Keynote Session 3 Q&A
Erick Ramanaidou, CSIRO Mineral Resources

Keynote Session 2: Q&A
Keith Vining, CSIRO Mineral Resources

Design considerations for an iron tailings filtration plant and their conveying and disposal systems
Jorge Barrera, Fluor

Iron-ore tailings and value addition – A short review
Kaushika Hazarika MAusIMM, Roy Hill and Murdoch University

Mining Iron Ore from Tailings with Minimal Use of Process Water
Yee-Kwong Leong MAusIMM, The University of Western Australia

Processing of unsaleable ultrafines to potentially reduce the volume of iron ore tailings
Elardus Mare MAusIMM, Sedgman

Challenges in Designing a Magnetic Resonance Logging-While-Drilling Tool for Iron Ore Exploration
Keelan O'Neill, University Western Australia

Improving drill productivity and delivering better geophysical data faster
Darren Palmer AAusIMM, RIG Technologies

Geophysical blast hole sampling
Clayton Simpson MAusIMM, Fortescue Metals Group Ltd

Geophysical log applications to geological and geotechnical assessment
Binzhong Zhou, CSIRO Mineral Resources

Reproduction of Inequality Constraint between Iron and Silica for Accurate Production Scheduling
Sultan Abulkhair, Nazarbayev University

Improved sustainability through WHIMS Plant addition at Roy Hill
Clinton Jenkins, Roy Hill

Positive Influence of WHIMS Concentrate on the Sintering Performance of Roy Hill Fines
James Manuel, CSIRO Mineral Resources

3D geological model and structural analysis of the Neoarchean to Paleoproterozoic Hamersley Basin, Western Australia
Nishka Piechocka, CSIRO

Exploration Advances: MinEx CRC’S mission
Andrew Bailey FAusIMM, MinEx CRC

A new look at detrital iron deposit geology in the Hamersley Province of Western Australia
John Clout, Clout Mining

CHARACTERISATION OF SFCA PHASES IN IRON ORE SINTER BY COMBINED OPTICAL MICROSCOPY AND EPMA)
Sarath Hapugoda, CSIRO

ANCIENT TO MODERN IRONMAKING: Effect of Calcium Oxalate
Sarath Hapugoda, CSIRO

Application of Cold Bonding Technology to High Grade Iron Ore Concentrate
Josiane Caron, Quebec Iron Ore

Influence of the occurrence state of Al2O3 on the metallurgical performance of product sinter
Congcong Yang, Central South University

Bulk Carrier Vessel Tracking Automation – The Dalrymple Bay Use Case
Jochen Franke, Frontier Automation

Implementing condition-based wear surface management
Piero Velletri, Metso Outotec

Application of a Reinforcement Learning AI Solution for Optimisation of Screening Shuttles Control
Bruno Versiani, BHP

Fused sensors for slope deformation monitoring
Marc Elmouttie, CSIRO

Microseismic monitoring for open pit slope stability and rock fall detection
Xun Luo, CSIRO

Improving compliance in mining through an effective geoscientific information management framework
Steve Mundell, acQuire Technology Solutions

Managing Continuous Improvement of Mine to Mill begins with Measurement
Rangan Ramanathan, Hexagon

Dealing with uncertainties on mining equipment fleet planning and usage
Igor Souza, Vale S.A

Innovation for a 93-year old icon - RFDS
Rebecca Tomkinson, Royal Flying Doctors Services

REFLUX vs Hydraulic classifier: A comparative analysis for hematite concentrate cleaning
Benjamin Légaré, Quebec Iron Ore

Beneficiation Strategies for Removal of Silica and Alumina from Low-Grade Iron Ores
Venkata Nunna, CSIRO

Where DEM and SPH Collide - Wet Screening Optimisation with Numeric Tools
Jens Plinke, Tunra Bulk Solids

Testing and modelling of diverse iron ore slurries for pipeline friction and pump head derate
Robert Visintainer, GIW Industries Inc.

