - 3:00 PM |
Q&A - Implementation of technology
|
| 3:00 PM - 3:20 PM |
Day 2 Afternoon Tea & Exhibition
|
| 3:20 PM - 3:45 PM | Keynote Presentation 9: Peter Munro, Mineralis Consultants |
| 3:45 PM - 4:25 PM | Session 8: Control Methodologies and Plant Design III |
| 4:25 PM - 4:35 PM |
Q&A - CM & Plant Design III
|
| 4:35 PM - 4:45 PM |
Innovation award presentation
|
| 4:45 PM - 4:50 PM |
Best paper and best presentation annoucement
|
| 4:50 PM - 4:55 PM |
Conference close
|
| 8:15 AM - 8:20 AM |
Day 2 Welcome and Opening Remarks
|
| 8:20 AM - 8:25 AM |
Welcome from Breakfast Keynote Sponsor - Glencore Technology
|
| 8:24 AM - 9:55 AM |
Session 5: Keynotes to challenge current thinking
|
| 8:25 AM - 8:55 AM | Keynote Presentation 5: Kathy Ehrig, BHP |
| 8:55 AM - 9:25 AM | Keynote Presentation 6: Aidan Giblett, Newmont Goldcorp |
| 9:25 AM - 9:55 AM | Keynote Presentation 7: Dean David, Wood. |
| 9:55 AM - 10:20 AM |
Q&A - Keynotes to challenge current thinking
|
| 10:20 AM - 10:50 AM | Day 2 - Morning Tea & ePoster Presentations |
| 10:50 AM - 11:50 AM | Session 6: Optimisation of existing operations |
| 11:50 AM - 12:10 PM |
Q&A - Optimisation of Existing Operations
|
| 12:10 PM - 1:10 PM | Day 2 - Lunch & ePoster Presentations |
| 1:10 PM - 1:40 PM | Keynote Presentation 8: Stephen Morrell, SMC Testing Pty Ltd |
| 1:40 PM - 2:40 PM | Session 7: Implementation of technology |
| 2:40 PM - 3:00 PM |
Q&A - Implementation of technology
|
| 3:00 PM - 3:20 PM |
Day 2 Afternoon Tea & Exhibition
|
| 3:20 PM - 3:45 PM | Keynote Presentation 9: Peter Munro, Mineralis Consultants |
| 3:45 PM - 4:25 PM | Session 8: Control Methodologies and Plant Design III |
| 4:25 PM - 4:35 PM |
Q&A - CM & Plant Design III
|
| 4:35 PM - 4:45 PM |
Innovation award presentation
|
| 4:45 PM - 4:50 PM |
Best paper and best presentation annoucement
|
| 4:50 PM - 4:55 PM |
Conference close
|
| 8:15 AM - 8:20 AM |
Day 2 Welcome and Opening Remarks
|
| 8:20 AM - 8:25 AM |
Welcome from Breakfast Keynote Sponsor - Glencore Technology
|
| 8:24 AM - 9:55 AM |
Session 5: Keynotes to challenge current thinking
|
| 8:25 AM - 8:55 AM | Keynote Presentation 5: Kathy Ehrig, BHP |
| 8:55 AM - 9:25 AM | Keynote Presentation 6: Aidan Giblett, Newmont Goldcorp |
| 9:25 AM - 9:55 AM | Keynote Presentation 7: Dean David, Wood. |
| 9:55 AM - 10:20 AM |
Q&A - Keynotes to challenge current thinking
|
| 10:20 AM - 10:50 AM | Day 2 - Morning Tea & ePoster Presentations |
| 10:50 AM - 11:50 AM | Session 6: Optimisation of existing operations |
| 11:50 AM - 12:10 PM |
Q&A - Optimisation of Existing Operations
|
| 12:10 PM - 1:10 PM | Day 2 - Lunch & ePoster Presentations |
| 1:10 PM - 1:40 PM | Keynote Presentation 8: Stephen Morrell, SMC Testing Pty Ltd |
| 1:40 PM - 2:40 PM | Session 7: Implementation of technology |
| 2:40 PM - 3:00 PM |
Q&A - Implementation of technology
|
| 3:00 PM - 3:20 PM |
Day 2 Afternoon Tea & Exhibition
|
| 3:20 PM - 3:45 PM | Keynote Presentation 9: Peter Munro, Mineralis Consultants |
| 3:45 PM - 4:25 PM | Session 8: Control Methodologies and Plant Design III |
| 4:25 PM - 4:35 PM |
Q&A - CM & Plant Design III
|
| 4:35 PM - 4:45 PM |
Innovation award presentation
|
| 4:45 PM - 4:50 PM |
Best paper and best presentation annoucement
|
| 4:50 PM - 4:55 PM |
Conference close
|