Sinter analogues mineralogy by different heating conditions
Thi Bang Tuyen Nguyen, University Of Newcastle

Analyses of Pressure drop in High Temperature Zone during Iron Ore Sintering
Tejbir Singh, Centre for Ironmaking Materials Research, University Of Newcastle

An Innovative Application of Gravity Separation Technology to Beneficiate Ultrafine Iron Ore
Dustin Pepper, Mineral Technologies

Dry Concentration of Low Grade Magnetic Iron Ores
Bob Kelly, Cyclomag P/L

Molecular modelling applied to the flotation of iron ores
Juliette Lainé, Université De Lorraine & Arcelormittal Global R&d

Real time phosphorus analysis using GEOSCAN analysers at Assmang Khumani Mine in the Northern Cape
Luke Balzan, Scantech International

Advances in Downhole Assay Measurements and Calibration Techniques
Jennifer Market, Mpc Kinetic

Keynote Presentation 8: Vision for the industry: turning ambitions to realities
Robin Batterham FAusIMM, University of Melbourne

Replacement of PCI with hydrogen and its impact on blast furnace internal conditions
Nathan Barrett AAusIMM, Centre For Ironmaking Materials Research (cimr)

Acceleration of Oxidation Reaction of Iron-bearing Materials by using Biomass char in Sintering Bed
Taichi Murakami, Tohoku University

Sintering for Emissions Reduction
Geoff Beros MAusIMM, FMG

The production of green steel via HIsmelt
Neil Goodman MAusIMM, Smelt Tech Consulting

It never rains but it pours: Improving extreme-rainfall resilience in Australia’s iron ore regions
Jane Hodgkinson MAusIMM, CSIRO

Solar Processing of Iron Ores
Suneeti Purohit, CSIRO

Lime Magnetite Pellets - An Alternative Iron Ore Feedstock for Lower Carbon Footprint Ironmaking
Suneeti Purohit, CSIRO

Development of a Remotely Operated Robotic Mechanism for Accessing and Removal of Metal Tramp from Primary Gyratory Crushers
Adrian Mare, Metso:Outotec

Breakthrough in elliptical motion screen trial delivers significant performance gains
Doug Teyhan, Schenck Process

Development of a rail-running pipe conveyor for the iron ore industry
Craig Wheeler, The University Of Newcastle

Transformation of Automated Optical Image Analysis Software Mineral4/Recognition4 to Mineral5/Recognition5
Eugene Donskoi, CSIRO

Liberation characteristics of comminuted ore types of the Per Geijer iron-oxide apatite deposits.
Patrick Krolop, LKAB

Mineral Chemistry of Iron Oxides in the Leveäniemi Iron Ore Deposit in Northern Sweden.
Adrian Larsson, LKAB

Spatial distribution of major, minor and trace elements in Iron Ores, using micro-XRF technology
Naomi Potter, Portable Spectral Services

Keynote Presentation 12: Iron ore industry status and furture in China.
Professor Deqing Zhu, Central South University

Keynote Presentation 13: Geoscience enabling sustainability
Kerry Turnock MAusIMM, BHP

Keynote Presentation 2: Data Quantity, Quality and Possibilities
Asmita Mahanta, BHP

Keynote Presentation 5: Green Steel - The question is not ‘is it possible’ but rather ‘how to make it possible’
Nicole Roocke, Minerals Research Institute of Western Australia

Keynote Presentation 6: Navigating disruption and uncertainty in the iron ore value chain – an OEM perspective
Stuart Sneyd, Metso Outotec

Keynote Presentation 11: Decarbonizing steel production - a global challenge
Christian Boehm, Primetals

Keynote Presentation 9: Net-zero pathways: Decarbonization of our business
Gerard Danckert, Rio Tinto

Keynote Presentation 10: De-risking technology pathways to decarbonise the heavy industrial sector
Trish White AM, Heavy Industry Low-carbon Transition (HILT) CRC